NEC Np600 Projector User Manual

42
4. Convenient Features
Network Settings
http:// /index.html
DHCP...................................Enabling . this . option . automatically . assigns . an . IP . address . to . the . projector . from . your . DHCP . server. .
Disabling . this . option . allows . you . to . register . the . IP . address . or . subnet . mask . number . obtained . from .
your . network . administrator.
NOTE:
The IP address of the projector is required to change the network settin\
g.
The IP address will not be displayed...

4
4. Convenient Features
Alert Mal Settng
http:// /lanconfig.html
This option notifies your computer of an error message via e-mail when using wired LAN. An error message notification 
will be sent when the projector lamp has reached the end of its usable life or an error occurs in the projector.
HOST NAME  ............................Type in the hostname of the network connected to the projector. Up to 60 alphanumeric characters 
can be used.
DOMAIN NAME   ........................Type...

44
4. Convenient Features
 Using the VGA Signal Cable to Operate the Projector 
(Virtual Remote)
Overvew
The projector supports DDC/CI (Display Data Channel Command Interface) that is a standard interface for bidirectional 
communication between display/projector and computer. 
The optional utility software “Virtual Remote Tool” designed exclusively for our projector is required to use DDC/CI.
Check with our website.
http://www.nec-pj.com 
NOTE: Use the supplied VGA signal cable to connect the...

45
5. Using On-Screen Menu
1 Using the Menus
NOTE: The on-screen menu may not be displayed correctly while interlaced motion video image is projected.
1. Press the MENU button on the remote control or the projector cabinet to display the menu.
NOTE: The commands such as ENTER, EXIT, ,  in the bottom show available buttons for your operation.
2.  Press the SELECT 
 buttons on the remote control or the projector cabinet to display the submenu.
3.  Press the ENTER button on the remote control or the...

46
5. Using On-Screen Menu
2 Menu Elements
Slide bar
Solid triangle
Tab
Radio button
High Altitude symbol
Menu windows or dialog boxes typically have the following elements:
Highlight..............................Indicates . the . selected . menu . or . item. .
Solid
.
triangle
....................... Indicates . further . choices . are . available. . A . highlighted . triangle . indicates . the . item . is . active. .
Tab.......................................Indicates . a . group . of . features . in...

47
5. Using On-Screen Menu
 List of Menu Items
Some menu items are not available depending on the input source.
Menu ItemDefaultOptions
SOURCE
COMPUTER1*COMPUTER2(DIGITAL)*COMPUTER2(ANALOG)*VIDEO*S-VIDEO*
ADJUST
PICTURE
PRESET*1-6
DETAIL SETTINGS
GENERAL
REFERENCE*HIGH-BRIGHT, PRESENTATION, VIDEO, MOVIE, GRAPHIC, sRGBGAMMA CORRECTIONDYNAMIC, NATURAL, BLACK DETAIL
COLOR TEMPERATURE*5000, 6500, 7800, 8500, 9300, 10500
WHITE BALANCE0
CONTRAST R0CONTRAST G0CONTRAST B0BRIGHTNESS R0
BRIGHTNESS G0
BRIGHTNESS...

48
5. Using On-Screen Menu
SETUP
OPTIONS(1)
AUTO ADJUSTNORMALOFF, NORMAL, FINEFAN MODEAUTOAUTO, HIGH, HIGH ALTITUDE
SIGNAL SELECT
COMPUTER1RGB/COMPONENTRGB/COMPONENT, RGB, COMPONENT
COMPUTER2 (ANALOG)RGB/COMPONENTRGB/COMPONENT, RGB, COMPONENT
VIDEOAUTOAUTO, NTSC3.58, NTSC4.43, PAL, PAL-M, PAL-N, PAL60, SECAM
S-VIDEOAUTOAUTO, NTSC3.58, NTSC4.43, PAL, PAL-M, PAL-N, PAL60, SECAM
WXGA MODENP600/NP500/NP400: OFF NP500W: ONOFF, ON
DEINTERLACEONOFF, ONBEEPONOFF, ON
OPTIONS(2)
OFF TIMEROFFOFF, 0:30, 1:00, 2:00,...

49
5. Using On-Screen Menu
 Menu Descriptions & Functions [SOURCE]
COMPUTER
Selects the computer connected to your COMPUTER 1 IN input connector.
NOTE:
• When the component input signal is connected to the COMPUTER 1 IN connec\
tor, select [COMPUTER1].
•  The projector will determine if the input signal is RGB or component sig\
nal.
COMPUTER (DIGITAL & ANALOG)
Selects the computer connected to your COMPUTER 2 IN (DVI-I) connector.
VIDEO
Selects what is connected to your VIDEO input-VCR, DVD...

50
5. Using On-Screen Menu
 Menu Descriptions & Functions [ADJUST]
[PICTURE]
[PRESET]
This function allows you to select optimized settings for your projected image.
You can adjust neutral tint for yellow, cyan or magenta. 
There are six factory presets optimized for various types of images. You can also use [DETAIL SETTINGS] to set user 
adjustable settings to customize each gamma or color.
Your settings can be stored in [PRESET 1] to [PRESET 6].
HIGH-BRIGHT ........Recommended for use in a brightly...

5
5. Using On-Screen Menu
[GENERAL]
Storng Your Customzed Settngs [REFERENCE]
This function allows you to store your customized settings in [PRESET 1] to [PRESET 6].
First, select a base preset mode from [REFERENCE], then set [GAMMA CORRECTION] and [COLOR TEMPERA-
TURE]. 
HIGH-BRIGHT ........Recommended for use in a brightly lit room.
PRESENTATION  .....Recommended for making a presentation using a PowerPoint file.
VIDEO  ....................Recommended for typical TV program...