NEC Multisync X461hb Users Manual

							English-9
English
 Kensington Lock
For security and theft prevention.
 EXTERNAL SPEAKER TERMINAL
To output the audio signal from AUDIO 1, 2, 3, HDMI and
TV jack.
Note: This speaker terminal is for 15W + 15W (8 ohm)
speaker.
 Option board slot
Slot for board accessories. Please contact your supplier for
detail information.
 
						

							English-10
 POWER button
Switches the power on/standby.
 INPUT button
Selects input signal.
DVI: DVI
VGA: VGA
RGB/HV: RGB/HV
HDMI: HDMI
DVD/HD: DVD/HD1, DVD/HD2, SCART
VIDEO: VIDEO1, VIDEO2
S-VIDEO: S-VIDEO
OPTION: Depend on your connection
 PICTURE MODE button
Selects picture mode, [HIGHBRIGHT], [STANDARD],
[sRGB], [CINEMA], [AMBIENT1], [AMBIENT2]. See page 18.
HIGHBRIGHT: for moving images such as DVD.
STANDARD: for images.
sRGB: for text based images.
CINEMA: for movies.
AMBIENT1 and AMBIENT2: activate auto dimming
function. See page 18.
 ASPECT button
Selects picture aspect, [FULL], [NORMAL], [WIDE] and
[ZOOM]. See page 17.
 SOUND button
Artificial surround sound.
 KEYPAD
Press buttons to set and change passwords, change
channel and set REMOTE ID.
 ENT button*
Sets channels.
 DISPLAY button
Turns on/off the information OSD. See page 17.
 MENU button
Turns on/off the menu mode.
 AUTO SETUP button
Enters auto setup menu. See page 20.
 EXIT button
Returns to previous menu within OSD menu.
 UP/DOWN button
Acts as 
  button to move the highlighted area up or
down to select adjustment items within OSD menu.
Small screen which adjusted “PIP” mode moves up or down.
 MINUS/PLUS (+/-) button
Increases or decreases the adjustment level within OSD
menu settings.
Small screen which adjusted “PIP” mode moves left or right.
 SET button
Makes selection.
 VOLUME UP/DOWN button
Increases or decreases audio output level.
 CH +/- button*
Moves channel up or down (For U.S.).
 GUIDE button*
Enters on screen program guide (For U.S.).
 MUTE button
Turns on/off mute function.
 STILL button
ON/OFF button: Activates/deactivates still picture mode.
STILL CAPTURE button: Captures still picture.
 PIP (Picture In Picture) button
ON/OFF button: Toggle switches between PIP, POP, side-
by-side (aspect) and side-by-side (full). See page 22.
INPUT button: Selects the “picture in picture” input signal.
CHANGE button: Replaces to the main picture and sub
picture.
*: The product you purchased may not have this feature.
Wireless Remote Control
DVI VGA RGB/HV HDMI DVD/HD1 DVD/HD2 SCART VIDEO1 VIDEO2 S-VIDEODVI --VGA----RGB/HV----HDMI --DVD/HD1--DVD/HD2----SCART--- - -VIDEO1-- - -VIDEO2-------
S-VIDEO-- - -
Sub picture
Main picture
 
						

							English-11
English
Operating Range for the Remote
Control
Point the top of the remote control toward the LCD monitor’s
remote sensor during button operation.
Use the remote control within a distance of about 7 m (23 ft.)
from remote control sensor or at a horizontal and vertical
angle of within 30° within a distance of about 3.5 m (10 ft.).
Caution:Important, the remote control
system may not function when
direct sunlight or strong
illumination strikes the remote
control sensor or when there is
an object in the path.
Handling the remote control
•Do not subject to strong shock.
•Do not allow water or other liquid to splash the remote
control. If the remote control gets wet, wipe it dry
immediately.
•Avoid exposure to heat and steam.
•Other than to install the batteries, do not open the
remote control.
 REMOTE ID button
Activates REMOTE ID function.
 MTS button*
Multichannel television sound.
 AUDIO INPUT button
Selects audio input source [IN1], [IN2], [IN3], [HDMI], [TV]*.
  button*
Activates closed captioning (For U.S.).
*: The product you purchased may not have this feature.
 
