NEC Neax 2400 Imx Isdn Features And Specifications

NEAX2400 IMX ISDN Features and Specifications
NDA-24281, Issue 1
Page 15
Call Forwarding - All Calls - Dterm - PRI C-95D
C-95D  Call Forwarding - All Calls - Dterm - PRI
General Description
This feature permits all calls from the ISDN network destined for a particular station to be routed to another station,
or to the Attendant, regardless of the busy or idle status of the called station. Activation and cancellation can be
accomplished by the user or the Attendant.
CALL FORWARDING - ALL CALLS - D
term -...

NEAX2400 IMX ISDN Features and Specifications
Page 16NDA-24281, Issue 1
C-95D Call Forwarding - All Calls - Dterm - PRI
Operating Procedure (cont’d)
To monitor CALL FORWARDING - ALL CALLS - Dterm - PRI from My-Line
1. Press the CALL FORWARDING- ALL CALLS feature key. The LCD displays:
To cancel CALL FORWARDING - ALL CALLS - Dterm - PRI from My-Line
1. Lift the handset or press the SPEAKER key; receive dial tone.
2. Press the CALL FORWARDING - ALL CALLS feature key; receive service set tone. The LED of...

NEAX2400 IMX ISDN Features and Specifications
NDA-24281, Issue 1
Page 17
Call Forwarding - All Calls - Dterm - PRI C-95D
Operating Procedure (cont’d)
To monitor CALL FORWARDING - ALL CALLS - Dterm - PRI for another multi-line appearance
1. Press the multi-line appearance. Then press the CALL FORWARDING - ALL CALLS feature key. The
LCD displays:
To cancel CALL FORWARDING - ALL CALLS - Dterm - PRI for another multi-line appearance
1. Lift the handset or press the SPEAKER key; receive dial tone.
2. Press...

NEAX2400 IMX ISDN Features and Specifications
Page 18NDA-24281, Issue 1
C-95D Call Forwarding - All Calls - Dterm - PRI
Service Conditions (cont’d)
6. A user may set CALL FORWARDING - ALL CALLS - Dterm - PRI for a multi-line appearance based on
the CLASS OF SERVICE - INDIVIDUAL [C-15] assigned to the station. Below are key sheet
assignments for stations 200 & 201. The CLASS OF SERVICE - INDIVIDUAL [C-15] for station 200 is
allowed CALL FORWARDING - ALL CALLS - D
term - PRI. However, the CLASS OF SERVICE...

NEAX2400 IMX ISDN Features and Specifications
NDA-24281, Issue 1
Page 19
Call Forwarding - Busy Line - PRI C-96
C-96   Call Forwarding - Busy Line - PRI
General Description
This feature permits a call to a busy station to be immediately forwarded to a predesignated station, or to the
ATTENDANT CONSOLE [A-3].
If a called station is in a hunt group and forwards calls to another hunt group, it can be determined through system
data whether the calling party is directed to the called parties hunt group, or to...

NEAX2400 IMX ISDN Features and Specifications
Page 20NDA-24281, Issue 1
C-96 Call Forwarding - Busy Line - PRI
Service Conditions (cont’d)
8. If all stations in the terminating STATION HUNTING - CIRCULAR [S-7], STATION HUNTING -
SECRETARIAL [S-8], and STATION HUNTING - TERMINAL [S-9] groups are busy, the forwarding
call will hear busy tone and will not return to the calling party’s hunt group.
9. When MULTIPLE CALL FORWARDING - BUSY LINE [M-24] service is activated, hunting is
performed at the last...

NEAX2400 IMX ISDN Features and Specifications
NDA-24281, Issue 1
Page 21
Call Pickup - Group - PRI C-97
C-97  Call Pickup - Group - PRI
General Description
This feature permits a user to answer ISDN network calls directed to other lines in a preset CALL PICKUP -
GROUP simply by dialing a pickup code.
Operating Procedure
To pick up an incoming ISDN call
1. Stations within the same CALL PICKUP - GROUP ring.
2. Lift the handset; receive dial tone.
3. Dial the Call Pickup code; the call is connected to the...

NEAX2400 IMX ISDN Features and Specifications
Page 22NDA-24281, Issue 1
C-97 Call Pickup - Group - PRI
Service Conditions (cont’d)
9. When a single line station is originating/holding a call, the station can activate this feature.
10. This service cannot be activated from an ATTENDANT CONSOLE [A-3].
11. The following issues of firmware are required to be equipped on the circuit cards:
Interactions
1. CALL HOLD [C-6]: To pick up a call while engaged in a two-party connection, the station can switchhook...

NEAX2400 IMX ISDN Features and Specifications
NDA-24281, Issue 1
Page 23
Call Pickup - Group - Dterm - PRI C-97D
C-97D  Call Pickup - Group - Dterm - PRI
General Description
This feature permits a user to answer any ISDN network call directed to another line in a preset CALL PICKUP -
GROUP by using a programmable line/feature key.
CALL PICKUP - GROUP - D
term - PRI may seize the dial tone from any multi-line appearance on the Dterm.
Operating Procedure
To pick up an incoming call
1. Stations within the...

NEAX2400 IMX ISDN Features and Specifications
Page 24NDA-24281, Issue 1
C-97D Call Pickup - Group - Dterm - PRI
Service Conditions (cont’d)
7. This service can only be set for stations belonging to the same tenant.
8. When a single line station is originating/holding a call, the station can activate this feature.
9. This service cannot be activated from an ATTENDANT CONSOLE [A-3].
10. A maximum of 100 stations can be assigned to each EXPANDED CALL PICKUP GROUP. There is no
limit to the number of Groups...