NEC Nc2500s Projector Specifications

							DLP Cinema™ Projector
NECs NC2500S with state of the art technology, is best suited for 
large screen theaters
The worldÕsBRIGHTESTDLP Cinema™Projector*
1
NC2500S
World’s FIRST DLP Cinema Projector™ for screens up to 25M (82ft) 
*1
Precise 2K (2048 x 1080) resolution
High contrast 2000:1 images
Easy to operate!  User friendly!
   - World’s FIRST memory functions for lens position  and lamp output *1 
   - World’s  FIRST Lamp changes possible from back of projector 
*1 
   - Direct selection buttons for 8 stored titles   
   - Projector can be controlled from an optional touch screen
   - Auto lamp brightness control
   - Standard Film projector lamps can be used 
*2
   - Built-in webserver allows basic control of  the projector from any web browser
Minimal maintenance
   DMD shielding prevents dust, oil and smoke particles from settling on DMD surface 
*1 Among DLP Cinema™ Projectors, according to a survey conducted by NEC in December, 2005. 
*2 Compatible third-party film projector lamps will be listed on NECs website after verification from time to time.
Impress and Express with Big Screen Solutions from NEC
(NEC optional Pedestal)  
						

							Built-in type 
Multi Media Switcher
connect various input sources with
NC2500S through 
Multi Media Switcher 
KDLP-0512-241ZM
DLP (Digital Light Processing), DLP Cinema, CineLink, CineCanvas, CinePalette and CineBlack
are trademarks of Texas Instruments.
All other trademarks are the property of their respective owners.
Specifications are subject to change without prior notice.
*This brochure uses recycled paper.
*This brochure was printed with environment friendly vegetable soybean oil ink.
Specifications
Optional accessories
Projection method 
DMD specification  Size, Type, Resolution 
Light Output 
Supported screen sizes 
Contrast ratio 
Primary lenses 
 
 
 
Lamp bulbs 
 
 
 
 
DLP Cinema
TM functions 
Lens adjustment functions 
 
Cooling method 
 
Fan noise 
Power supply voltage*
3 
 
Rated input current 
 
Power consumption 
 
Environment     Operational temperatures
                         Storage temperatures
Regulations 
External dimensions 
 
 
 
 
 
 
 
Weight 3-chip DMD reflection method (DLP
TM method)  
1.2, 12o
tilt angle, 2048 x 1080 pixels   
23,000 ANSI Lumens*1  
15 meters (49 feet)*2 - 25 meters (82 feet)*1 wide  
2000 : 1 or above (full on / off)  
1.45 to 1.8:1 zoom  
1.8  to 2.4:1 zoom 
2.2  to 3.0:1 zoom  
3.0  to 4.3:1 zoom  
NEC High efficiency Xenon lamp bulbs  
    NEC 4.5kW lamp bulb 
    NEC 6.0kW lamp bulb 
 *
NEC recommends the use of NEC lamp bulbs in order to maximize luminance efficiency 
Standard film lamp bulbs*3 
CineLinkTM, CineCanvasTM, CinePaletteTM, CineBlackTM  
Motorized focus, zoom, horizontal/vertical shift*, light shutter(dowser)   
*
Range of motorized shift is dependent on lens  Liquid cooling system inside, Air cooling system with dust preventing electro-static filter.   
Thermal dissipation : 30539BTU  
Less than 65 dB  
Projector head : 200 to 240V AC, 50/60Hz, single phase  
Lamp power supply unit : 200 to 230V / 380 to 415V AC, 50/60Hz, 3 phases  
Projector head : 5A Max  
Lamp power supply unit : 28A Max  
Projector head : 950W  
Lamp power supply unit : 8000W  
5
oC to 35oC( 41oF to 95oF), humidity : 10% to 85% (non-condensing)  
-10oC to 50oC(14oF to 122oF), humidity : 10% to 85% (non-condensing)  
USA UL60950 FCC Class A Canada CSA60950 ICES-003 Class A
Europe EN60950 EN55022 1998, Class A EN55024-1998 EN61000-3-2 EN61000-3-3
Oceania EN60950 AS/NZS 3548 Class A 1995 + A1/2:1997
Japan J60950 VCCI Class A Asia EN60950 CISPR Pub22
Name
HDSDI port
DVI port
PC card slot
LAN port
USB port
Serial port(RS-232C)
General Purpose Input / OutputRemote control connector Type
Signal
Input 
External
control  Description
BNC
DVI-digital
For compact flash memory 
card or wireless LAN card
RJ-45
Type A
D-sub (9-pin)
D-sub (37-pin)
Stereo miniQuantity
2
2
1
2
1
1
1
1
Input / Output terminals
Remote control unit
Cable for remote control unit (16 m / 629 in.)
Lens holder    *
necessary to attach to primary lens
Users manual
Standard supplied accessories
Pedestal
Air filter for replacement
   *
This air filter should be replaced whenever a new lamp bulb is replaced.
Touch panel controller & Holder arm
Lamp house module without a lamp bulb
Anamorphic lens 1.25 &  
Automatic anamorphic lens turret
Wireless LAN card 
Multi-Media Switcher for alternative content
-Built-in type Multi-Media Switcher
  *
Video Input Board and Analogue RGB Input Board are
    included in standard built-in type Multi-Media Switcher.
    
