NEC Multisync V421 Users Manual

User’s Manual
MultiSync V321
MultiSync V421
MultiSync V461
 

Index
Important Information ........................................................................\
........................................................... English-1
Warning, Caution ........................................................................\
....................................... ................. English-1
Registration Information ........................................................................\
............................... ........................ English-1
Safety...

English-1
English
Important Information
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT
USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS
THE PRONGS CAN BE FULLY INSERTED.
REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROMWALL SOCKET. TO FULLY...

English-2
Canadian Department of Communications Compliance Statement
DOC: This Class B digital apparatus meets all requirements of the Canadian In\
terference-Causing Equipment Regulations.
C-UL:  Bears the C-UL Mark and is in compliance with Canadian Safety Regulatio\
ns according to CAN/CSA C22.2 No. 60950-1.
FCC Information
1. Use the attached specified cables with the MultiSync V321 (L329N8)/Mul\
tiSync V421 (L429N9)/MultiSync V461 (L469NA)
color monitor so as not to interfere with radio and...

English-3
EnglishFOR OPTIMUM PERFORMANCE, PLEASE NOTE THEFOLLOWING WHEN SETTING UP AND USING THE MULTI-FUNCTION MONITOR:
• DO NOT OPEN THE MONITOR . There are no user
serviceable parts inside and opening or removing covers
may expose you to dangerous shock hazards or other risks.
Refer all servicing to qualified service personnel.
• Do not spill any liquids into the cabinet or use your monitor near water.
• Do not insert objects of any kind into the cabinet slots, as they may touch dangerous voltage...

English-4
Contents
Power Cord*1
Setup Manual
Video Signal Cable
(Mini D-SUB 15 pin to Mini D-SUB 15 pin)
Wireless Remote Controland AAA  Batteries Clamp x 2
Your new MultiSync monitor box* should contain the following:
• LCD monitor
• Power Cord*
1
• Video Signal Cable
• Setup Manual
• Wireless Remote Control and AAA Batteries
• Main switch cover
• Clamp x 2
• Screw for clamp (M4 x 8) x 2
• Screw for main switch cover (3 x 6) x 2
• CD-ROM
CD-ROMScrew for clamp
(M4 x 8) x 2
*1Type and number of power...

English-5
EnglishThis device cannot be used or installed without the TabletopStand or other mounting accessory for support. For properinstallation it is strongly recommended to use a trained,NEC authorized service person. Failure to follow NECstandard mounting procedures could result in damage to theequipment or injury to the user or installer. Product warrantydoes not cover damage caused by improper installation.Failure to follow these recommendations could result invoiding the warranty.
Mounting
DO...

English-6
NOTE:
Regarding VESA mounting interface patterns on
V321, it is not centered over the Vertical Centerline
of screen as the above figure.
V421 and V461
Attaching Mounting Accessories
The display is designed for use with the VESA mounting
system.
1. Attach Mounting Accessories
Be careful to avoid tipping monitor when attaching
accessories.
V321
Mounting accessories can be attached with the monitor in
the face down position. To avoid damaging the screen face,
place the protective sheet on the...

English-7
English
4. Prevent Tipping
When using the display with the Tabletop Stand fasten the
LCD to a wall using a cord or chain that can support the
weight of the monitor in order to prevent the monitor from
falling. Fasten the cord or chain to the monitor using the
provided clamp and screw.
Before attaching the LCD monitor to the wall, make sure
that the wall can support the weight of the monitor.
Be sure to remove the cord or chain from the wall before
moving the LCD.
Screw (M4 x 8)Cord or chain...

English-8
 DOWN () button
Acts as 
 button to move the highlighted area down to
select adjustment items within OSD menu.
  EXIT button
Activates the OSD menu when the OSD menu is turned-off.
Acts as EXIT button within the OSD to move to previous
menu.
  Remote control sensor and Power Indicator
Receives the signal from the remote control (when using the
wireless remote control). See also page 10.
Glows green when the LCD monitor is in active mode.
Glows red when the LCD is in POWER OFF mode.
When the...