NEC Multisync Lcd4620 Users Manual

							English-29
English
NOTE 1: CREATING A SCHEDULE
The schedule function allows the display to be set to power on and off at different times. Up to seven different schedules can be
programmed.
To program the schedule:
1. Enter the SCHEDULE menu. Highlight SCHEDULE SETTING using the up and down buttons. Press the SET or the + button to enter the
Settings menu. Highlight the desired schedule number and press set. The box next to the number will turn yellow. The schedule can now
be programmed.
2. Use the up and down arrows to highlight INPUT. Use the + and - buttons to choose the input source.
3. After the INPUT source is selected, use the down button to highlight the hours setting in the ON timeslot. Use the + and - buttons to set the
hour. Use the up and down buttons to highlight the minutes setting. Use the + and - buttons to set the minutes. Set the OFF time in the
same manner.
4. Use the down button to select a day on which the schedule will be enabled. Push the set button to enable. If the schedule is to be ran
every day, use the choose EVERY DAY and press the SET button the circle next to EVERY DAY will turn yellow. If a weekly schedule is
desired, choose the days of the week using the up and down buttons and pressing SET to select. Then highlight the EVERY WEEK option
and press SET.
5. After a schedule is programmed the remaining schedules can then be set. Press MENU to leave the OSD or press EXIT to go back to the
previous menu.
Note: If schedules are overlapping then the schedule with the highest number will have priority over the schedule with the lowest number.
For example schedule #7 will have priority over schedule #1.
SCHEDULE:
INPUT: DVI
ON:  10 : 30
OFF:  17 : 45
• EVERY DAY
 MON TUE WED THU
 FRI SAT SUN
 EVERY WEEK
DVI
TODAY:           SEP.27.2006 12:18
SETTINGS:OFF TIMER
SCHEDULE SETTING
SCHEDULE LIST
DATE & TIME
SCHEDULE RESET RESET1234567
ChooseMarkReturnClose
SCAN MODE* Some video formats may require scan conversion in order to best display the image.INPUT HDMI, DVD/HD, VIDEO, TV only
OVER SCAN Image size is larger than what can be displayed. The image edge will appear cropped.
Approximately 95% of the image will be shown on the screen.
UNDER SCAN Image size stays within the display area. The whole image is displayed on the screen.
ADVANCED OPTION Resets the following settings within the ADVANCED OPTION menu back to factory setting:
RESET INPUT DETECT, LONG CABLE ON/OFF, LONG CABLE MANUAL, DVI MODE, SCAN
CONVERSION, S-VIDEO MODE, SCAN MODE.
FACTORY RESET Resets OSD options back to factory settings EXCEPT FOR: CHANGE SECURITY
PASSWORD and SECURITY PASSWORD.
TV TUNER* REGION Selects region.
CHANNEL SEARCH Automatically stores available channels.
CHANNEL EDIT Manually adds or removes channels from TV mode.
*: The product you purchased may not have this feature.
 
						

