NEC Np110 Portable Projector Users Manual
Here you can view all the pages of manual NEC Np110 Portable Projector Users Manual. The NEC manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 61
![Page 61
52
5. Using On-Screen Menu
Setting Eco Mode [ECO MODE]
This feature turns on or off the ECO mode. The lamp life can be extended by selecting [ON]. Selecting [ON] also
decreases fan noise when compared to [OFF] mode.
ECO MODEDescriptionStatus of LAMP indicator
OFFThis is the Default setting
(100% Brightness).Off
ONSelect this mode to increase the lamp life
(approx. 90% Brightness.)Steady Green light
NOTE:
• The [LAMP LIFE REMAINING] and [LAMP HOURS USED] can be checked in [USAGE...](http://img.usermanuals.tech/thumb/54/92100/w300_nec-np110-manual_d-60.png "Page 61
52
5. Using On-Screen Menu
Setting Eco Mode [ECO MODE]
This feature turns on or off the ECO mode. The lamp life can be extended by selecting [ON]. Selecting [ON] also
decreases fan noise when compared to [OFF] mode.
ECO MODEDescriptionStatus of LAMP indicator
OFFThis is the Default setting
(100% Brightness).Off
ONSelect this mode to increase the lamp life
(approx. 90% Brightness.)Steady Green light
NOTE:
• The [LAMP LIFE REMAINING] and [LAMP HOURS USED] can be checked in [USAGE...")
52 5. Using On-Screen Menu Setting Eco Mode [ECO MODE] This feature turns on or off the ECO mode. The lamp life can be extended by selecting [ON]. Selecting [ON] also decreases fan noise when compared to [OFF] mode. ECO MODEDescriptionStatus of LAMP indicator OFFThis is the Default setting (100% Brightness).Off ONSelect this mode to increase the lamp life (approx. 90% Brightness.)Steady Green light NOTE: • The [LAMP LIFE REMAINING] and [LAMP HOURS USED] can be checked in [USAGE...
Page 62
![Page 62
53
5. Using On-Screen Menu
[MENU]
Selecting Menu Color [COLOR SELECT]
You can choose between two options for menu color: COLOR and MONOCHROME.
Turning On / Off Source Display [SOURCE DISPLAY]
This option turns on or off input name display such as COMPUTER, VIDEO, S-VIDEO and No Input to be displayed
on the top right of the screen.
Turning ON/OFF Control ID [ID DISPLAY]
ID DISPLAY ...........This option turns on or off the ID number which is displayed when the ID SET button on the remote control
is...](http://img.usermanuals.tech/thumb/54/92100/w300_nec-np110-manual_d-61.png "Page 62
53
5. Using On-Screen Menu
[MENU]
Selecting Menu Color [COLOR SELECT]
You can choose between two options for menu color: COLOR and MONOCHROME.
Turning On / Off Source Display [SOURCE DISPLAY]
This option turns on or off input name display such as COMPUTER, VIDEO, S-VIDEO and No Input to be displayed
on the top right of the screen.
Turning ON/OFF Control ID [ID DISPLAY]
ID DISPLAY ...........This option turns on or off the ID number which is displayed when the ID SET button on the remote control
is...")
53 5. Using On-Screen Menu [MENU] Selecting Menu Color [COLOR SELECT] You can choose between two options for menu color: COLOR and MONOCHROME. Turning On / Off Source Display [SOURCE DISPLAY] This option turns on or off input name display such as COMPUTER, VIDEO, S-VIDEO and No Input to be displayed on the top right of the screen. Turning ON/OFF Control ID [ID DISPLAY] ID DISPLAY ...........This option turns on or off the ID number which is displayed when the ID SET button on the remote control is...
Page 63
![Page 63
54
5. Using On-Screen Menu
Selecting Menu Display Time [DISPLAY TIME]
This option allows you to select how long the projector waits after the last touch of a button to turn off the menu. The
preset choices are [MANUAL], [AUTO 5 SEC], [AUTO 15 SEC], and [AUTO 45 SEC]. The [AUTO 45 SEC] is the fac-
tory preset.