						

							English-12
1. Determine the installation location
CAUTION:Installing your LCD display must be done by a
qualified technician. Contact your dealer for
more information.
CAUTION:
MOVING OR INSTALLING THE LCD MONITOR
MUST BE DONE BY TWO OR MORE PEOPLE.
Failure to follow this caution may result in injury if
the LCD monitor falls.
CAUTION:Do not mount or operate the display upside
down, face up, or face down.
CAUTION:This LCD has a temperature sensor and cooling
fan. If the LCD becomes overheated while the
cooling fan is running, a “Caution” warning will
appear. If the “Caution” warning appears,
discontinue use and allow the unit to cool.
If the LCD is used in an enclosed area or if the
LCD panel is covered with a protective screen,
please check the inside temperature of the
monitor by using the “HEAT STATUS” control in
the OSD (see page 24).
IMPORTANT:Lay the protective sheet, which was wrapped
around the LCD monitor when it was
packaged, beneath the LCD monitor so as
not to scratch the panel.
2. Install the remote control batteries
The remote control is powered by two 1.5V AA batteries.
To install or replace batteries:NEC recommends the following battery use:
•Place “AA” size batteries matching the (+) and (-) signs
on each battery to the (+) and (-) signs of the battery
compartment.
•Do not mix battery brands.
•Do not combine new and old batteries. This can shorten
battery life or cause liquid leakage of batteries.
•Remove dead batteries immediately to prevent battery
acid from leaking into the battery compartment.
•Do not touch exposed battery acid, it may injure skin.
NOTE:If you do not intend to use the Remote Control for a
long period of time, remove the batteries.
3. Connect external equipment
(See pages 14 and 15)
•To protect the external equipment; turn off the main
power before making connections.
•Refer to your equipment user manual for further
information.
4. Connect the supplied power cord
•The equipment should be installed close to an easily
accessible power outlet.
•Please fasten power cord to the LCD monitor by
attaching the screw and clamp.
•Fully insert the prongs into the power outlet socket.
A loose connection may cause image degradation.
NOTE:Please refer to the “Safety Precautions and
Maintenance” section of this manual for proper
selection of AC power cord.
Setup
A. Press and slide to open the cover.
B. Align the batteries according to the (+) and (–)
indications inside the case.
C. Replace the cover.
CAUTION:Incorrect usage of batteries can result in leaks
or bursting.
Screw
Clamp
 
						

							English-13
English
6. Switch on the power of all the attached
external equipment
When connected with a computer, switch on the power of
the computer first.
7. Operate the attached external
equipment
Display the signal from the desired input source.
8. Adjust the sound
Make volume adjustments when required.
9. Adjust the screen (See pages 20 and 21)
Make adjustments of the screen display position when
necessary.
10. Adjust the image (See page 20)
Make adjustments such as brightness or contrast when
required.
11. Recommended Adjustments
To reduce the risk of the “Image Persistence”, please adjust
the following items based on the application being used:
“SCREEN SAVER”, “SIDE BORDER COLOR” (See page 24)
“DATE & TIME”, “SCHEDULE SETTINGS” (See page 21).
5. Attach the cable cover
•Use six of the M4 x 10 screws (included) to attach the
cable cover.
 
						