							English-30 NOTE 2: IMAGE PERSISTENCE
Please be aware that LCD Technology may experience a phenomena known as Image Persistence. Image Persistence occurs when a
residual or “ghost” image of a previous image remains visible on the screen. Unlike CRT monitors, LCD monitors’ image persistence is not
permanent, but constant images being displayed for a long period of time should be avoided.
To alleviate image persistence, turn off the monitor for as long as the previous image was displayed. For example, if an image was on the
monitor for one hour and a residual image remains, the monitor should be turned off for one hour to erase the image.
As with all personal display devices, NEC DISPLAY SOLUTIONS recommends displaying moving images and using a moving screen
saver at regular intervals whenever the screen is idle or turning off the monitor when not in use.
Please set “SCREEN SAVER”, “DATE &TIME” and “SCHEDULE SETTINGS” functions to further reduce the risk of Image persistence.
For long life use of Public Display
< Image Sticking of LCD Panel >
When LCD panel is operated continuously for long hours, a trace of electric charge remains near the electrode inside LCD, and residual or
“ghost” image of previous image may be observed. (Image Persistence)
Image Persistence is not permanent, but when fixed image is displayed for long period, ionic impurities inside LCD are accumulated along
the displayed image, and it is observed permanently. (Image Sticking)
< Recommendations >
For preventing the fast transition to Image Sticking, and for longer life usage of LCD, following are recommended.
1. Fixed image should not be displayed for long period, and changed to another images with short cycle.
2. When no use, please turn off the monitor by remote control, or use Power Management Function of monitor or use Schedule Function of
monitor.
3. Reducing the environmental temperature is effective for long life use.
When Protection board (glass, acryl) is installed over the LCD surface, enclosed into the box / wall, or stack the monitor, please utilize the
temperature sensors inside monitor.
To reduce the environmental temperature, the monitor should be set Low Brightness or Cooling Fan “ON” by using Screen sever Function.
4. Please use “Screen Saver Mode” of monitor.
Remote Control ID Function
REMOTE CONTROL ID
The remote control included with the display can be used to control up to 26 individual
MultiSync monitors using what is called the REMOTE CONTROL ID mode. The REMOTE
CONTROL ID mode works in conjunction with the Monitor ID, allowing control of up to 26
individual MultiSync monitors. For example: if there are many monitors being used in the
same area, a remote control in normal mode would send signals to every monitor at the
same time Figure 1. Using the remote in REMOTE CONTROL ID mode will only operate
one specific monitor within the group Figure 2.
TO SET REMOTE CONTROL ID
While holding down the REMOTE ID SET button on the remote control, use the KEYPAD
to input the Monitor ID (1-26) of the display to be controlled via remote. The remote can
then be used to operate the monitor having that specific Monitor ID number.
When 0 is selected or when the remote control is in normal mode, all monitors will be
operated.
TO SET REMOTE CONTROL ID
ID Mode - To enter ID Mode press the REMOTE ID SET button and hold down for 2
seconds.
Normal Mode - To return to Normal Mode press the REMOTE ID RESET button and hold
down for 2 seconds.
In order for this feature to work properly, the display must be assigned a Monitor ID
number. The Monitor ID number can be assigned under the MULTI DISPLAY menu in the
OSD (See page 27).
Press the “DISPLAY” button on the remote to bring up the Information OSD. The
Information OSD shows the monitor ID number and other information such as signal type,
zoom method, etc.
Monitor ID:1 Monitor ID:2 Monitor ID:3
Monitor ID:1 Monitor ID:2 Monitor ID:3
Remote does
not workRemote does
not workRemote works Remote works Remote works Remote works
Figure 1
Remote in
Normal mode or
the REMOTE ID
is set to 0
Figure 2
Remote set up to
use REMOTE
ID:3
 
						

							English-31
English
This LCD monitor can be controlled via personal computer or wireless remote control using an RS-232C connection.
MONITOR ID and IR CONTROL
Using one PC or one infrared wireless controller, up to 26 individual LCD4020/LCD4620 monitors can be controlled through a daisy chain
via RS-232C connection.
1. Connect PC and LCD4020/LCD4620.
Connect a PC’s RS-232C control output to the LCD4020/LCD4620’s RS-232C input. You can then connect the RS-232C output from the
LCD4020/LCD4620 to another LCD4020/LCD4620’s RS-232C input. Up to 26 monitors can be connected using RS-232C.
2. Set Monitor ID and IR Control mode.
For proper operation, the Monitor ID should be set in the OSD menu of each monitor that is in the chain. The Monitor ID can be set under
the “MULTI DISPLAY” menu in the OSD. The Monitor ID number can be set within a range from 1 to 26. No two monitors should share the
same Monitor ID number. It is recommended to number each monitor in a daisy chain sequentially from 1. The first monitor in the daisy
chain is designated as the primary monitor. Subsequent monitors with the chain are secondary monitors.
In the “ADVANCED OPTION” menu on the first monitor in the RS-232C daisy chain set the “IR CONTROL” to “PRIMARY”.
Set the “IR CONTROL” to “SECONDARY” on all other monitors.
3. Press the “DISPLAY” button on the remote control while aiming at the “PRIMARY” monitor. The Information OSD will be shown at
top left side of the screen.
Monitor ID: Displays the ID number of the current monitor within the daisy chain.
Target ID: Displays the ID number of the monitor that to be controlled via daisy chain from the current monitor.
Press the “+” or “-” buttons to change the “Target ID” to show the ID number of the monitor to be controlled. To control the entire daisy
chained monitors simultaneously, select “ALL” as the “Target ID.”
Note: If the monitor is in ECO Standby mode, RS-232C functionality is stopped.
4. Use the wireless remote controller to control the “SECONDARY” monitor while aiming at the “PRIMARY” monitor.
The “MENU OSD” will appear on the selected target monitor.
NOTE:If the “ID No.” mode select OSD is showing, press the “DISPLAY” button on the remote control while pointing at the “PRIMARY”
monitor to clear this OSD.
HINT:If you lost control due to the incorrect setting of “IR CONTROL”, pressing the “DISPLAY” button on the remote control for 5 or
more seconds will reset the “IR CONTROL” menu to “NORMAL” function.
 
