NEC Np200 Portable Projector Users Manual

							35... English
Appendices
Specifications
Projection System Single Chip DLPTM Technology by Texas Instruments
Number of Pixels* NP100: 800 pixels(H) X 600 lines(V), up to SXGA (1280 X 1024) with scaling 
technology
NP200: 1024 pixels(H) X 768 lines(V), up to SXGA+(1400 X 1050) with scaling 
technology
Displayable Color 16.7M colors
Lamp 180W (150W on ECO mode)
Light Output  NP200: 2100 lumens (approx. 80% in ECO mode)
NP100: 2000 lumens (approx. 80% in ECO mode)
Contrast Ratio
(full white:full black)  NP200: 1300:1
NP100: 1200:1
Projection Lens F/2.41~2.55 f=21.83~24mm with 1.1x Manual zoom lens
Projection Screen Size 
(Diag.) 27.5 to 302.8 inches (0.69 to 7.69 meters) Diagonal
Projection Distance 3.9 to 39.4 feet (1.2 to12.0 meters)
Video Compatibility -  NTSC-M/NTSC-4.43/PAL-M/PAL-B, D, G, H, I/PAL-N/SECAM
-   Component: SDTV(480i/576i), EDTV(480p, 576p), HDTV(720p, 1080i)
H. Frequency NP100:31.35kHz~68.7kHz horizontal scan
NP200:31.35kHz~80kHz horizontal scan
V. Frequency 56Hz~85Hz vertical refresh
Power Supply Universal AC input 100-240V ; Input Frequency 50-60Hz
Power Consumption Normal mode:228W
ECO mode:190W
Standby mode 
						

							36
English ...
Appendices
Compatibility Modes
Modes ResolutionV.Frequency
(Hz)  H.Frequency
(kHz) 
VGA 640 x 480 6031.50
640 x 480 7237.90
640 x 480 7537.50
640 x 480 8543.30
720 x 400 7031.50
720 x 400 8537.90
SVGA 800 x 600 5635.20
800 x 600 6037.90
800 x 600 7248.10
800 x 600 7546.90
800 x 600 8553.70
XGA 1024 x 768 6048.40
1024 x 768 7056.50
1024 x 768 7560.00
1024 x 768 8568.70
SXGA 1152 x 864 7063.80
1152 x 864 8577.10
* 1152 x 864 7567.50
1280 x 1024 6063.98
* 1280 x 1024 7276.97
* 1280 x 1024 7579.98
SXGA+ * 1400 x 1050 6063.98
Power Mac G4 640 x 48066.6 (67)34.93
800 x 600 6037.90
1024 x 768 6048.40
1152 x 870 7568.68
* 1280 x 960 7575.00
PowerBook G4 640 x 4806031.35
640 x 480 66.6 (67)34.93
800 x 600 6037.90
1024 x 768 6048.40
1152 x 870 7568.68
* 1280 x 960 7575.00
i Mac DV 1024 x 768 7560.00
1152 x 870 7568.49
Note: “*” for XGA 
model only.
Note: Shaded signals 
are compressed with 
scaling technology.
Note: The projector 
only support a separate 
sync signal. Composite 
sync and sync on green 
are not supported. 
						

							37... English
Appendices
Cabinet Dimensions
10.7/272mm
3.4/86mm
1.7/42mm
7.8/199mm
3.2/80mm
8.1/206mm
Lens Center 
						

