NEC Nc1500c Projector Specifications

							DLP Cinema® Projector
Integrated-typeDLP Cinema
®
projector*
1
NC1500C
Precise 2K (2048 x 1080) resolution
High contrast 2000:1 images
Easy to operate!  User friendly!
   - Industry FIRST memory functions for lens (zoom/position/focus) and lamp power *3*4
   - Industry FIRST Lamp replacement from rear of the projector *3 
   - Direct selection buttons for 8 stored titles   
   - Projector can be controlled from an optional touch screen
   - Auto lamp brightness control
   - Standard Film projector lamps can be used 
*5
   - Built-in webserver allows basic control of  the projector from any web browser
Easy to carry
   - Industry FIRST DLP Cinema® Projectors which can be moved or delivered without removing 
     the lamp from the projectors 
*3.  Best suited for cinema application
Minimal maintenance
   DMD shielding prevents dust, oil and smoke particles from contaminating the DMD surface
 
*1 Integrated-type means projector head and lamp power supply unit are integrated in the projector.
*2 Subject to installation conditions.
*3 Among DLP Cinema
® Projectors, according to a survey conducted by NEC in February, 2006. 
*4 Various aspect ratios and corresponding brightness levels can be stored and retrieved automatically.
*5 Compatible third-party film projector lamps will be listed on NECs website after verification from time to time.
From Digital Cinema to Mobile Convenience   NEC Projector is the Best Solution
NECs NC1500C with state of the art technology is best suited 
for movie theaters with screens up to 15m (49ft)
 *1
Integrated-type DLP Cinema® Projector for screens up to 15M (49ft) 
*1*2  
						

							Built-in type 
Multi Media Switcher
connect various input sources with
NC1500C through 
Multi Media Switcher 
KDLP-0603-261ZM
DLP, DLP Cinema and their respective logos are trademarks or registered trademarks of 
Texas Instruments.
CineLink, CineCanvas, CinePalette and CineBlack are trademarks of Texas Instruments.
All other trademarks are the property of their respective owners.
Specifications are subject to change without prior notice.
*This brochure uses recycled paper.
*This brochure was printed with environment friendly vegetable soybean oil ink.
Specifications
Optional accessories
Projection method 
DMD specification  Size, Type, Resolution 
Light Output 
Supported screen sizes 
Contrast ratio 
Primary lenses 
 
 
 
Lamp bulbs 
 
 
 
DLP Cinema
® functions 
Lens adjustment functions 
 
Cooling method 
 
Fan noise 
Power supply voltage*
4 
Rated input current 
Power consumption 
Environment     Operational temperatures
                         Storage temperatures
Regulations 3-chip DMD reflection method (DLP
® method)  
1.2, 12o
tilt angle, 2048 x 1080 pixels   
11,000 ANSI Lumens*1  
8 meters (26 feet)*2 - 15 meters (49 feet)*1 wide  
2000 : 1 or above (full on / off)  
1.45 to 1.8:1 zoom  
1.8  to 2.4:1 zoom 
2.2  to 3.0:1 zoom  
3.0  to 4.3:1 zoom  
NEC High efficiency Xenon lamp bulbs
    NEC 3.0kW lamp bulb
 *
NEC recommends the use of NEC lamp bulbs in order to maximize luminance efficiencyStandard film lamp bulbs*3 
CineLinkTM, CineCanvasTM, CinePaletteTM, CineBlackTM  
Motorized focus, zoom, horizontal/vertical shift*, light shutter(dowser)   
*
Range of motorized shift is dependent on lens  Liquid cooling system inside, Air cooling system with dust preventing electro-static filter. 
Thermal dissipation:15013BTU (Input 3kW power to NEC 3.0kW lamp bulb)
Projector exhaust:424CFM (Cubic foot per minute)
Demand of exhaust:565CFM (Cubic foot per minute) 
Less than 65 dB (T.B.D.)
200 to 240V AC, 50/60Hz, single phase  
24A Max (T.B.D.)  
4400W (T.B.D.) 
5
oC to 35oC(41oF to 95oF), humidity : 10% to 85% (non-condensing)  
-10oC to 50oC(14oF to 122oF), humidity : 10% to 85% (non-condensing)  
Name
HDSDI port
DVI port
PC card slot
LAN port
USB port
Serial port(RS-232C)
General Purpose Input / OutputRemote control connector Type
Signal
Input 
External
control  Description
BNC
DVI-digital
For compact flash memory 
card or wireless LAN card
RJ-45
Type A
D-sub (9-pin)
D-sub (37-pin)
Stereo miniQuantity
2
2
1
2
1
1
1
1
Input / Output terminals
Remote control unit
Cable for remote control unit (16 m / 629 in.)
Lens holder    *
necessary to attach to primary lens
Users manual
Standard supplied accessories
Air filter for replacement
   *
This air filter should be replaced whenever a new lamp bulb is replaced.
Touch panel controller & Holder arm
Lamp house module without a lamp bulb
Anamorphic lens 1.25 &  
Automatic anamorphic lens turret
Multi-Media Switcher for alternative content
-Built-in type Multi-Media Switcher
 (available in April,2006)
  *Video Input Board and Analogue RGB Input Board are
    included in standard built-in type Multi-Media Switcher.
-Standalone type Multi-Media Switcher(available in July,2006)  *Video Input Board and Analogue RGB Input Board are included in standard 
    standalone type Multi-Media Switcher.
-Optional Input Boards for Multi-Media Switcher
    -Single HD/SDI Input Board
     -DVI Input Board 
     -Analogue RGB Input Board
     -Video Input Board
.
Pedestal for NC1500C shall not be supplied by NEC..Optional accessories are subject to change without notice.
System configurationWhen using various image sources
NC1500C
Optional Input Boards 
VIDEO (CVBS, S-VIDEO, COMPONENT VIDEO)
ANALOGUE RGB
HDSDI/SDI
DVI-D Video Input Board
(included)
RGB Analogue Input Board
(included) 

1$
$.&3	)%574%57
 %7%
1MBZFS%JHJUBM
7$3
	)%574%57
 $JOFNB
4FSWFS$JOF-JOL
5.








	)%4%*%7*%

Other contentDLP Cinema
® content
Dimensions
http://www.nec-pj.com/products/dlpcinema/index.html
(Note : select according to magnifications of 
            installation environment)
*1  Subject to Installation conditions.  This can be achieved using NEC 3kW lamp bulb. 
*2  Subject to installation conditions.
*3  Compatible third-party film projector lamp bulbs will be listed on NECs website after verification from time to time.
      NEC optional collet shall be attached to the film lamp bulb. 
*4  Power cord  : Supplied with NC1500C.
Projector : 700(W) x 1100(D) x 674(H) (mm)  (T.B.D.) 
                  27.6(W) x 43.3(D) x 26.5(H) (inch)  (T.B.D.)
      *
Excluding lens, lens hood and exhaust stack. Projector : Approx.146kg / 322lb (T.B.D.)  
      *Excluding lens. 
674mm
26.5in530mm
21in
700mm
27.6in
600mm
24in985mm
39in
1100 mm
43.3in
USA  
Canada 
Europe 
Oceania 
Japan 
AsiaUL60950-1 
CSA60950-1
EN60950-1
IEC60950-1
J60950 
IEC60950-1FCC Class A
ICES-003 Class A
EN55022 Class A
EN55024
AS/NZS CISPR.22   Class A 
VCCI Class A
CISPR.22  
External dimensions 
 
 
Weight 
* Does not include lens, lens hood and exhaust stack.