						

							English-32
Controlling the LCD monitor via RS-232C Remote Control
This LCD monitor can be controlled by connecting a personal computer with a RS-232C terminal.
Functions that can be controlled by a personal computer are:
•Power ON or OFF
•Switching between input signals
Connection
LCD Monitor + PC
NOTE:If your PC (IBM or IBM compatible) is equipped only with a 25-pin serial port connector, a 25-pin serial port adapter is
required. Contact your dealer for details.
*In order to function, the RS-232C OUT terminal can only be connected to another monitor of the same model.
Do not connect to other types of equipment.
The following control sequence is used for a single LCD4020/LCD4620. To control multiple LCD4020/LCD4620 monitors that
are daisy-chained together please use the extended control command. Instructions for the extended control command can be
found on the CD included with the display. The file is called “External_control_LCD4X20.pdf”. When using the following
control commands, all of the daisy-chained monitors can be controlled at the same time from one monitor. Reply and status
commands, however, will only pertain to the primary monitor, not secondary monitors.
1) Interface
This LCD monitor uses RXD, TXD and GND lines for RS-232C control.
2) Control command diagram
The command is structured by the address code, function code, data code and end code. The length of the command is
different for each function.
[Address code] 30h 30h (ASCII code, 0 0), fixed.
[Function code] A code of each fixed control move.
[Data code] A code of each fixed control data (number) and not always indicated.
[End code] 0Dh (In ASCII code, 
) fixed.
PROTOCOLRS-232C
BAUD RATE 9600  [bps]
DATA LENGTH 8  [bits]
PARITY BIT NONE
STOP BIT 1 [bits]
FLOW CONTROL NONE
Address code Function code Data code End code
HEX 30h 30h Function Data 0Dh
ASCII 0 0 Function Data
RS-232C Cable PC
(Out)
RS-232C CableRS-232C (OUT)
MultiSync RS-232C (IN) RS-232C (OUT) RS-232C (IN)
IN OUTMultiSync MultiSync
 
						

