NEC Np510w Projector User Manual
Here you can view all the pages of manual NEC Np510w Projector User Manual. The NEC manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 41
![Page 41
3. Projecting an Image (Basic Operation)
7 Turning off the Projector
To turn off the projector:
SELECT
MENU
EXITENTER
STATUSLAMP
AUTO ADJ.SOURCEENTEREXIT
MENU
UPMAGNIFYPAGE
OFFPOWERON
PIC-MUTE
DOWN
1. First, press the (POWER) button on the projector
cabinet or the POWER OFF button on the remote con-
trol. The [POWER OFF / ARE YOU SURE?] message will
appear.
2. Secondly, press the ENTER button or press the
(POWER) or the POWER OFF button again.
The power indicator will...](http://img.usermanuals.tech/thumb/54/92729/w300_nec-np510w-manual_d-40.png "Page 41
3. Projecting an Image (Basic Operation)
7 Turning off the Projector
To turn off the projector:
SELECT
MENU
EXITENTER
STATUSLAMP
AUTO ADJ.SOURCEENTEREXIT
MENU
UPMAGNIFYPAGE
OFFPOWERON
PIC-MUTE
DOWN
1. First, press the (POWER) button on the projector
cabinet or the POWER OFF button on the remote con-
trol. The [POWER OFF / ARE YOU SURE?] message will
appear.
2. Secondly, press the ENTER button or press the
(POWER) or the POWER OFF button again.
The power indicator will...")
3. Projecting an Image (Basic Operation) 7 Turning off the Projector To turn off the projector: SELECT MENU EXITENTER STATUSLAMP AUTO ADJ.SOURCEENTEREXIT MENU UPMAGNIFYPAGE OFFPOWERON PIC-MUTE DOWN 1. First, press the (POWER) button on the projector cabinet or the POWER OFF button on the remote con- trol. The [POWER OFF / ARE YOU SURE?] message will appear. 2. Secondly, press the ENTER button or press the (POWER) or the POWER OFF button again. The power indicator will...
Page 42
3. Projecting an Image (Basic Operation) After Use Preparaton: Make sure that the projector s turned off. 1. Unplug the power cable. 2. Disconnect any other cables. 3. Retract adjustable tilt foot if extended. 4. Cover the lens with the lens cap. 5. Put the projector and accessories in the supplied soft case. Place the projector in the soft case with the lens facing upward as shown below. This is to prevent the lens from damage. NOTE: When placing the projector in the soft...
Page 43
![Page 43
4
1 Turning off the Image and Sound
Press the PIC-MUTE button to turn off the image and sound for a short
period of time. Press again to restore the image and sound.
NOTE:
•
Even though the image is turned off, the menu still remains on the scree\
n.
• Sound from the AUDIO OUT jack (Stereo mini) can be turned off.
Freezing a Picture
Press the FREEZE button to freeze a picture. Press again to resume
motion.
NOTE: The image is frozen but the original video is still playing back.
...](http://img.usermanuals.tech/thumb/54/92729/w300_nec-np510w-manual_d-42.png "Page 43
4
1 Turning off the Image and Sound
Press the PIC-MUTE button to turn off the image and sound for a short
period of time. Press again to restore the image and sound.
NOTE:
•
Even though the image is turned off, the menu still remains on the scree\
n.
• Sound from the AUDIO OUT jack (Stereo mini) can be turned off.
Freezing a Picture
Press the FREEZE button to freeze a picture. Press again to resume
motion.
NOTE: The image is frozen but the original video is still playing back.
...")
4 1 Turning off the Image and Sound Press the PIC-MUTE button to turn off the image and sound for a short period of time. Press again to restore the image and sound. NOTE: • Even though the image is turned off, the menu still remains on the scree\ n. • Sound from the AUDIO OUT jack (Stereo mini) can be turned off. Freezing a Picture Press the FREEZE button to freeze a picture. Press again to resume motion. NOTE: The image is frozen but the original video is still playing back. ...
Page 44
![Page 44
5
4. Convenient Features
Changing Lamp Mode
This feature enables you to select two brightness modes of the lamp:
Normal and Eco modes. The lamp life can be extended by using the Eco mode.
To change to the [ECO] mode, do the following:
1. Press the LAMP MODE button on the remote control to display [LAMP MODE] screen.
2. Use the SELECT
or button to select [ECO] mode.
3. Press the ENTER button.
To change from [ECO] to [NORMAL], Go back to Step 2 and select [NORMAL]. Repeat Step 3.
NOTE:
•...](http://img.usermanuals.tech/thumb/54/92729/w300_nec-np510w-manual_d-43.png "Page 44
5
4. Convenient Features
Changing Lamp Mode
This feature enables you to select two brightness modes of the lamp:
Normal and Eco modes. The lamp life can be extended by using the Eco mode.
To change to the [ECO] mode, do the following:
1. Press the LAMP MODE button on the remote control to display [LAMP MODE] screen.
2. Use the SELECT
or button to select [ECO] mode.
3. Press the ENTER button.
To change from [ECO] to [NORMAL], Go back to Step 2 and select [NORMAL]. Repeat Step 3.
NOTE:
•...")
5 4. Convenient Features Changing Lamp Mode This feature enables you to select two brightness modes of the lamp: Normal and Eco modes. The lamp life can be extended by using the Eco mode. To change to the [ECO] mode, do the following: 1. Press the LAMP MODE button on the remote control to display [LAMP MODE] screen. 2. Use the SELECT or button to select [ECO] mode. 3. Press the ENTER button. To change from [ECO] to [NORMAL], Go back to Step 2 and select [NORMAL]. Repeat Step 3. NOTE: •...