							Power
   No power (POWER indicator does not light blue).
      Power cable’s plug is fully inserted into the wall outlet.
      Lamp cover is installed correctly.
      Lamp Hours Used (lamp operation hours) was cleared after 
lamp replacement.
      No power even though you press and hold the POWER 
button for a minimum of 1 second.    
Shut down during operation.
      Power cable’s plug is fully inserted into the wall outlet.
      Lamp cover is installed correctly .
      Power Management is turned off (only models with the 
Power Management function).
Video and Audio
    No image is displayed from your PC or video equipment to the 
projector.
      Still no image even though you connect the projector to the 
PC first, then start the PC.
      Enabling your notebook PC’s signal output to the projector.
    •   A combination of function keys will enable/disable the 
external display. Usually, the combination of the “Fn” key 
along with one of the 12 function keys turns the external 
display on or off.
      No image (blue background).
      Still no image even though you press the AUTO ADJUST 
button.
      Still no image even though you carry out [RESET] in the 
projector’s menu.
      Signal cable’s plug is fully inserted into the input connector 
A message appears on the screen.
    ( _____________________________________________ )
      The source connected to the projector is active and avail -
able.
      Still no image even though you adjust the brightness and/or 
the contrast.
      Input source’s resolution and frequency are supported by 
the projector.
    Image is too dark.
      Remains unchanged even though you adjust the brightness 
and/or the contrast.
    Image is distorted.
      Image appears to be trapezoidal (unchanged even though
      you carry out the [KEYSTONE] adjustment).    
Parts of the image are lost.
      Still unchanged even though you press the AUTO ADJUST 
button.
      Still unchanged even though you carry out [RESET] in the 
projector’s menu.
    Image is shifted in the vertical or horizontal direction.
      Horizontal and vertical positions are correctly adjusted on a 
computer signal.
      Input source’s resolution and frequency are supported by 
the projector.
      Some pixels are lost.
    Image is flickering.
      Still unchanged even though you press the AUTO ADJUST 
button.
      Still unchanged even though you carry out [RESET] in the 
projector’s menu.
      Image shows flickering or color drift on a computer signal.
    Image appears blurry or out of focus.
      Still unchanged even though you checked the signal’s reso-
lution on PC and changed it to projector’s native resolution.
      Still unchanged even though you adjusted the focus.
    No sound.
      Audio cable is correctly connected to the audio input of the 
projector.
      Still unchanged even though you adjusted the volume level.
Other
    Remote control does not work.
      No obstacles between the sensor of the projector and the 
remote control.
      Projector is placed near a fluorescent light that can disturb 
the infrared remote controls.
      Batteries are new and are not reversed in installation
Troubleshooting Check List
Before contacting your dealer or service personnel, check the following list to be sure repairs are needed also by
referring to the “Troubleshooting” section in your user’s manual. This checklist below will help us solve your problem
more efficiently.
* Print the following pages.
Frequency of occurrence  always    sometimes (How often?_______________________)     other (__________________) 
						

							In the space below please describe your problem in detail.
Information on application and environment where your projector is used
ProjectorModel number:
Serial No.:
Date of purchase:
Lamp operating time (hours):
Lamp Mode: 
 Normal   Eco
Information on input signal: Horizontal synch frequency  [ ] kHz
Vertical synch frequency  [ ] Hz
Synch polarity  H  
 (+)   (–)
  V  
 (+)   (–)
Synch type 
 Separate   Composite
 
 Sync on Green
STATUS Indicator: Steady light 
 Orange   Blue
Flashing light  [ ] cycles
Remote control model number:
Installation environment
Screen size:   inch
Screen type: 
 White matte   Beads   Polarization
  
 Wide angle   High contrast
Throw distance:  feet/inch/m
Orientation: 
 Ceiling mount   Desktop
Power outlet connection:
   Connected directly to wall outlet
  Connected to power cord extender or other (the number 
of connected equipment______________)
  Connected to a power cord reel or other (the number of 
connected equipment______________)
Computer
Manufacturer:
Model number:
Notebook PC 
 / Desktop  
Native resolution:
Refresh rate:
Video adapter:
Other:
Video equipment
VCR, DVD player, Video camera, Video game or other
Manufacturer:
Model number:Signal cableNEC standard or other manufacturer’s cable? Model number:   Length:  inch/m
Distribution amplifier Model number:
Switcher Model number:
Adapter Model number:
Projector
PC
DVD Player 
						