							English-33
English
3) Control sequence
(1) The command from a computer to the LCD monitor will be sent in 400ms.
(2) The LCD monitor will send a return command 400ms* after it has received and encoded. If the command isn’t
received correctly, the LCD monitor will not send the return command.
(3) The personal computer checks the command and confirms if the command, which has been sent, has been executed or not.
(4) This LCD monitor sends various codes other than return code. When having a control sequence by RS-232C, reject other
codes from personal computers side.
*: The sending time of return command may delay depending on the condition (during changing of the input signal, etc.).
Example: Turn the power ON ( ’  ’ is for ASCII code)
4) Operation commands
The operation commands execute the basic operation setting of this LCD monitor.
It may not operate when changing the signal:
•POWER OFF command should be operated over 1 minute after the power is turned on.
•POWER ON command should be operated over 1 minute after the power is turned off.
*1 S-VIDEO is enabled by having the “S-VIDEO” cable connected with the “S-VIDEO” signal present and selecting “PRIORITY MODE”.
*2 S-VIDEO is SEPARATE only.
5) Read command
Host computer sends the command without Data-code to monitor.
After receiving this command, the monitor returns the command with Data-code of current status to host computer.
< ex. > When Host computer ask Power status of monitor, the status of monitor is powered-on.
Command from computer Command from Monitor Detail of command
30 30 76 50 0D    00vP[enter] Ask about the power status of monitor.
30 30 76 50  31 0D    00vP1[enter] Monitor is powered-on.
Structure of the Read-command
Function Data (Receive) Function Data (Receive)
ON vP 1 76 50 31
OFF(stand by) vP 0 76 50 30
DVI(DVI-D) vI r1 76 49 72 31
VGA(D-SUB) vI r2 76 49 72 32
RGB/HV(BNC) vI r3 76 49 72 33
HDMI vI h1 76 49 68 31
Video vI v1 76 49 76 31
DVD/HD vI v2 76 49 76 32
S-VIDEO vI v3 76 49 76 33
TV vI t1 76 49 74 31
HIGHBRIGHT vM p1 76 4D 70 31
STANDARD vM p2 76 4D 70 32
resolution 0.5˚C tcx1 (ex.) +25.0 74 63 78 31 2B 20 32 35 2E 30
resolution 1˚C tc1 (ex.) +25 74 63 31 2B 20 32 35
resolution 0.5˚C tcx2 (ex.) +30.5 74 63 78 32 2B 20 33 30 2E 35
resolution 1˚C tc2 (ex.) +31 74 63 32 2B 20 33 31
resolution 0.5˚C tcx3 (ex.) +30.5 74 63 78 33 2B 20 33 30 2E 35
resolution 1˚C tc3 (ex.) +31 74 63 33 2B 20 33 31
NOTE: For complete information please see file “External_Control_LCD4X20.pdf” on the CD-ROM.
Sending commands
from the PCStatus code from
LCD monitorMeaning
30 30 21 0D
’0’ ’0’ ’!’ ’
’
30 30 21 0D
’0’ ’0’ ’!’ ’
’Command received
(Command echoed back)Command for
POWER ON
Input
Picture mode
Temperature
of Internal
monitorAround
AV board
Around
Inverter
PCB POWER
ASCII HEX
Operation ASCII HEX
POWER ON ! 21h
POWER OFF  22h
INPUT DVI _r1 5Fh  72h  31h
INPUT VGA _r2 5Fh  72h  32h
INPUT RGB/HV _r3 5Fh  72h  33hOperation ASCII HEX
INPUT HDMI _h1 5Fh  68h  31h
INPUT VIDEO*
1_v1 5Fh  76h  31h
INPUT DVD/HD _v2 5Fh  76h  32h
INPUT S-VIDEO*
2_v3 5Fh  76h  33h
INPUT TV _t1 5Fh  74h  31h
Around
Mainboard
 
						

							English-34
Features
Reduced Footprint: Provides the ideal solution for environments requiring superior image quality but with size and weight
limitations.
Colour Control Systems: Allows you to adjust the colours on your screen and customize the colour accuracy of your monitor
to a variety of standards.
OmniColor: Combines Six-axis colour control and the sRGB standard. Six-axis colour control permits colour adjustments via
six axes (R, G, B, C, M and Y) rather than through the three axes (R, G and B) previously available. The sRGB standard
provides the monitor with a uniform colour profile. This assures that the colours displayed on the monitor are exactly the same
as on the colour printout (with sRGB supporting operating system and sRGB printer). This allows you to adjust the colours on
your screen and customise the colour accuracy of your monitor to a variety of standards.
sRGB Colour Control: A new optimized colour management standard which allows for colour matching on computer displays
and other peripherals. The sRGB standard, which is based on a calibrated colour space, allows for optimal colour
representation and backward compatibility with other common colour standards.
OSD (On-Screen-Display) Controls: Allow you to quickly and easily adjust all elements of your screen image via simple to
use on-screen menus.
Plug and Play: The Microsoft
® solution with the Windows® operating system facilitates setup and installation by allowing the
monitor to send its capabilities (such as screen size and resolutions supported) directly to your computer, automatically
optimizing display performance.
IPM (Intelligent Power Manager) System: Provides innovative power-saving methods that allow the monitor to shift to a
lower power consumption level when on but not in use, saving two-thirds of your monitor energy costs, reducing emissions
and lowering the air conditioning costs of the workplace.
FullScan Capability: Allows you to use the entire screen area in most resolutions, significantly expanding image size.
VESA Standard (FDMIv1) Mounting Interface: Allows users to connect their LCD monitor to any VESA standard (FDMIv1)
third party mounting arm or bracket. Allows for the monitor to be mounted on a wall or an arm using any third party compliant
device. NEC recommends using mounting interface that comply with TÜV-GS and/or UL1678 standard in North America.
DVI-D: The digital-only subset of DVI ratified by the Digital Display Working Group (DDWG) for digital connections between
computers and displays. As a digital-only connector, analog support is not provided off a DVI-D connector. As a DVI-based
digital only connection, only a simple adapter is necessary for compatibility between DVI-D and other DVI-based digital
connectors such as DFP and P&D. The DVI interface of this display supports HDCP.
TILE MATRIX, TILE COMP: Demonstrates multiple screens with an accurate image and compensates for the bezel width.
ZOOM: Expands the image individually for horizontal and vertical direction.
RS-232C daisy chain: You can control the multiple monitors by controller or wireless remote controller.
Self-diagnosis: When an internal error should occur, a failure state will be indicated.
CableComp: Automatic long cable compensation prevents image quality degradation (colour shift and dull signals) caused by
long cable lengths.
 
