NEC Np1000 Lcd Projector Users Manual

81
6. Using On-Screen Menu
Using the Wall Color Correction [Wall Color]
This function allows for quick adaptive color correction in applications where the screen material is not white.
The following nine options are available.
Setting Lamp Mode to Normal or Eco [Lamp Mode]
This feature enables you to select two brightness modes of the lamp: Normal and Eco modes. The lamp life can be
extended by using the Eco mode. Selecting Eco mode decreases fan noise compared to in Normal mode.
NOTE: If the projector...

82
6. Using On-Screen Menu
[Menu]
Selecting Menu Color [Color Select]
You can choose a color for the menu.
Turning On / Off Source Display, Message and Time [Display Select]
Source ................... This option turns on or off input name display such as Computer 1, Computer 2, Computer 3, Component,
Video, and No Input to be displayed on the top right of the screen.
Message ................ This option turns on or off messages. Even though selecting [Off], the following message will appear.
•...

83
6. Using On-Screen Menu
Setting a Password [Menu Lock] / [Logo Lock]
A password can be set for your projector to avoid operation by an unauthorized person.
When [Menu Lock] is set, changing the menu from Basic to Advanced will display the Password input screen.
When [Logo Lock] is set, doing any one of the following two operations will display the Password input screen.
•Changing the background from or to [Logo]
•Changing the logo data in a PC card or USB memory.
[Entry]
To assign your password:
NOTE:...

84
6. Using On-Screen Menu
[Security]
The Security function enables you to protect your projector so that the projector will not project a signal unless you
enter a keyword. There is also an option to lock the projector by using a registered PC card* or USB memory* as a
protect key. Once you have registered your PC card as a protect key, you are required to insert the registered PC card
into the PC card slot of the projector each time you turn on the projector. You can enable the Security function by...

85
6. Using On-Screen Menu
To register a PC card or USB memory device as a protect key.
Preparation: Insert the PC card into the PC card slot of the projector or insert the USB memory device into the USB
port (type A) of the projector.
1. Use the SELECT 
 or  button to select [Use Protect Key] and press the ENTER button.
2. Use the SELECT 

 or  button to select [Read] and press the ENTER button.
Data of the PC card will be read into the projector.
3. Use the SELECT 

 or  button to select [Register]...

86
6. Using On-Screen Menu
•The security disable mode is maintained until the main power is turned off (by setting the main power switch to
O or unplugging the power cord). In the following cases you will be asked to check the protect key or input the
keyword:
(1)When [OK] is selected at an image for which security is set and the power is turned off then back on
(2)When the main power is turned off then back on while the security function is enabled
(3)When you attempt to display an image for which...

87
6. Using On-Screen Menu
[Installation]
Selecting Projector Orientation [Orientation]
This reorients your image for your type of projection. The options are: desktop front projection, ceiling rear projection,
desktop rear projection, and ceiling front projection.
Desktop front
Ceiling rear
Desktop rear
Ceiling front
NOTE: What is PJLink?
PJLink is a standardization of protocol used for controlling projectors of different manufacturers. This standard protocol is
established by Japan Business Machine and...

88
Selecting Aspect Ratio and Position for Screen [Screen]
Screen Type ........... Select one of two options: 4:3 Screen or 16:9 Screen for the screen to be used. See also [Aspect Ratio].
(→ page 77)
Position ................. This feature allows you to adjust the vertical position of the image when 16:9 has been selected for the
screen type.
When 16:9 has been selected there is black area above and below the image.
NOTE: This option is available only when [16:9] is selected in [Screen Type].
NOTE:...

89
6. Using On-Screen Menu
[LAN Mode]
Setting LAN Mode
This feature allows you to set various setting items when the projector is used on your network.
CAUTION
•Consult with your network administrator about these settings.
•Connect a LAN cable (Eathernet cable) to the LAN port (RJ-45). (→ page 19)
•For wireless LAN connection, use the NEC optional wireless LAN card (NWL-100*).
*Last digit of the model code varies depending on which country you live in. For more information, visit our
Website.
•To use...

90
6. Using On-Screen Menu
To receive error messages or information on the remaining lamp life via e-mail:
1. On the [Mail] tab, select [Alert Mail] and press the ENTER button. A check mark will be placed.
2. Set [Senders Address], [SMTP Server Name] and [Recipients Address]. Select [OK] and press the
ENTER button.
(
→ page 95)
To execute [Easy Connection] using Image Express Utility 2.0:
The [Easy Connection] is a mode that can abbreviate the troublesome LAN settings when using the Image Ex-
press...