Selecting a Color or Logo for Background [BACKGROUND]
Use this feature to display a blue/black screen or logo when no signal is available. The default background is...](http://img.usermanuals.tech/thumb/54/92100/w300_nec-np110-manual_d-62.png "Page 63
54
5. Using On-Screen Menu
Selecting Menu Display Time [DISPLAY TIME]
This option allows you to select how long the projector waits after the last touch of a button to turn off the menu. The
preset choices are [MANUAL], [AUTO 5 SEC], [AUTO 15 SEC], and [AUTO 45 SEC]. The [AUTO 45 SEC] is the fac-
tory preset.
Selecting a Color or Logo for Background [BACKGROUND]
Use this feature to display a blue/black screen or logo when no signal is available. The default background is...")
54 5. Using On-Screen Menu Selecting Menu Display Time [DISPLAY TIME] This option allows you to select how long the projector waits after the last touch of a button to turn off the menu. The preset choices are [MANUAL], [AUTO 5 SEC], [AUTO 15 SEC], and [AUTO 45 SEC]. The [AUTO 45 SEC] is the fac- tory preset. Selecting a Color or Logo for Background [BACKGROUND] Use this feature to display a blue/black screen or logo when no signal is available. The default background is...
Page 64
![Page 64
55
5. Using On-Screen Menu
[INSTALLATION]
Selecting Projector Orientation [ORIENTATION]
This reorients your image for your type of projection. The options are: desktop front projection, ceiling rear projection,
desktop rear projection, and ceiling front projection.
DESKTOP FRONTCEILING REAR
DESKTOP REARCEILING FRONT
Disabling the Cabinet Buttons [CONTROL PANEL LOCK]
This option turns on or off the CONTROL PANEL LOCK function.
NOTE:
• This CONTROL PANEL LOCK does not affect the remote control...](http://img.usermanuals.tech/thumb/54/92100/w300_nec-np110-manual_d-63.png "Page 64
55
5. Using On-Screen Menu
[INSTALLATION]
Selecting Projector Orientation [ORIENTATION]
This reorients your image for your type of projection. The options are: desktop front projection, ceiling rear projection,
desktop rear projection, and ceiling front projection.
DESKTOP FRONTCEILING REAR
DESKTOP REARCEILING FRONT
Disabling the Cabinet Buttons [CONTROL PANEL LOCK]
This option turns on or off the CONTROL PANEL LOCK function.
NOTE:
• This CONTROL PANEL LOCK does not affect the remote control...")
55 5. Using On-Screen Menu [INSTALLATION] Selecting Projector Orientation [ORIENTATION] This reorients your image for your type of projection. The options are: desktop front projection, ceiling rear projection, desktop rear projection, and ceiling front projection. DESKTOP FRONTCEILING REAR DESKTOP REARCEILING FRONT Disabling the Cabinet Buttons [CONTROL PANEL LOCK] This option turns on or off the CONTROL PANEL LOCK function. NOTE: • This CONTROL PANEL LOCK does not affect the remote control...
Page 65
![Page 65
56
5. Using On-Screen Menu
Selecting Communication Speed [COMMUNICATION SPEED]
This feature sets the baud rate of the PC Control port (D-Sub 9P). It supports data rates from 4800 to 38400 bps. The
default is 38400 bps. Select the appropriate baud rate for your equipment to be connected (depending on the equip-
ment, a lower baud rate may be recommended for long cable runs).
NOTE: Your selected communication speed will not be affected even when [RESET] is done from the menu.
Setting ID to the Projector...](http://img.usermanuals.tech/thumb/54/92100/w300_nec-np110-manual_d-64.png "Page 65
56
5. Using On-Screen Menu
Selecting Communication Speed [COMMUNICATION SPEED]
This feature sets the baud rate of the PC Control port (D-Sub 9P). It supports data rates from 4800 to 38400 bps. The
default is 38400 bps. Select the appropriate baud rate for your equipment to be connected (depending on the equip-
ment, a lower baud rate may be recommended for long cable runs).