						

							English-35
English
Troubleshooting
No picture
•The signal cable should be completely connected to the
display card/computer.
•The display card should be completely seated in its slot.
•Front Power Switch and computer power switch should
be in the ON position.
•Check to make sure that a supported mode has been
selected on the display card or system being used.
(Please consult display card or system manual to
change graphics mode.)
•Check the monitor and your display card with respect to
compatibility and recommended settings.
•Check the signal cable connector for bent or pushed-in
pins.
Power Button does not respond
•Unplug the power cord of the monitor from the AC outlet
to turn off and reset the monitor.
Image persistence
•Please be aware that LCD Technology may experience a
phenomenon known as Image Persistence. Image
Persistence occurs when a residual or “ghost” image of a
previous image remains visible on the screen. Unlike
CRT monitors, LCD monitors’ image persistence is not
permanent, but constant images being displayed for a
long period of time should be avoided. To alleviate image
persistence, turn off the monitor for as long as the
previous image was displayed. For example, if an image
was on the monitor for one hour and a residual image
remains, the monitor should be turned off for one hour to
erase the image.
NOTE:As with all personal display devices, NEC DISPLAY
SOLUTIONS recommends displaying moving
images and using a moving screen saver at regular
intervals whenever the screen is idle or turning off
the monitor when not in use.
Image is unstable, unfocused or swimming is apparent
•Signal cable should be completely attached to the
computer.
•Use the OSD Image Adjust controls to focus and adjust
display by increasing or decreasing the fine adjustment.
When the display mode is changed, the OSD Image
Adjust settings may need to be re-adjusted.
•Check the monitor and your display card with respect to
compatibility and recommended signal timings.
•If your text is garbled, change the video mode to non-
interlace and use 60Hz refresh rate.
Image of component signal is greenish
•Check to see if the DVD/HD input connector is selected.
LED on monitor is not lit
(no green or red colour can be seen)
•Power Switch should be in the ON position and power
cord should be connected.
•Make certain the computer is not in a power-saving
mode (touch the keyboard or mouse).RED LED on monitor is blinking
•A certain failure might have occurred, please contact
your nearest authorized NEC DISPLAY SOLUTIONS
service facility.
Display image is not sized properly
•Use the OSD Image Adjust controls to increase or
decrease the coarse adjustment.
•Check to make sure that a supported mode has been
selected on the display card or system being used.
(Please consult display card or system manual to
change graphics mode.)
Selected resolution is not displayed properly
•Use OSD Display Mode to enter Information menu and
confirm that the appropriate resolution has been
selected. If not, select corresponding option.
No Sound
•Check to see if speaker cable is properly connected.
•Check to see if mute is activated.
•Check to see if volume is set at minimum.
Remote Control is not available
•Check the Remote Control’s batteries status.
•Check if batteries are inserted correctly.
•Check if the Remote Control is pointing at the monitor’s
remote sensor.
•Check the Remote Control Mode status.
•The remote control system may not function when direct
sunlight or strong illumination strikes the remote control
sensor of the LCD monitor, or when there is an object in
the path.
“SCHEDULE”/“OFF TIMER” function is not working
properly
•The “SCHEDULE” function will be disabled when the
“OFF TIMER” is set.
•If the “OFF TIMER” function is enable and the power to
the LCD monitor is turned off if the power supply is
interrupted unexpectedly, then the “OFF TIMER” will be
reset.
RS-232C is not working
•Make sure the monitor is not in “Eco Standby” mode
(see page 27).
Snowy Picture, Poor Sound in TV
•Check antenna/cable connection. Use new cable if
necessary.
Interference in TV
•Check components for shielding, move away from
monitor if necessary.
Either light vertical or horizontal stripes may appear, depending on the specific display pattern. This is no product fault or
degradation.
 
