NEC Multisync P221w Users Manual

English
English-9
Figure S.1
4. Place one hand around the base and one hand on the Quick Release Lever. Move the Quick Release Lever in the direction
indicated by the arrows (Figure S.2).
5. Lift up the bottom of the stand to unhook it from the monitor (Figure S.3). The monitor can now be mounted using and
alternate method. Reverse process to reattach stand.
NOTE:Use only VESA-compatible alternative mounting method (100 mm pitch).
NOTE:Handle with care when removing monitor stand.
Figure S.2
Flexible Arm...

English-10
Controls
OSD (On-Screen Display) control buttons on the front of the monitor function
as follows:
To access OSD menu, press any of the control buttons (EXIT, LEFT, RIGHT, UP, DOWN).
To change signal input, press the SELECT button.
NOTE:OSD must be closed in order to change signal input.
*The “LEFT/RIGHT” and “UP/DOWN” buttons functionality is interchangeable depending on the orientation
(landscape/portrait) of the OSD.
Brightness/Contrast Controls
BRIGHTNESS
Adjusts the overall image and...

English
English-11
ECO MODE
Decreases the amount of power consumed by reducing the brightness level.
OFF: Set brightness variable range from 0% to 100%.
1: Set brightness variable range from 0% to 75%.
2: Set brightness variable range from 0% to 50%.
CUSTOM: Decreases the brightness level as determined by the user.
Refer to the Advanced OSD menu for custom setting instructions.
AUTO BRIGHTNESS
OFF: No function.
ON: Adjusts the brightness automatically, by detecting the brightness level of your...

English-12
Colour Control Systems
Colour Control System: Nine colour presets select the desired colour setting (sRGB, NATIVE, Option1 and Option2
colour presets are standard and cannot be changed).
R,G,B: Increases or decreases Red, Green or Blue colour depending upon which is selected.  The change in colour
will appear on screen and the direction (increase or decrease) will be shown by the bars.
NATIVE: Original colour presented by the LCD panel that is unadjustable.
sRGB: sRGB mode dramatically...

English
English-13
FACTORY PRESET
Selecting Factory Preset allows you to reset all OSD control settings (BRIGHTNESS, CONTRAST, ECO MODE,
AUTO BRIGHTNESS, BLACK LEVEL, IMAGE CONTROLS, COLOUR CONTROL SYSTEMS, DVI SELECTION,
VIDEO DETECT, EXPANSION MODE, OFF TIMER, OFF MODE, OSD LEFT/RIGHT, OSD DOWN/UP, OSD TURN
OFF) back to the factory settings. Individual settings can be reset by highlighting the control to be reset and pressing
the RESET button.
MENU Tools
LANGUAGE
OSD control menus are available in...

English-14
Specifications
Monitor Specifications MultiSync P221W Monitor Notes
LCD Module Diagonal: 55.9 cm/22.0 inches Active matrix; thin film transistor (TFT) liquid
Viewable Image Size: 55.9 cm/22.0 inches crystal display (LCD); 0.282 mm dot pitch;
Native Resolution (Pixel Count): 1680 x 1050 300 cd/m
2 white luminence; 1000:1 contrast
ratio, typical.
Input Signal Video: ANALOG 0.7 Vp-p/75 Ohms Digital Input: DVI
Sync:Separate sync.TTL Level
Horizontal sync. Positive/Negative
Vertical sync....

English
English-15
Features
Ambix Technology: Dual input technology allowing both analog and digital inputs off of one connector (DVI-I) as well as additional
legacy analog support off of a traditional 15-pin mini D-SUB connector. Provides traditional MultiSync technology compatibility for
analog as well as TMDS-based (Transition Minimized Differential Signalling) digital compatibility for digital inputs. TMDS-based digital
interfaces include DVI-D, DFP and P&D.
DVI-I: The integrated interface ratified...

English-16
Troubleshooting
No picture
•The signal cable should be completely connected to the display card/computer.
•The display card should be completely seated in its slot.
•Check the Vacation Switch should be in the ON position (see page 7).
•Front Power Switch and computer power switch should be in the ON position.
•Check to make sure that a supported mode has been selected on the display card or system being used.
(Please consult display card or system manual to change graphics mode.)
•Check the...

English
English-17
Appendix
If you need detailed information about the controls, please use the advanced menu.

•Turn off your monitor.
•Turn on your monitor by pushing the “POWER” and “SELECT” button at the same time for at least one second
simultaneously. Then press the control buttons (EXIT, LEFT, RIGHT, UP, DOWN).
•You will see the Advanced menu.
This menu is larger than the normal OSD.

•Turn off and restart your monitor in the normal way.
To make an adjustment, ensure that the tag is highlighted,...

English-18 Input Resolution Selects resolution’s priority of input signal to one of the following pair:
(Analog input only) 1360 x 768, 1680 x 1050 or 1280 x 768, 1680 x 1050 or 1024 x 768, 1400 x 1050.
1360 x 768, 1680 x 1050: Determines the resolution to 1360 x 768, 1680 x 1050.
1280 x 768, 1680 x 1050: Determines the resolution to 1280 x 768, 1680 x 1050.
1024 x 768, 1400 x 1050: Determines the resolution to 1024 x 768, 1400 x 1050.
Tag4 Color Control Colour Control System: Nine colour presets select...