NEC Np510w Projector User Manual

							
42
4. Convenient Features
Network Settings
http:// /index.html
DHCP...................................Enabling . this . option . automatically . assigns . an . IP . address . to . the . projector . from . your . DHCP . server. .
Disabling . this . option . allows . you . to . register . the . IP . address . or . subnet . mask . number . obtained . from .
your . network . administrator.
NOTE:
The IP address of the projector is required to change the network settin\
g.
The IP address will not be displayed on the projector’s menu.
Consult your network administrator for the IP address when [ENABLE] is s\
elected for [DHCP].
IP
.
ADDRESS
........................ Set . your . IP . address . of . the . network . connected . to . the . projector . when . [DISABLE] . is . selected . for .
[DHCP].
SUBNET
.
MASK
.................... Set . your . subnet . mask . number . of . the . network . connected . to . the . projector . when . [DISABLE] . is . selected .
for . [DHCP].
DEFAULT. GATEWAY................. Set . your . default . gateway . of . the . network . connected . to . the . projector . when . [DISABLE] . is . selected . for .
[DHCP].
DNS
.
(PRIMARY)
.................. Set . your . primary . DNS . settings . of . the . network . connected . to . the . projector.
DNS. (SECONDARY)..................Set. your . secondary . DNS . settings . of . the . network . connected . to . the . projector.
UPDATE...............................Reflect . your . settings.
NOTE:  Close  the  browser  after  clicking  [UPDATE].  The  projector  will  automatically  update  your 
settings.
TIP: Selecting [NETWORK SETTINGS] for [RESET] from the projector’s menu allows you to return the following items to the factory 
default.
[DHCP]: DISABLE
[IP ADDRESS]: 192.168.0.10
[SUBNET MASK]: 255.255.255.0
[DEFAULT GATEWAY]: 192.168.01
*[DNS(PRIMARY)] and [DNS(SECONDARY)] will remain unchanged. 
						

							
4
4. Convenient Features
Alert Mal Settng
http:// /lanconfig.html
This option notifies your computer of an error message via e-mail when using wired LAN. An error message notification 
will be sent when the projector lamp has reached the end of its usable life or an error occurs in the projector.
HOST NAME  ............................Type in the hostname of the network connected to the projector. Up to 60 alphanumeric characters 
can be used.
DOMAIN NAME   ........................Type  in  the  domain  name  of  the  network  connected  to  the  projector.  Up  to  60  alphanumeric 
characters can be used.
ALERT MAIL  .............................Checking [ENABLE] will turn on the Alert Mail feature. 
Checking [DISABLE] will turn off the Alert Mail feature.
SENDER’S ADDRESS  ................Type in the senders address. Up to 60 alphanumeric and symbols characters can be used.
SMTP SERVER NAME  ...............Type in the SMTP server name to be connected to the projector. Up to 60 alphanumeric characters 
can be used.
RECIPIENT’S ADDRESS 1 to 3  ....Type in your recipient’s address. Up to 60 alphanumeric and symbols characters can be used.
APPLY  .......................................Click this button to reflect the above settings
EXECUTE  ..................................Click this button to send a test mail to check if your settings are corr\
ect.
STATUS  .....................................A reply to a test mail will be displayed.
NOTE:
•  If you execute a test, you may not receive an Alert mail. Should this ha\
ppen, check if the network settings are correct.
•  If you entered an incorrect address in a test, you may not receive an Alert mail. Should this happen, check if the Recipient ’s Ad
-
dress is correct
TIP: The Alert Mail settings will not be affected even when [RESET] is done f\
rom the menu. 
						

							
44
4. Convenient Features
 Using the VGA Signal Cable to Operate the Projector 
(Virtual Remote)
Overvew
The projector supports DDC/CI (Display Data Channel Command Interface) that is a standard interface for bidirectional 
communication between display/projector and computer. 
The optional utility software “Virtual Remote Tool” designed exclusively for our projector is required to use DDC/CI.
Check with our website.
http://www.nec-pj.com 
NOTE: Use the supplied VGA signal cable to connect the COMPUTER 1 IN connector directly with the monitor output connector of 
the computer to use Virtual Remote Tool. Using a switcher, scan converter or other cables than the supplied VGA signal cable may 
cause failure in signal communication. 
						

