NEC Neax 2000 Ivs2 Isdn Features And Specifications
Have a look at the manual NEC Neax 2000 Ivs2 Isdn Features And Specifications online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
ISDN TERMINAL NEAX2000 IVS2ISDN Features and SpecificationsPage 12NDA-24273, Issue 1.0 12. In case of Point to Multipoint connection, a Single Line Telephone/Multiline Terminal must dial ISDN Multipoint station number assigned by CM1B, not the ISDN Terminal number assigned by CM10. 13. When a Multiline Terminal calls an ISDN Terminal or an ISDN Terminal calls a Multiline Terminal, a calling station number is displayed to the calling Multiline Terminal or the ISDN Terminal. In case of Point to Multipointconnection, the calling station numberdisplayed is the ISDN station number assigned by CM10. 14. Station to Station Calling between a PS station and an ISDN Terminal isavailable. 15. Only Preset Dialing can be used from an ISDN Terminal, Overlap dialing is not available. 16. For Event Based CCIS you must have 64K unrestricted digital data connections (circuit mode). The Telephone company cannot overflow these ISDN calls to analog lines.
MEGACOM® ACCESS/WATS NEAX2000 IVS2ISDN Features and Specifications NDA-24273, Issue 1.0Page 13 MEGACOM®ACCESS/WATS General Description AT&T’s MEGACOM®(WATS) network, as well as WATS from other carriers, can be used. Operating Procedure No manual operation is required. Service Conditions 1. The available WATS service is limited to Maximal Subscribed WATS Band (MSB). 2. No specific band will be indicated to the Network. NEAX2000 IVS2 PRIISDN NETWORKMEGACOM/WATS
MEGACOM® 800 SERVICE/800 WATS ULTRA WATS NEAX2000 IVS2ISDN Features and SpecificationsPage 14NDA-24273, Issue 1.0 MEGACOM®800 SERVICE/800 WATS ULTRA WATS General Description AT&T’s MEGACOM®800 (Inward WATS) network, as well as 800 WATS provided by other carriers, can be used. Operating Procedure No manual operation is required. Service Conditions 1. CM76 can be used to convert indialed digits. 2. The Dialed Number Identification Service (DNIS) must match the station numbering plan (CM20). 3. Multiple DNISs are supported. NEAX2000 IVS2 PRIISDN NETWORKMEGACOM/ 800 WATS ULTRA WATS MEGACOM 800 800 WATS ULTRA WATS
MULTIQUEST®/900 SERVICE NEAX2000 IVS2ISDN Features and Specifications NDA-24273, Issue 1.0Page 15 MULTIQUEST®/900 SERVICE General Description AT&T’s MultiQuest®service can be used. (It is a “900”-type service.) Also, 900 service provided by other carriers can be used. Operating Procedure No manual operation is required. Service Conditions 1. The Dialed Number Identification Service (DNIS) must match the numbering plan (CM20) of the NEAX2000 IVS2. 2. Multiple DNIS numbers are supported. 3. Command CM76 can be used to convert DNIS digitsreceived from the ISDN Network. PRIISDN NETWORKMultiGuest/ 900 Service NEAX2000 IVS 2
SUBADDRESS–PRESENT NEAX2000 IVS2ISDN Features and SpecificationsPage 16NDA-24273, Issue 1.0 SUBADDRESS–PRESENT General Description This feature allows a primary rate interface ISDN trunk to transfer the called party subaddress information to a destination ISDN station when the call is originated by the NEAX2000 IVS2. Dialing the called party station number and subaddress is required. Operating Procedure The callingstation dials the ISDN subscriber number (including access code) followed by an asterisk (*),then dials the called party subaddress followed by a pound sign(#). ISDNautomatically recognizes the subaddress and transfers the information to the destination party. Service Conditions 1. If the calling party fails to dial the called party subaddress, ISDN cannot transfer any called party subaddress informationtothedestinationparty. 2. If a calling party does not wish to provide a called party subaddress, the call must terminate with a pound sign (#) (Immediate Start). If a pound sign is not entered, a Timing Start operation begins. The Timing Start uses the interdigit time-out operation. 3. Subaddress dialing is available only on those telephone terminals that can generate push-button (DTMF) signals. 4. The called party subaddress must not exceed eight digits. 5. The called party subaddress can be sent with trunk direct dial access. 6. This feature may cannot be used when a call is originated to ISDN using Speed Calling or Call Forwarding features. ISDN DTI PBX 555-5000 CALLING PARTY4211 SUBADDRESS DIAL 214-555- 5000 4211
TRUNK PROVISIONING SERVICE SELECTION NEAX2000 IVS2ISDN Features and Specifications NDA-24273, Issue 1.0Page 17 TRUNK PROVISIONING SERVICE SELECTION General Description Each channel of a PRI interface can be dedicated to a particular service. Services are designated to specific channels; once designated, a channel can be used only for that service. Operating Procedure No manual operation is required. Service Conditions The services that can be designated include MEGACOM®/WATS and MEGACOM®800/800WATS. Arrangement with the carrier at the time of provisioning is needed. B-channels D-channelPRI Service A Service B
NEAX2000 IVS2ISDN Features and SpecificationsPage 18NDA-24273, Issue 1.0 This page is for your notes.
APPENDIX A: DtermFIXED FUNCTION KEYS NEAX2000 IVS2ISDN Features and Specifications NDA-24273, Issue 1.0Page 19 APPENDIX A: DtermFIXED FUNCTION KEYS Series E Series III Description Answer ANS To answer a waiting call Conf CNF To establish three-way conversation Feature FNCTo activate terminal setup functions and to program One-Touch Speed Dial/Feature Keys Hold HOLD To place an internal or external call on hold Recall LNR/SPD To terminate established call and re-seize internal dial tone Redial RECALL To active Last Number Call and Speed Calling Speaker SPKRTo control the built-in speaker which can be used for Hands Free dialing/monitoring Transfer TRFTo transfer established calls to another station, without attendant assistance
APPENDIX B: DtermLCD DISPLAYS NEAX2000 IVS2ISDN Features and SpecificationsPage 20NDA-24273, Issue 1.0 APPENDIX B: DtermLCD DISPLAYS Description Series E Series III Clock/Calendar Display 10:06 PM MON 21 APR 1999 10:06 PM TUE 14 Busy BUSY XXXX BUSY XXXX Restriction RESTRICT XXXX RST XXXX Do Not Disturb DND XXXX DND XXXX Call Forwarding - All Calls CF ALL XXXX FDA XXXX Call Forwarding - Busy Line CF BUSY XXXX FDB XXXX Call Forwarding - No Answer CF NANS XXXX FDN XXXX Call Transfer TRANSFER XXXX XFR XXXX Conference CONF XXXX XXXX CNF XXXX XXXX Non Exclusive Hold HOLD XXXX HLD XXXX Exclusive Hold E-HOLD XXXX EHD XXXX Stack DialREDIAL[*/#]/SPEED -1 82625563RDL[*/#]/SPD -1 82625563