							 TravelCare Guide
TravelCare - a service for international travelersThis  product  is  eligible  for  “TravelCare”,  NEC’s  unique  international 
warranty.
Please  note  that  TravelCare  coverage  differs  in  part  from  coverage 
under the warranty included with the product.
Services offered with TravelCareThis  warranty  allows  customers  to  receive  service  on  their  product  at 
the  NEC  and  NEC-designated  service  stations  in  the  countries  listed 
herein  when  temporarily  traveling  internationally  for  business  or  plea-
sure.
For details on services offered by the different service stations, please 
refer to the “List of TravelCare Outlets” below.
1 Repair services The product will be repaired and delivered within 10 business days, 
not including shipping time.
During  the  term  of  warranty,  the  cost  of  maintenance  parts,  labor 
costs for repairs and shipping costs within the service station’s cov -
erage area are covered by the warranty.
2 Replacement product rental service If  the  customer  desires,  he  or  she  can  rent  a  replacement  product 
while the original product is being repaired.
Fee: US$200 for 12 days
This  fee  must  be  paid  at  the  local  service  station  in  cash  or  credit 
card. 
The US$200 rental fee is non-refundable even if the customer rents 
it less than 12 days before returning.
The replacement product will be delivered within 3 business days.
If  the  customer  did  not  return  the  replacement  product  within  12 
days, the customer will be charged the price of the unit.
If  the  customer  returned  the  replacement  product  in  a  faulty  or 
damaged condition, the repair cost will be charged to the customer.
Note  that  this  service  is  not  offered  in  all  countries  and  regions. 
Please refer to the “List of TravelCare Outlets”.
In  addition,  this  replacement  product  rental  service  is  not  offered 
after the product’s warranty has expired.
Term of warranty1
a.  Upon  presentation  of  the  warranty  or  receipt  received  upon 
purchase:
  Valid for the term indicated on the warranty or the normal term 
of warranty for the country of purchase.
b.   When only the product is brought in:
  Valid  for  a  period  of  within  14  months  of  the  date  of  manufac -
ture indicated by the serial number attached to the product.
2  When a product whose term of warranty is expired is brought in:
  Repairs  will  be  offered  for  a  fee.  In  this  case  the  customer  is  not 
eligible for the replacement product rental service.
3  In the following cases, repairs may be charged, even if the product’
s warranty is still in effect:
1) I f  the  term  of  warranty,  model  name,  serial  number  and  name 
of  the  store  of  purchase  are  not  indicated  on  the  warranty  or 
have been altered.
2)  Problems  or  damage  caused  by  dropping  or  shocks  during 
shipment  or  movement  by  the  customer  or  by  improper  han-
dling by the customers.
3)  Problems or damage caused by improper usage or unwarrant -
able alterations or repairs by the customer.
4)  Problems  or  damage  caused  by  re,  salt  damage,  gas  dam -
age, earthquakes, lightning damage, storm or ood damage or 
other  natural  disasters  or  such  external  factors  as  dust,  ciga -
rette smoke, abnormal voltage, etc.
5)  Problems or damage caused by use in hot or humid places, in 
vehicles, boats or ships, etc.
6)  Problems  or  damage  caused  by  expendable  supplies  or  de -
vices connected to the product other than those designated by 
NEC.
7)  Problems  caused  by  natural  consumption,  wear  or  deteriora -
tion of parts under normal usage conditions.
8)  Problems or damage to lamps and other expendable supplies, 
included parts or optional parts.
9)  Other  conditions  stipulated  in  the  warranty  included  with  the 
product also apply.
NOTE:  The  product  can  be  used  overseas  with  voltages  of  100  to  120V  and 
200 to 240V by using a power cable suited for the standards and power so\
urce 
voltage of the country in which the product is being used.
List of TravelCare OutletsThis list applies as of October 1, 2007.
For  the  most  up-to-date  information,  please  refer  to  the  websites  of 
the  service  stations  in  the  various  countries  on  the  List  of TravelCare 
Outlets or to the NEC website at http://www.nec-pj.com.
In Europe
NEC Europe, Ltd. / European Technical Centre Address:  Unit G, Stafford Park 12, Telford TF3 3BJ, U.K.
Telephone:  +44 1952 237000
Fax Line:   +44 1952 237006
Email Address:  [email protected]
WEB Address:  http://www.neceur.com
(Regions Covered)
EU:  
Austria*, Belgium*, Denmark*, Finland*, France*, Germany*,  Greece*, Ireland*, Italy*, Luxembourg*, The Netherlands*,
  Portugal*, Spain*, Sweden* and the United Kingdom*
EEA:  Norway*, Iceland and Liechtenstein
In North America
NEC Display Solutions of America, Inc. Address:  500 Park Boulevard, Suite 1100 
   Itasca, Illinois 60143, U.S.A.
Telephone:  +1 800 836 0655
Fax Line:   +1 800 356 2415
Email Address:  [email protected]
WEB Address:  http://www.necdisplay.com/
(Regions Covered)
U.S.A. *, Canada*
In Oceania
NEC Australia Pty., Ltd. Address:New South Wales; 184 Milperra Road, Reversby NSW 2212
Telephone: +61 2 9780 8688   Fax Line: +61 2 9780 8659
Victoria; Unit 1/6 Garden Road, Clayton VIC 3168
Telephone: +61 3 8562 6245   Fax Line: +61 3 8562 6220
Newcastle; 120 Parry Street Newcastle West NSW 2300
Telephone: +61 2 4926 2466
Queensland; Unit 4/305 Montague Road West End QLD 4101
Telephone: +61 7 3840 5858   Fax Line: +61 7 3840 5866
Goldcoast QLD; Shop1 48 Ferry Road Southport QLD 4215
Telephone: +61 7 5591 3670
South Australia; 84A Richmond Road, Keswick SA 5035
Telephone: +61 8 8375 5707   Fax Line: +61 8 8375 5757
Western Australia; 45 Sarich Court Osborne Park WA 6017
Telephone: +61 8 9445 5901   Fax Line: +61 8 9445 5999 
						