							
45
5. Using On-Screen Menu
1 Using the Menus
NOTE: The on-screen menu may not be displayed correctly while interlaced motion video image is projected.
1. Press the MENU button on the remote control or the projector cabinet to display the menu.
NOTE: The commands such as ENTER, EXIT, ,  in the bottom show available buttons for your operation.
2.  Press the SELECT 
 buttons on the remote control or the projector cabinet to display the submenu.
3.  Press the ENTER button on the remote control or the projector cabinet to highlight the top item or the first 
tab.
4.  Use the SELECT 
 buttons on the remote control or the projector cabinet to select the item you want to 
adjust or set.
  You can use the SELECT 
 buttons on the remote control or the projector cabinet to select the tab you 
want.
5.  Press the ENTER button on the remote control or the projector cabinet to display the submenu window.
6.  Adjust  the  level  or  turn  the  selected  item  on  or  off  by  using  the  SELECT 
  buttons  on  the  remote 
control or the projector cabinet.
Changes are stored until adjusted again.
7.  Repeat steps 2 -6 to adjust an additional item, or press the EXIT button on the remote control or the projec
-
tor cabinet to quit the menu display.
NOTE: When a menu or message is displayed, several lines of information may be lost, depending on the signal or settings.
8.   Press the MENU button to close the menu.
  To return to the previous menu, press the EXIT button. 
						

							
46
5. Using On-Screen Menu
2 Menu Elements
Slide bar
Solid triangle
Tab
Radio button
High Altitude symbol
Menu windows or dialog boxes typically have the following elements:
Highlight..............................Indicates . the . selected . menu . or . item. .
Solid
.
triangle
....................... Indicates . further . choices . are . available. . A . highlighted . triangle . indicates . the . item . is . active. .
Tab.......................................Indicates . a . group . of . features . in . a . dialog . box. . Selecting . on . any . tab . brings . its . page . to . the . front.
Radio . button
........................ Use . this . round . button . to . select . an . option . in . a . dialog . box.
Source.................................Indicates . the . currently . selected . source.
Off
.
Timer . remaining . time
.....Indicates . the . remaining . countdown . time . when . the . [OFF . TIMER] . is . preset.
Slide
.
bar
.............................. Indicates . settings . or . the . direction . of . adjustment.
Key
.
Lock . symbol
................. Indicates . the . [CONTROL . PANEL . LOCK] . is . enabled.
Thermometer
.
symbol
.......... Indicates . the . lamp . mode . is . forcibly . set . to . [ECO] . mode . because . the . internal . temperature . is . too .
high.
High
.
Altitude
.
symbol
........... Indicates . the . [FAN . MODE] . is . set . to . [HIGH . ALTITUDE] . mode.
Source
Available buttons
Thermometer symbol
Key Lock symbol
Off Timer remaining time
Highlight 
						

