NEC Np1000 Lcd Projector Users Manual

1
1. Introduction

 Whats in the Box?
Make sure your box contains everything listed. If any pieces are missing, contact your dealer.
Please save the original box and packing materials if you ever need to ship your Projector.
OFF
VIDEO
S-VIDEOVIEWER
LAN COMPUTERCOM
PONENTONPOWERPOWER
LASER
3
D
 
R
E
F
O
R
M
A
U
T
O
 A
D
J
.ASPECT
HELP PICTUREP
I
C
-
M
U
T
E
L
A
M
P
 M
O
D
ER-CLICK
L-CLICK
MOUSE
FREEZE
VOLUME
MAGNIFYPAGE
SELECT3 12
U
PD
O
W
N
Lens cap
(24FT9741)Remote control
(7N900692)Batteries (AA x 2)...

2
1. Introduction
 Introduction to the Projector
This section introduces you to the NP2000/NP1000 projector and describes key features and controls.
Congratulations on Your Purchase of the Projector
The NP2000/NP1000 is a sophisticated XGA projector that produces an enhanced display. With the NP2000/NP1000
you will be able to project images up to 500 (measured diagonally). Enjoy crisp and sharp large screen display from
your PC, workstation or Macintosh computer, DVD player, VCR, satellite hookup, HDTV...

3
•Free downloadable Software Geometric Correction Tool 3.0.
Corrects the geometry of an image projected onto a cylindrical, spherical or corner screen via serial connection.
For additional information visit:
US : http://www.necvisualsystems.com
Europe : http://www.neceurope.com/
Global : http://www.nec-pj.com/
About this users manual
The fastest way to get started is to take your time and do everything right the first time. Take a few minutes now to
review the users manual. This may save you time later...

4
P
C
 
C
A
R
DL
A
M
PS
T
A
T
U
SP
O
W
E
RO
N
/
S
T
A
N
D
 
B
YS
O
U
R
C
E A
U
T
O
 A
D
J
U
S
T
3
D
 R
E
F
O
R
M
SELECT
P
C
 
C
A
R
D
L
A
M
P
S
T
A
T
U
S
P
O
W
E
RO
N
/
S
T
A
N
D
 
B
YS
O
U
R
C
E A
U
T
O
 A
D
J
U
S
T
3
D
 R
E
F
O
R
M
L
E
N
S
 
S
H
I
F
T
L
E
F
TR
I
G
H
T
DOWNU
P
PC CARDLAMPSTATUSPOWERSOURCEAUTO ADJUST3D REFORMON/STAND BY
SELECT
PC CARD
LAMP
STATUS
POWERSOURCE AUTO ADJUST 3D REFORM
ON/STAND BY
SELECT
LENS SHIFT
LEFTRIGHT
D
OWNUP
1. Introduction
 Part Names of the Projector
Controls
(→...

5
1. Introduction
Bottom
Carrying Handle
Carrying the Projector
Always carry your projector by the handle.
Ensure that the power cable and any other cables connecting to video sources are disconnected before moving the
projector.
When moving the projector or when it is not in use, cover the lens with the lens cap.
NOTE: To stand the projector on its end, do so by holding the cabinet, not by holding the carrying handle.
Doing so can cause damage to the carrying handle.
Anti-theft Screw for Lens
(→ page 11...

6
1. Introduction
To lock the carrying handle
1. Carefully place the projector on its end.
2. Pull up the carrying handle with the catch pressed down.
3. Press down the left and right locks to set the carrying handle
in place.
•To place back the carrying handle, press up the left and right locks
and pull down the carryng handle. 

7
1. Introduction
Top Features
1. POWER Button (ON / STAND BY) (→ page 24, 35)
NOTE: To turn on the projector, press and hold this button
for a minimum of two seconds. To turn off the projector,
press this button twice.
2. POWER Indicator (  ) (→ page 24, 35, 117)
3. STATUS Indicator (→ page 11 7)
4. LAMP Indicator (→ page 11 0, 117)
5. PC CARD Access Indicator (→ page 21, 22)
6. SOURCE Button7. AUTO ADJUST Button (→ page 33)
8. 3D REFORM Button (→ page 31, 41)
9. MENU Button
10. SELECT 
 / Volume...

8
1. Introduction
Terminal Panel Features
1. COMPUTER 1 IN/Component Connector (Mini D-
Sub 15 Pin) (→page 13, 15)
AUDIO IN (Stereo Mini Jack) (→page 13, 14, 16)
2. COMPUTER 2 IN/Component (R/cr, G/V, B/cb, H,
V) Connectors (BNC x 5) (→page 13)
AUDIO IN (Stereo Mini Jack) (→page 13)
3. COMPUTER 3 IN Connector (DVI-D 24 Pin) (HDCP
compatible) (→page 14)
AUDIO IN (Stereo Mini Jack) (→page 14)
4.COMPONENT IN (Y, Cb/Pb, Cr/Pr) Connectors
(RCA) (→page 17)
AUDIO L/MONO, R (RCA) (→page 17)
5. S-VIDEO IN...

9
1. Introduction
 Part Names of the Remote Control
4. LED
Flashes when any button is pressed.
5. POWER ON Button (→ page 24)
NOTE: To turn on the projector, press and hold the POWER
ON button for a minimum of two seconds.
6. POWER OFF Button (→ page 35)
NOTE: To turn off the projector, press the POWER OFF but-
ton twice.
7. COMPUTER 1 Button (→ page 26)
8. COMPUTER 2 Button (→ page 26)
9. COMPUTER 3 Button (→ page 26)
10. VIDEO Button (→ page 26)
11.S-VIDEO Button (→ page 26)
12. COMPONENT Button (→...

10
1. Introduction
Battery Installation
1Press the catch and remove
the battery cover.2Install new ones (AA). Ensure
that you have the batteries po-
larity (+/–) aligned correctly.3Slip the cover back over the bat-
teries until it snaps into place.
NOTE: Do not mix different types of
batteries or new and old batteries.
NOTE: Actual operating range may differ slightly from that shown in the drawing.
TIP: You can determine which remote sensor on the projector is enabled in wireless mode. The options are:...