							Hyosung ITX Co., Ltd.Address:   2nd Fl., Ire B/D. #2, 4Ga, Yangpyeng-Dong,
  Youngdeungpo-Gu, Seoul, Korea 150-967
Telephone:   +82 2 2163 4193
Fax Line:   +82 2 2163 4196
Email Address:   [email protected]
(Regions Covered)
South Korea
Lenso Communication Co., Ltd. Address:  
292 Lenso House 4, 1st Floor, Srinakarin Road,    Huamark, Bangkapi, Bangkok 10240, Thailand
Telephone:  +66 2 375 2425
Fax Line:   +66 2 375 2434
Email Address:  [email protected]
WEB Address:  http://www.lenso.com
(Regions Covered)
Thailand
ABBA Electronics L.L.C. Address:  Tariq Bin Ziyad Road, P.O.Box 327, Dubai,
   United Arab Emirates
Telephone:  +971 4 371800
Fax Line:   +971 4 364283
Email Address:  [email protected]
(Regions Covered)
United Arab Emirates
Samir Photographic Supplies Address:  P.O.Box 599, Jeddah 21421, Saudi Arabia
Telephone:  +966 2 6828219
Fax Line:   +966 2 6830820
Email Address:  [email protected]
Riyadh Address:  P.O.Box 5519, Riyadh 11432, Saudi Arabia
Telephone:  +966 1 4645064
Fax Line:   +966 1 4657912
Email Address:  [email protected]
Alkhobar Address:  P.O.Box 238, Alkhobar 31952, Saudi Arabia
Telephone:  +966 3 8942674
Fax Line:   +966 3 8948162
Email Address:  [email protected]
(Regions Covered)
Saudi Arabia
NOTE:  In countries designated with an asterisk(*), replacement product rental 
service are offered.
WEB Address: http://www.nec.com.au
(Regions Covered)
Australia*, New Zealand
In Asia and Middle East
NEC Display Solutions, Ltd. Address:   686-1, Nishioi, Oi-Machi, Ashigarakami-Gun,
  Kanagawa 258-0017, Japan
Telephone:  +81 465 85 2369
Fax Line:   +81 465 85 2393
Email Address:  [email protected]
WEB Address:  http://www.nec-pj.com
(Regions Covered)
Japan*
NEC Solutions (China) Co.,Ltd. Address:   Rm 1903, Shining Building, 35 Xueyuan Rd,
  Haidian District Beijing 100083, P.R.C.
Telephone:  +8610 82317788
Fax Line:   +8610 82331722
Email Address:  [email protected]
  [email protected]
WEB Address:  http://www.necsl.com.cn
(Regions Covered)
China
NEC Hong Kong Ltd. Address:  
25/F.,The Metropolis Tower, 10 Metropolis Drive,   Hunghom, Kowloon, Hong Kong
Telephone:  +852 2369 0335
Fax Line:   +852 2795 6618
Email Address:  [email protected]
  [email protected]
WEB Address:  http://www.nec.com.hk
(Regions Covered)
Hong Kong
NEC Taiwan Ltd. Address:  
7F, No.167, SEC.2, Nan King East Road, Taipei,   Taiwan, R.O.C.
Telephone:  +886 2 8500 1714
Fax Line:   +886 2 8500 1420
Email Address:  [email protected]
WEB Address:  http://www.nec.com.tw
(Regions Covered)
Taiwan
NEC Asia Pte.Ltd. Address:  401 Commonwealth Drive, #07-02, Haw Par 
   Technocentre, Singapore 149598
Telephone:  +65 6 273 8333
Fax Line:   +65 6 274 2226
Email Address:  [email protected]
WEB Address:  http://www.nec.com.sg/ap
(Regions Covered)
Singapore
NEC Systems Integration Malaysia Sdn Bhd  Address:  
Ground Floor, Menara TA One, 22, Jalan P. Ramlee,   50250 Kuala Lumpur, Malaysia
Telephone:  +6 03 2178 3600 (ISDN)
Fax Line:   +6 03 2178 3789
Email Address:  [email protected]
WEB Address:  http://www.necarecenter.com
(Regions Covered)
Malaysia 
						