							
47
5. Using On-Screen Menu
 List of Menu Items
Some menu items are not available depending on the input source.
Menu ItemDefaultOptions
SOURCE
COMPUTER1*COMPUTER2(DIGITAL)*COMPUTER2(ANALOG)*VIDEO*S-VIDEO*
ADJUST
PICTURE
PRESET*1-6
DETAIL SETTINGS
GENERAL
REFERENCE*HIGH-BRIGHT, PRESENTATION, VIDEO, MOVIE, GRAPHIC, sRGBGAMMA CORRECTIONDYNAMIC, NATURAL, BLACK DETAIL
COLOR TEMPERATURE*5000, 6500, 7800, 8500, 9300, 10500
WHITE BALANCE0
CONTRAST R0CONTRAST G0CONTRAST B0BRIGHTNESS R0
BRIGHTNESS G0
BRIGHTNESS B0
CONTRASTBRIGHTNESSSHARPNESSCOLORHUERESET
IMAGE OPTIONS
CLOCK*PHASE*HORIZONTAL*VERTICAL*OVERSCAN*0[%], 5[%], 10[%]
ASPECT RATIO*NP600/NP500/NP400:AUTO, 4:3, 16:9, 15:9, 16:10, WIDE ZOOM, NATIVE
*NP500W: AUTO, 4:3, 16:9, 15:9, 16:10, LETTERBOX, NATIVEPOSITION0(Not available on NP500W)VIDEO FILTER*OFF, LESS, MORE
SETUP
GENERAL
AUTO KEYSTONEOFFOFF, ONKEYSTONE0KEYSTONE SAVEOFFOFF, ON
WALL COLOROFFOFF, WHITEBOARD, BLACKBOARD, BLACKBOARD (GRAY), LIGHT YELLOW, LIGHT GREEN, LIGHT BLUE, SKY BLUE, LIGHT ROSE, PINKLAMP MODENORMALNORMAL, ECO
CLOSED CAPTIONOFFOFF, CAPTION1, CAPTION2, CAPTION3, CAPTION4, TEXT1, TEXT2, TEXT3, TEXT4
LANGUAGEENGLISH
ENGLISH, DEUTSCH, FRANÇAIS, ITALIANO, ESPAÑOL, SVENSKA, 日本語DANSK, PORTUGUÊS, ČEŠTINA, MAGYAR, POLSKI, NEDERLANDS, SUOMINORSK, TÜRKÇE, РУССКИЙ, , Ελληνικά, 中文, 한국어
MENU
COLOR SELECTCOLORCOLOR, MONOCHROMEDISPLAY TIMEAUTO 45 SECMANUAL, AUTO  5 SEC, AUTO 15 SEC, AUTO 45 SECBACKGROUNDBLUEBLUE, BLACK, LOGOFILTER MESSAGE500[H]OFF, 100[H], 200[H], 500[H], 1000[H]ID DISPLAYONOFF, ON
INSTALLATION
ORIENTATIONDESKTOP FRONTDESKTOP FRONT, CEILING REAR, DESKTOP REAR, CEILING FRONTCONTROL PANEL LOCKOFFOFF, ONSECURITYOFFOFF, ONCOMMUNICATION SPEED19200bps4800bps, 9600bps, 19200bps
CONTROL IDCONTROL ID NUMBER11- 254
CONTROL IDOFFOFF, ON
* The asterisk (*) indicates that the default setting varies depending on the signal. 
						

							
48
5. Using On-Screen Menu
SETUP
OPTIONS(1)
AUTO ADJUSTNORMALOFF, NORMAL, FINEFAN MODEAUTOAUTO, HIGH, HIGH ALTITUDE
SIGNAL SELECT
COMPUTER1RGB/COMPONENTRGB/COMPONENT, RGB, COMPONENT
COMPUTER2 (ANALOG)RGB/COMPONENTRGB/COMPONENT, RGB, COMPONENT
VIDEOAUTOAUTO, NTSC3.58, NTSC4.43, PAL, PAL-M, PAL-N, PAL60, SECAM
S-VIDEOAUTOAUTO, NTSC3.58, NTSC4.43, PAL, PAL-M, PAL-N, PAL60, SECAM
WXGA MODENP600/NP500/NP400: OFF NP500W: ONOFF, ON
DEINTERLACEONOFF, ONBEEPONOFF, ON
OPTIONS(2)
OFF TIMEROFFOFF, 0:30, 1:00, 2:00, 4:00, 8:00, 12:00, 16:00STANDBY MODENORMALNORMAL, POWER-SAVINGAUTO POWER ON(AC)OFFOFF, ONAUTO POWER ON(COMP1)OFFOFF, ONAUTO POWER OFFOFFOFF, 0:05, 0:10, 0:20, 0:30
DEFAULT SOURCE SELECTLASTLAST, AUTO, COMPUTER1, COMPUTER2(DIGITAL), COMPUTER2(ANALOG), VIDEO, S-VIDEO
INFO.
USAGE TIMELAMP LIFE REMAININGLAMP HOURS USEDFILTER HOURS USED
SOURCE
SOURCE INDEXHORIZONTAL FREQUENCYVERTICAL FREQUENCYSIGNAL TYPEVIDEO TYPESYNC TYPESYNC POLARITYSCAN TYPE
WIRED LANPROJECTOR NAMEMAC ADDRESS
VERSION
PRODUCTSERIAL NUMBERFIRMWAREDATACONTROL ID (when [CONTROL ID] is set)
RESET
CURRENT SIGNALALL DATANETWORK SETTINGSCLEAR LAMP HOURSCLEAR FILTER HOURS 
						