(available in April, 2006)
-Optional Input Boards for Multi-Media Switcher
    -Single HD/SDI Input Board
     -DVI Input Board 
     -Analogue RGB Input Board
     -Video Input Board
.
Optional accessories are subject to change without notice
System configurationWhen using various image sources
NC2500S
Optional Input Boards 
DVI-D
HDSDI/SDI
ANALOGUE Video Input Board
(included)
RGB Analogue Input Board
(included) 
1$
$.&3	)%574%57
 %7%
1MBZFS%JHJUBM
7$3
	)%574%57
 $JOFNB
4FSWFS$JOF-JOL
5.








	)%4%*%7*%

Other contentDLP Cinema
™ content
503mm
19.8in
854mm
33.6in 50.5mm
2in
133mm
5.3in 985mm
38.8in 109mm
4.29in
359mm
14.1in
1213mm
47.8in 700mm
27.6in
700mm
27.6in
1100 mm
43.3in
1100 mm
43.3inDimentions
Pedestal (NEC Option)      Projector head (NC2500S)     1100 mm
43.3in
* Lamp power supply unit can be installed 
   in the Pedestal
http://www.nec-pj.com/products/dlpcinema/index.html
(Note : select according to magnifications of 
            installation environment)
(Note : select according to installation conditions)
*1  Subject to Installation conditions.  This can be achieved using NEC 6kW lamp bulb. 
*2  Subject to installation conditions.
*3  Compatible third-party film projector lamp bulbs will be listed on NECs website after verification from time to time.
*4  Power cord for Projection head : Supplied with NC2500S.
     Power cord for Lamp power supply unit : Not supplied with NC2500S.  Procurement for this cable is required by exhibitors.
Projector head : 700 (W) x 1100 (D) x 503 (H) (mm)  
                           27.6(W) x 43.3(D) x 19.8(H) (inch)  
      *
Excluding lens, lens hood and exhaust stack. Lamp power supply unit  : 596(W) x 397(D) x 471(H) (mm)   
                                          23.5(W) x 15.7(D) x 18.6(H) (inch)  
Projector head + Pedestal (NEC Option) : 700 (W) x 1100 (D) x 1357 (H) (mm)  
                                                                   27.6(W) x 43.3(D) x 53.5(H) (inch)  
      *
Excluding lens, lens hood, exhaust stack and handle. Including foot. 
Projector head : Approx.120kg / 265lb  
      *
Excluding lens. Lamp power supply unit : Approx. 50.5kg/ 112 lb   
Projector head + Pedestal(NEC Option) : Approx. 255.5kg/ 564 lb   
 *
Including Lamp power supply unit