NOTE: Your selected communication speed will not be affected even when [RESET] is done from the menu.
Setting ID to the Projector...")
56 5. Using On-Screen Menu Selecting Communication Speed [COMMUNICATION SPEED] This feature sets the baud rate of the PC Control port (D-Sub 9P). It supports data rates from 4800 to 38400 bps. The default is 38400 bps. Select the appropriate baud rate for your equipment to be connected (depending on the equip- ment, a lower baud rate may be recommended for long cable runs). NOTE: Your selected communication speed will not be affected even when [RESET] is done from the menu. Setting ID to the Projector...
Page 66
![Page 66
57
5. Using On-Screen Menu
[OPTIONS(1)]
Selecting Fan Mode [FAN MODE]
This option allows you to select three modes for fan speed: Auto mode, High speed mode, and High Altitude mode.
AUTO .....................The built-in fans automatically run at a variable speed according to the\
internal temperature.
HIGH ......................The built-in fans run at high speed.
HIGH ALTITUDE .....The built-in fans run at a high speed. Select this option when using the projector at altitudes approximately
5500...](http://img.usermanuals.tech/thumb/54/92100/w300_nec-np110-manual_d-65.png "Page 66
57
5. Using On-Screen Menu
[OPTIONS(1)]
Selecting Fan Mode [FAN MODE]
This option allows you to select three modes for fan speed: Auto mode, High speed mode, and High Altitude mode.
AUTO .....................The built-in fans automatically run at a variable speed according to the\
internal temperature.
HIGH ......................The built-in fans run at high speed.
HIGH ALTITUDE .....The built-in fans run at a high speed. Select this option when using the projector at altitudes approximately
5500...")
57 5. Using On-Screen Menu [OPTIONS(1)] Selecting Fan Mode [FAN MODE] This option allows you to select three modes for fan speed: Auto mode, High speed mode, and High Altitude mode. AUTO .....................The built-in fans automatically run at a variable speed according to the\ internal temperature. HIGH ......................The built-in fans run at high speed. HIGH ALTITUDE .....The built-in fans run at a high speed. Select this option when using the projector at altitudes approximately 5500...
Page 67
![Page 67
58
5. Using On-Screen Menu
Enabling Key Sound and Error Sound [BEEP]
This feature turns on or off the button sound or alarm when the following operations are performed.
- Displaying the main menu
- Switching sources
- Resetting data by using [RESET]
- Pressing POWER ON or POWER OFF button](http://img.usermanuals.tech/thumb/54/92100/w300_nec-np110-manual_d-66.png "Page 67
58
5. Using On-Screen Menu
Enabling Key Sound and Error Sound [BEEP]
This feature turns on or off the button sound or alarm when the following operations are performed.
- Displaying the main menu
- Switching sources
- Resetting data by using [RESET]
- Pressing POWER ON or POWER OFF button")
58 5. Using On-Screen Menu Enabling Key Sound and Error Sound [BEEP] This feature turns on or off the button sound or alarm when the following operations are performed. - Displaying the main menu - Switching sources - Resetting data by using [RESET] - Pressing POWER ON or POWER OFF button
Page 68
![Page 68
59
5. Using On-Screen Menu
[OPTIONS(2)]
Using Off Timer [OFF TIMER]
1. select your desired time between 30 minutes and 16 hours: Off , 0:30, 1:00, 2:00, 4:00, 8:00, 12:00, 16:00.
2. Press the enter button on the remote control.
3. the remaining time starts counting down.
4. the projector will turn off after the countdown is complete.
NOTE:
• To cancel the preset time, set [OFF] for the preset time or turn off the power.
• When the remaining time reaches 3 minutes before the projector is...](http://img.usermanuals.tech/thumb/54/92100/w300_nec-np110-manual_d-67.png "Page 68
59
5. Using On-Screen Menu
[OPTIONS(2)]
Using Off Timer [OFF TIMER]
1. select your desired time between 30 minutes and 16 hours: Off , 0:30, 1:00, 2:00, 4:00, 8:00, 12:00, 16:00.