							
49
5. Using On-Screen Menu
 Menu Descriptions & Functions [SOURCE]
COMPUTER
Selects the computer connected to your COMPUTER 1 IN input connector.
NOTE:
• When the component input signal is connected to the COMPUTER 1 IN connec\
tor, select [COMPUTER1].
•  The projector will determine if the input signal is RGB or component sig\
nal.
COMPUTER (DIGITAL & ANALOG)
Selects the computer connected to your COMPUTER 2 IN (DVI-I) connector.
VIDEO
Selects what is connected to your VIDEO input-VCR, DVD player or document camera.
S-VIDEO
Selects what is connected to your S-VIDEO input-VCR or DVD player.
NOTE: A frame may freeze for a brief period of time when a video is played back in fast-forward or fast-rewind with a Video or S-
Video source. 
						

							
50
5. Using On-Screen Menu
 Menu Descriptions & Functions [ADJUST]
[PICTURE]
[PRESET]
This function allows you to select optimized settings for your projected image.
You can adjust neutral tint for yellow, cyan or magenta. 
There are six factory presets optimized for various types of images. You can also use [DETAIL SETTINGS] to set user 
adjustable settings to customize each gamma or color.
Your settings can be stored in [PRESET 1] to [PRESET 6].
HIGH-BRIGHT ........Recommended for use in a brightly lit room.
PRESENTATION  .....Recommended for making a presentation using a PowerPoint file.
VIDEO  ....................Recommended for typical TV program viewing.
MOVIE  ...................Recommended for movies.
GRAPHIC  ...............Recommended for graphics.
sRGB  .....................Standard color values
[DETAIL SETTINGS] 
						

							
5
5. Using On-Screen Menu
[GENERAL]
Storng Your Customzed Settngs [REFERENCE]
This function allows you to store your customized settings in [PRESET 1] to [PRESET 6].
First, select a base preset mode from [REFERENCE], then set [GAMMA CORRECTION] and [COLOR TEMPERA-
TURE]. 
HIGH-BRIGHT ........Recommended for use in a brightly lit room.
PRESENTATION  .....Recommended for making a presentation using a PowerPoint file.
VIDEO  ....................Recommended for typical TV program viewing.
MOVIE  ...................Recommended for movies.
GRAPHIC  ...............Recommended for graphics.
sRGB  .....................Standard color values.
Selectng Gamma Correcton Mode [GAMMA CORRECTION]
Each mode is recommended for:
DYNAMIC  ..............Creates a high-contrast picture.
NATURAL  ...............Natural reproduction of the picture.
BLACK DETAIL  .......Emphasizes detail in dark areas of the picture.
Adjustng Color Temperature [COLOR TEMPERATURE]
This option allows you to select the color temperature of your choice.
NOTE: When [PRESENTATION] or [HIGH-BRIGHT] is selected in [REFERENCE], this function is not \
available.
Adjustng Whte Balance [WHITE BALANCE]
This  allows  you  to  adjust  the  white  balance.  Contrast  for  each  color  (RGB)  to  adjust  the  white  level  of  the  screen; 
Brightness for each color (RGB) is used to adjust the black level of the screen.
[CONTRAST]
Adjusts the intensity of the image according to the incoming signal.
[BRIGHTNESS]
Adjusts the brightness level or the back raster intensity.
[SHARPNESS]
Controls the detail of the image.
[COLOR]
Increases or decreases the color saturation level.
[HUE]
Varies the color level from +/- green to +/-blue. The red level is used as reference.
Input signalCONTRASTBRIGHTNESSSHARPNESSCOLORHUE
Computer (RGB DIGITAL)YesYesYesNoNo
Computer (RGB ANALOG)YesYesYesNoNo
ComponentYesYesYesYes*Yes*
Video, S-VideoYesYesYesYesYes
Yes=Adjustable, No=Not adjustable, Yes* = depending on the signal