NEC Neax 2400 Ipx Isdn Features And Specifications

NEAX2400 IPX ISDN Features and Specifications
Page 196NDA-24311, Issue 1
S-93 SID to Terminating User - Display
Service Conditions (cont’d)
c.) Originating telephone number=46058301791234567 (17 digits)
4. When a data call comes in, the originating party’s number is displayed on the D
term when a data adapter
is being used, or on the connected terminal when a Data Module is being used.
5. When an audio or unrestricted call is received, DTE is displayed before the originating station’s number.
6. Either...

NEAX2400 IPX ISDN Features and Specifications
NDA-24311, Issue 1
Page 197
SID to Terminating User - DTE S-94
S-94  SID to Terminating User - DTE
General Description
This ISDN feature permits a DTE connected to a terminating Dterm via a data adapter to receive the originating
telephone number, sent from the ISDN network.
SID to Terminating User-DTE Connection
Operating Procedure
No manual operation is required.
Service Conditions
1. The originating telephone number is included in the incoming data...

NEAX2400 IPX ISDN Features and Specifications
Page 198NDA-24311, Issue 1
S-95 Sub-Address Addressing
S-95 Sub-Address Addressing
General Description
This ISDN feature permits an incoming call to be directed to a designated station by using called party sub-address
information.
Operating Procedure
No manual operation is required.
Service Conditions
1. If no called party sub-address is received, the call is automatically terminated to the ATTENDANT
CONSOLE [A-3]. If there is no ATTENDANT CONSOLE [A-3], it...

NEAX2400 IPX ISDN Features and Specifications
NDA-24311, Issue 1
Page 199
Sub Address - Present S-96
S-96 Sub Address - Present
General Description
This ISDN feature allows a PRIMARY RATE INTERFACE ISDN trunk to transfer the called party sub-address
information to a destination ISDN station when the call is originated via the NEAX2400 IPX. This feature requires
dialing of the called party telephone number and the called party sub-address.
Operating Procedure
The calling station dials the ISDN subscriber...

NEAX2400 IPX ISDN Features and Specifications
Page 200NDA-24311, Issue 1
T-42 Trunk Provisioning Service Selection
T-42  Trunk Provisioning Service Selection
General Description
Each channel of a PRI interface can be dedicated to a particular service. Services are designated to specific channels;
once designated, a channel can only be used for that service.
Trunk Provisioning Service Channel Selection
Operating Procedure
No manual operation is required.
Service Conditions
1. The services that can be...

NEAX2400 IPX ISDN Features and Specifications
NDA-24311, Issue 1
Page 201
Transfer Message (TRM) T-44
T-44  Transfer Message (TRM)
General Description
When a station calls another telephone that has set CALL TRANSFER - ALL CALLS - CCIS [C-50], this feature
allows the originating telephone number (SID) to be sent to the destination station via Transfer Message (TRM)
signal.
Operating Procedure
No manual operation is required. When CALL TRANSFER - ALL CALLS - CCIS [C-50] is activated, the
originating...

NEAX2400 IPX ISDN Features and Specifications
Page 202NDA-24311, Issue 1
V-18 Virtual Tie Line
V-18 Virtual Tie Line
General Description
This service feature provides Virtual Tie Line service by setting up a connection between two 2400 PBXs via the
ISDN network during a designated period of time. While Virtual Tie Line is set, one of the B-channels on the setup
connection is used as a CCIS No. 7 signal channel, and the other B-channels as CCIS No. 7 voice channels.
Operating Procedure
No manual operation...