							English-14
Connections
Before making connections:
*First turn off the power of all the attached equipment and make connections.
*Refer to the user manual included with each separate piece of equipment.
Wiring Diagram
Connectingterminal
DVD/HD1 (3RCA)
DVI-D
HDMI
DVD/HD+VIDEO
VIDEO1 (BNC&RCA)
S-VIDEO
VIDEO2 (5BNC)
DVD/HD2 (5BNC)
VGA
DVI-D
BNC
DVI-DSetting in Terminal Mode
-
DVI MODE: DVI-HD
RAW/EXPAND*1
SCART: ON
-
-
BNC MODE: VIDEO
BNC MODE: COMPONENT
-
DVI MODE: DVI-PC
BNC MODE: RGB
DVI MODE: DVI-PCInput signal
name
DVD/HD1
DVI
HDMI
SCART
VIDEO1
S-VIDEO
VIDEO2
DVD/HD2
VGA
DVI
RGB/HV
DVIConnecting
Audio terminal
AUDIO IN1, IN2, IN3
AUDIO IN1, IN2, IN3
HDMI
AUDIO IN1, IN2, IN3
AUDIO IN1, IN2, IN3
AUDIO IN1, IN2, IN3
AUDIO IN1, IN2, IN3
AUDIO IN1, IN2, IN3
AUDIO IN1, IN2, IN3
AUDIO IN1, IN2, IN3
AUDIO IN1, IN2, IN3
AUDIO IN1
Input buttonin remote control
DVD/HD
DVI
HDMI
DVD/HD
VIDEO
S-VIDEO
VIDEO
DVD/HD
VGA
DVI
RGB/HV
DVI
Connectedequipment
AV
PC
Media Player
•AUDIO IN 1, 2 and 3 can be used for audio input. To select audio source [IN1], [IN2] or [IN3] in AUDIO INPUT in OSD
menu or press the AUDIO INPUT button (remote control).
DVD player
with HDMI outDVD player
VCR or DVD
Player Stereo AmplifierSecond monitor
Computer (Analog) Computer (Digital)DVD player with
SCART OUT
*1: depend on signal type.
 
						

							English-15
English
Connecting a Personal Computer
Connecting your computer to your LCD monitor will enable you to display your computer’s screen image.
Some video cards and a pixel clock over 162MHz may not display an image correctly.
Your LCD monitor displays proper image by adjusting the factory preset timing signal automatically.

•If you use with a Macintosh PowerBook, set “Mirroring” to Off.
Refer to your Macintosh’s owner’s manual for more information about your computer’s video output requirements and any
special identification or configuring your monitor’s image and monitor may require.
•Input TMDS signals conforming to DVI standards.
•To maintain display quality, use a cable that conforms to DVI standards.
Connecting a DVD Player with HDMI out
•Please use an HDMI cable with HDMI logo.
•It may take a moment for the signal to appear.
•PC-DVI signals are not supported.
Horizontal Vertical
640 x 480 31.5kHz 60Hz800 x 600 37.9kHz 60Hz
1024 x 768 48.4kHz 60Hz
1280 x 768 48kHz 60Hz1360 x 768 48kHz 60Hz Recommended resolution
1280 x 1024 64kHz 60Hz Compressed image
1600 x 1200 75kHz 60Hz Compressed image
1920 x 1080 66.6kHz 60Hz Compressed image
ResolutionRemarksScanning frequency
 
						

							English-16
Basic Operation
Power ON and OFF Modes
The LCD monitor power indicator will turn green while powered on and will turn red or amber while powered off.
NOTE:The Main Power Switch must be in the ON position in order to power up the monitor using the remote control or the
Power Button on the front of the LCD.
Power ButtonMain Power Switch
ON
OFF
Using the remote control
 
						