							TO: NEC or NEC’s Authorized Service Station:  
FM: 
 (Company & Name with signature) 
Dear Sir (s), 
I  would  like  to  apply  your TravelCare  Service  Program  based  on  attached  registration  and  qualication  sheet  and  agree  with 
your  following  conditions,  and  also  the  Service  fee  will  be  charged  to  my  credit  card  account,  if  I  don’t  return  the  Loan  units 
within the specied period. I also conrm following information is correct.     Regards.
 
Application Sheet for TravelCare Service Program
P-1/    , 
Country, 
product purchased :
User’s Company Name :
User’s Company Address : 
Phone No., Fax No. :
User’s Name :
User’s Address :
Phone No., Fax No. :
Local Contact ofce :
Local Contact ofce Address :
Phone No., Fax No. :
User’s Model Name :
Date of Purchase :
Serial No. on cabinet :
Problem of units per User :
Required Service :  (1) Repair and Return  (2) Loan unit 
Requested period of Loan unit :
Payment method :  (1) Credit Card   (2) Travelers Cheque  (3) Cash
In Case of Credit Card : 
Card No. w/Valid Date :
Date:      /       /       , 
						

							5. Loan Service Charges and Conditions:
Upon  acceptance  of  this  NEC  Projector,  Customer  agrees  to  assume 
liability for this loan unit.
The current cost of use of this loan unit is $200.00 USD for 12 calen-
dar days.
If Customer does not return the unit within the 12 calendar days, Cus -
tomer will be charged the next highest cost up to and including the full 
list  price  to  Credit  Cards,  which  price  will  be  informed  by  NEC  Autho -
rized  Service  Stations.  Please  see  the  attached  listing  of  contacts  for 
each country to arrange for pickup of the loan unit.
 