2. Press the enter button on the remote control.
3. the remaining time starts counting down.
4. the projector will turn off after the countdown is complete.
NOTE:
• To cancel the preset time, set [OFF] for the preset time or turn off the power.
• When the remaining time reaches 3 minutes before the projector is...")
59 5. Using On-Screen Menu [OPTIONS(2)] Using Off Timer [OFF TIMER] 1. select your desired time between 30 minutes and 16 hours: Off , 0:30, 1:00, 2:00, 4:00, 8:00, 12:00, 16:00. 2. Press the enter button on the remote control. 3. the remaining time starts counting down. 4. the projector will turn off after the countdown is complete. NOTE: • To cancel the preset time, set [OFF] for the preset time or turn off the power. • When the remaining time reaches 3 minutes before the projector is...
Page 69
![Page 69
60
5. Using On-Screen Menu
Turning On the Projector By Applying Computer Signal [AUTO POWER ON(COMP.)]
When the projector is in Standby mode, applying a computer signal from a computer connected to the COMPUTER
IN input will power on the projector and simultaneously project the computer’s image.
This functionality eliminates the need to always use the POWER button on the remote control or the projector cabinet
to power on the projector.
NOTE:
• Disconnecting a computer signal from the computer will...](http://img.usermanuals.tech/thumb/54/92100/w300_nec-np110-manual_d-68.png "Page 69
60
5. Using On-Screen Menu
Turning On the Projector By Applying Computer Signal [AUTO POWER ON(COMP.)]
When the projector is in Standby mode, applying a computer signal from a computer connected to the COMPUTER
IN input will power on the projector and simultaneously project the computer’s image.
This functionality eliminates the need to always use the POWER button on the remote control or the projector cabinet
to power on the projector.
NOTE:
• Disconnecting a computer signal from the computer will...")
60 5. Using On-Screen Menu Turning On the Projector By Applying Computer Signal [AUTO POWER ON(COMP.)] When the projector is in Standby mode, applying a computer signal from a computer connected to the COMPUTER IN input will power on the projector and simultaneously project the computer’s image. This functionality eliminates the need to always use the POWER button on the remote control or the projector cabinet to power on the projector. NOTE: • Disconnecting a computer signal from the computer will...
Page 70
![Page 70
61
5. Using On-Screen Menu
7 Menu Descriptions & Functions [INFO.]
Displays the status of the current signal and lamp usage. This item has three pages (four pages on NP215). The
information included is as follows:
TIP: Pressing the HELP button on the remote control will show the [INFO.] menu items.
[USAGE TIME]
[LAMP LIFE REMAINING] (%)*
[LAMP HOURS USED] (H)
[TOTAL CARBON SAVINGS] (kg-CO2)
* The progress indicator shows the percentage of remaining bulb life.
The value informs you of...](http://img.usermanuals.tech/thumb/54/92100/w300_nec-np110-manual_d-69.png "Page 70
61
5. Using On-Screen Menu
7 Menu Descriptions & Functions [INFO.]
Displays the status of the current signal and lamp usage. This item has three pages (four pages on NP215). The
information included is as follows:
TIP: Pressing the HELP button on the remote control will show the [INFO.] menu items.
[USAGE TIME]
[LAMP LIFE REMAINING] (%)*
[LAMP HOURS USED] (H)
[TOTAL CARBON SAVINGS] (kg-CO2)
* The progress indicator shows the percentage of remaining bulb life.
The value informs you of...")
61 5. Using On-Screen Menu 7 Menu Descriptions & Functions [INFO.] Displays the status of the current signal and lamp usage. This item has three pages (four pages on NP215). The information included is as follows: TIP: Pressing the HELP button on the remote control will show the [INFO.] menu items. [USAGE TIME] [LAMP LIFE REMAINING] (%)* [LAMP HOURS USED] (H) [TOTAL CARBON SAVINGS] (kg-CO2) * The progress indicator shows the percentage of remaining bulb life. The value informs you of...