							English-17
English
NORMAL: Displays the aspect ratio the same as it is sent
from the source.
FULL: Fills entire screen.
WIDE: Expands a 16:9 letter box signal to fill entire screen.
ZOOM (DYNAMIC): Expands a 4:3 pictures to fill the entire
screen with non-linearity. Some of the outside image area
will be cut off due to expansion.
ZOOM
The image can be expanded beyond the active display area.
The image which is outside of active display area is not
shown.
ZOOM
ZOOM
Using Power Management
The LCD monitor follows the VESA approved DPM Power
Management function.
The power management function is an energy saving
function that automatically reduces the power consumption
of the display when the keyboard or the mouse has not been
used for a fixed period.
The power management feature on your new display has
been set to the “ON” mode. This allows your display to enter
a Power Saving Mode when no signal is applied. This could
potentially increase the life and decrease the power
consumption of the display.
STANDBY mode is used when the display is connected to an
RS-232C cable or when using the INPUT DETECT function.
ECO STANDBY uses less power, but the RS-232C and
INPUT DETECT functions are not available.
NOTE:Depending on the PC and video card used, this
function may not operate.
Selecting a video source
To view a video source:
Use the input button to set [VIDEO].
Use the COLOR SYSTEM menu to set [AUTO], [NTSC],
[PAL], [SECAM], [PAL60], [4.43NTSC], according to your
video format.
Aspect ratio
of image
NORMAL
ZOOM
(DYNAMIC)
FULL
WIDE 4:3
Squeeze
LetterboxUnchanged view*5Recommended selection
for picture aspect*5
*5 Grey areas indicate unused portions of the screen.
Power Indicator
Mode Status Indicator LightPower ON Green*2
Power OFF (Eco Standby)*1RedPower consumption under 0.5W*3
Power OFF (Standby) AmberPower consumption  under 2W*3, *4
Power Save Amber BlinkingPower consumption under 2W*3
Power Standby when Green and Amber blink alternately“SCHEDULE SETTINGS” enabled
Diagnosis (Detecting failure) Red Blinking
(See Troubleshooting page 34)*1 When in Eco Standby Mode RS-232C and LAN controls do not function.
*2 If “OFF” is selected in POWER INDICATOR (page 23), the LED will not light when
the LCD monitor is in active mode.
*3 “RS-232C” is selected in EXTERNAL CONTROL.
*4 No DVI or HDMI connections.
Picture Aspect
DVI, VGA, RGB/HV
FULL ZOOM NORMAL
HDMI, DVD/HD1, DVD/HD2, SCART, VIDEO1, VIDEO2, S-VIDEO, TV*
FULL WIDE ZOOM NORMAL
*: The product you purchased may not have this feature.
 
						

							English-18
 
BRIGHTNESS level set
for the monitor to use
when ambient lighting
level is low.
BRIGHTNESS level set for the
monitor to use when ambient
lighting level is high.
BRIGHTNESS range
IN BRIGHT: BRIGHTNESS level set for the monitor to use when ambient lighting level is high.
IN DARK: BRIGHTNESS level set for the monitor to use when ambient lighting level is low.
Figure 1
dark brightroom bright condition
Screen Brightness value by AMBIENT mode
Picture Mode
DVI, VGA, RGB/HV
STANDARD sRGB AMBIENT1 AMBIENT2 HIGHBRIGHT
HDMI, DVD/HD1, DVD/HD2, SCART, VIDEO1, VIDEO2, S-VIDEO, TV*
STANDARD CINEMA AMBIENT1 AMBIENT2 HIGHBRIGHT
AMBIENT Mode
The brightness of the LCD screen can be set to increase or decrease depending on the amount of ambient light within the
room. If the room is bright, the monitor becomes correspondingly bright. If the room is dim, then the monitor will dim
accordingly. The purpose of this function is to make the viewing experience more comfortable to the eye in a variety of lighting
conditions.
NOTE:When picture mode is set to AMBIENT1 or AMBIENT2, BRIGHTNESS, AUTO BRIGHTNESS and BRIGHTNESS in
SCREEN SAVER function are disabled.
Do not cover anbibrint sensor when you use AMBIENT1 or AMBIENT2 in PICTURE MODE.
AMBIENT parameter setting
PICTURE MODE in OSD, select AMBIENT1 or AMBIENT2 and set IN BRIGHT and IN DARK.
IN BRIGHT: This is the brightness level that the monitor will go up to when the ambient light level is highest.
IN DARK: This is the level of brightness that the monitor will go down to when the ambient light level is low.
When the AMBIENT function is enabled the Brightness level of the screen changes automatically according to the lighting
conditions of the room (Figure 1).
IN DARK IN BRIGHT
Information OSD
The Information OSD provides information such as: Monitor ID, Input Source, Picture Size, etc.
Press the DISPLAY button on the remote to bring up the Information OSD.
 ID number assigned to current monitor*6
 ID number assigned monitor to be controlled via RS-232C*7
 Input Name
 Audio input mode
 Picture aspect
 Input Signal Information
 Sub picture information
*6: “IR CONTROL” should be set “Primary” or “Secondary”.
*7: “IR CONTROL” should be set “Primary”.
*: The product you purchased may not have this feature.