If  you  return  to  their  country  of  origin  with  the  loan  unit,  you  will  be 
charged additional freight to return the unit to the loaning country.
Thank you for your understanding of this program.Condition of your TravelCare Service ProgramEnduser  is  requested  to  understand  following  condition  of TravelCare 
Service  Program  and  complete  the  necessary  information  on  the  ap -
plication sheet.
1. Service Options:
There  are  3  types  of  “Service”  available.  Enduser  has  to  understand 
following condition and is required to ll in the Application Sheet. 
1)  Repair and Return:
  The ’Faulty unit’ is sent or collected from the customer. It is repaired 
and  returned  within  10  days  to  the  customer,  excluding  transport 
time. 
  There  may  have  a  case,  repair  and  return  can’t  be  done  by  NEC 
Authorized Service Station, because of shortage of spare parts due 
to same model is not sold in the territory.
2)  Repair  and  Return  with  Loan:  (This  service  is  limited  to  some  Ser -
vice Stations)
  This  service  is  offered  to  the  Enduser,  who  cannot  wait  until  their 
unit is repaired.
  The  customer  can  borrow  a  unit  for  $200  up  to  12  days.  Customer 
then  sends  in  inoperable  unit  to  nearest  NEC  Authorized  Service 
Station  for  service.  In  order  to  prevent  collection  problem,  Enduser 
is required to ll in Application Sheet. 
  Enduser needs to conrm the availability of the Service to NEC Au-
thorized Service Stations.
3)  Loan Only:
  For  this  service,  NEC  Authorized  Service  Station  supplies  the  cus -
tomer  with  a  loan  unit  for  US$200  up  to  12  days.  Customer  keeps 
the  inoperable  unit  and  when  customer  returns  home,  customer 
arranges to have the projector serviced in the home country.
2. Warranty Exclusions:
This program does not apply if the Projector’s serial number has been 
defaced, modied or removed. 
If, in the judgement of NEC Authorized Service Station or its agent the 
defects or failures result from any cause other than fair wear and tear 
or NEC neglect, or fault including the following without limitation:
1)  Accidents,  transpor tation,  neglect,  misuse,  abuse,  water,  dust, 
smoke or default of or by the Customer its employees or agents or 
any third party;
2)  Failure or uctuation of electrical power, electrical circuitry, air con -
ditioning,  humidity  control  or  other  environmental  conditions  such 
as use it in smoking area; 
3)  Any fault in the attachments or associated products or components 
(whether  or  not  supplied  by  NEC  or  its  agents  which  do  not  form 
part of the Product covered by this warranty);
4)  Any act of God, re, ood, war, act of violence or any similar occur -
rence;
5)  Any  attempt  by  any  person  other  than  any  person  authorized  by 
NEC to adjust, modify, repair, install or service the product.
6)  Any Cross-border charges such as, duty, insurance, tax etc.
3. Charges for Warranty Exclusions and Out of Warranty Case:
In  case  faulty  unit  is  under  warranty  exclusions  case  or  under  Out  of 
Warranty  period,  NEC  Authorized  Service  Station  will  Inform  estima -
tion of actual service cost to the Enduser with reason.
4. Dead on Arrival (DOA): 
Enduser  must  take  this  issue  up  with  their  original  supplier  in  the 
country of purchase.
NEC Authorized Service Station will repair the DOA unit as a Warranty 
repair, but will not exchange DOA unit with new units.