Page 45
![Page 45
6
4. Convenient Features
Preventing the Unauthorized Use of the Projector [SECURITY]
A keyword can be set for your projector using the Menu to avoid operation by an unauthorized user. When a keyword
is set, turning on the projector will display the Keyword input screen. Unless the correct keyword is entered, the pro-
jector cannot project an image.
• The [SECURITY] setting cannot be cancelled by using the [RESET] of the menu.
To enable the Securty functon:
1. Press the MENU button....](http://img.usermanuals.tech/thumb/54/92729/w300_nec-np510w-manual_d-44.png "Page 45
6
4. Convenient Features
Preventing the Unauthorized Use of the Projector [SECURITY]
A keyword can be set for your projector using the Menu to avoid operation by an unauthorized user. When a keyword
is set, turning on the projector will display the Keyword input screen. Unless the correct keyword is entered, the pro-
jector cannot project an image.
• The [SECURITY] setting cannot be cancelled by using the [RESET] of the menu.
To enable the Securty functon:
1. Press the MENU button....")
6 4. Convenient Features Preventing the Unauthorized Use of the Projector [SECURITY] A keyword can be set for your projector using the Menu to avoid operation by an unauthorized user. When a keyword is set, turning on the projector will display the Keyword input screen. Unless the correct keyword is entered, the pro- jector cannot project an image. • The [SECURITY] setting cannot be cancelled by using the [RESET] of the menu. To enable the Securty functon: 1. Press the MENU button....
Page 46
![Page 46
7
4. Convenient Features
7. Type in the same combination of SELECT buttons and press the ENTER button.
The confirmation screen will be displayed.
8. Select [YES] and press the ENTER button.
The SECURITY function has been enabled.
To turn on the projector when [SECURITY] s enabled:
When the SECURITY function is enabled and the projector is turned on, the projector will display a blue back
-
ground.
To display an image at this time, press the MENU button to...](http://img.usermanuals.tech/thumb/54/92729/w300_nec-np510w-manual_d-45.png "Page 46
7
4. Convenient Features
7. Type in the same combination of SELECT buttons and press the ENTER button.
The confirmation screen will be displayed.
8. Select [YES] and press the ENTER button.
The SECURITY function has been enabled.
To turn on the projector when [SECURITY] s enabled:
When the SECURITY function is enabled and the projector is turned on, the projector will display a blue back
-
ground.
To display an image at this time, press the MENU button to...")
7 4. Convenient Features 7. Type in the same combination of SELECT buttons and press the ENTER button. The confirmation screen will be displayed. 8. Select [YES] and press the ENTER button. The SECURITY function has been enabled. To turn on the projector when [SECURITY] s enabled: When the SECURITY function is enabled and the projector is turned on, the projector will display a blue back - ground. To display an image at this time, press the MENU button to...
Page 47
![Page 47
8
4. Convenient Features
To dsable the SECURITY functon:
1. Press the MENU button.
The menu will be displayed.
2. Select [SETUP]
→ [INSTALLATION] → [SECURITY] and press the ENTER button.
The OFF/ON menu will be displayed.
3. Select [OFF] and press the ENTER button.
The KEYWORD CONFIRMATION screen will be displayed.
4. Type in your keyword and press the ENTER button.
When the correct keyword is entered, the SECURITY function will be disabled.
NOTE: If you forget your keyword,...](http://img.usermanuals.tech/thumb/54/92729/w300_nec-np510w-manual_d-46.png "Page 47
8
4. Convenient Features
To dsable the SECURITY functon:
1. Press the MENU button.
The menu will be displayed.
2. Select [SETUP]
→ [INSTALLATION] → [SECURITY] and press the ENTER button.
The OFF/ON menu will be displayed.
3. Select [OFF] and press the ENTER button.
The KEYWORD CONFIRMATION screen will be displayed.
4. Type in your keyword and press the ENTER button.
When the correct keyword is entered, the SECURITY function will be disabled.
NOTE: If you forget your keyword,...")
8 4. Convenient Features To dsable the SECURITY functon: 1. Press the MENU button. The menu will be displayed. 2. Select [SETUP] → [INSTALLATION] → [SECURITY] and press the ENTER button. The OFF/ON menu will be displayed. 3. Select [OFF] and press the ENTER button. The KEYWORD CONFIRMATION screen will be displayed. 4. Type in your keyword and press the ENTER button. When the correct keyword is entered, the SECURITY function will be disabled. NOTE: If you forget your keyword,...
Page 48
9 4. Convenient Features 30 30 Using the Optional Remote Mouse Receiver (NP01MR) The optional remote mouse receiver enables you to operate your computer’s mouse functions from the remote control. It is a great convenience for clicking through your computer-generated presentations. Connectng the remote mouse recever to your computer If you wish to use the remote mouse function, connect the mouse receiver and computer. The mouse receiver can be connected directly to the computer’s USB...
Page 49
40 4. Convenient Features Operatng your computer’s mouse from the remote control You can operate your computer’s mouse from the remote control.PAGE UP/DOWN Button: scrolls the viewing area of the window or to move to the previous or next slide in Power - Point on your computer. SELECT Buttons: moves the mouse cursor on your computer. MOUSE L-CLICK Button: works as the mouse left button. MOUSE R-CLICK Button: works as the mouse right button. NOTE: • When you operate the computer using the...
Page 50
41 4. Convenient Features 7 Network Setting by Using an HTTP Browser Overview Connecting the projector to a network allows the Alert Mail setting (→ page 43) and the projector control from a computer via the network. To perform the projector control from a web browser, you must have an exclusive application installed on your com- puter. The IP address and subnet mask of the projector can be set on the Network Setting screen of the web browser by using an HTTP server function. Please...