						

							English-36
Specifications - LCD4020
Product Specifications
LCD Module 40 /101.6cm diagonal
Pixel Pitch: 0.648mm
Resolution: 1366 x 768 dots
Colour: Over 16 million colours (depending on video card used)
Brightness: 700cd/m
2 (Max.), 500cd/m2 (Typ.)
Contrast Ratio: 1200:1
Viewing Angle: Up 89°/ Down 89°/ Left 89°/ Right 89° (typ) @ CR>10
Design View Distance: 1100mm
Frequency Horizontal: 15.625/15.734kHz, 31.5kHz - 91.1kHz (Analog Input)
31.5kHz - 91.1kHz (Digital Input)
Vertical: 50.0 - 85.0 Hz
Pixel Clock 25.2MHz - 162.0MHz
Viewable Size 885.168 x 497.664mm
Input Signal
DVI DVI-D 24pin Digital RGB DVI (HDCP)
VGA60, SVGA60, XGA60, WXGA60, SXGA60, UXGA60*, 1920X1080* (60Hz)
VGA 15pin Mini D-sub Analog RGB 0.7V p-p, Input Impedance 75 ohm
VGA60, SVGA60, XGA60, WXGA60, SXGA60, UXGA60*, 1920X1080* (60Hz)
Sync Separate: TTL level (Pos./Neg.)
Composite sync on Green Video: 0.3Vp-p Neg.
RGB/HV BNC (R,G,B,H,V) Analog RGB 0.7V p-p, Input Impedance 75 ohm
VGA60, SVGA60, XGA60, WXGA60, SXGA60, UXGA60*, 1920X1080* (60Hz)
Sync Separate: TTL level (Pos./Neg.)
Composite sync on Green Video: 0.3Vp-p Neg.
HDMI HDMI Type-A Digital RGB HDMI
1080p*, 1080i*, 720p@50Hz/60Hz, 576p@50Hz, 480p@60Hz
DVD/HD RCA (Y, Cb/Pb, Cr/Pr) Component Y : 1.0Vp-p/75ohm, Cb/Cr (Pb/Pr) : 0.7Vp-p/75 ohm
HDTV/DVD:1080p*, 1080i*, 720p@50Hz/60Hz, 576p@50Hz, 480p@60Hz, 576i@50Hz, 480i@60Hz
VIDEO BNC Composite 1.0V p-p Input Impedance 75 ohm
RCA NTSC/PAL/SECAM/4.43NTSC/PAL60
S-VIDEO Mini DIN 4 pin S-VIDEO Y: 1.0Vp-p/75 ohm C: 0.286Vp-p/75 ohm (NTSC), 0.3Vp-p/75 ohm (PAL/SECAM)
NTSC/PAL/SECAM/4.43NTSC/PAL60
Output Signal
RGB/HV BNC (R,G,B,H,V) Analog RGB Analog RGB Video: 0.7V p-p with 75 ohm terminated
Separate HV sync: TTL level (Posi / Nega)
VIDEO BNC Composite Composite 1.0V p-p with 75 ohm terminated
AUDIO
AUDIO RCA (L/R) X2 Analog Audio Stereo L/R 0.5Vrms
Input STEREO Mini Jack
HDMI Type-A Digital Audio PCM 32, 44.1, 48KHz (16/20/24bit)
AUDIO STEREO Mini Jack Analog Audio STEREO Mini Jack L/R: 1, 0.5Vrms
Output
Speaker Output External Speaker Jack 15W + 15W (8 ohm)
Control RS-232C In: 9 Pin D-sub
RS-232C Out: 9 Pin D-sub (with daisy chain)
TV F-connector: Antenna Impedance 75ohm
Channel Coverage: VHF: E2 to E12/R1 to R12
UHF: E21 to E69
CATV: S1 to S41
Power Supply 3.0 - 1.2 A @ 100-240VAC, 50/60Hz
Operational Environment Temperature: 5 - 40°C (Default brightness), 5 - 20°C (Max brightness)
Humidity: 20 - 80% (without condensation)
Storage Environment Temperature: -20 - 60°C
Humidity: 10 - 90% (without condensation)/ 90% - 3.5% x (Temp - 40°C) regarding over 40°C
Dimension Net: 919.7 (W) x 567.7 (H) x 330 (D) mm (with stand)
919.7 (W) x 532.2 (H) x 140 (D) mm (without stand)
Gross: 1147 (W) x 761 (H) x 312 (D) mm
Weight Net: 31.1Kg (With stand), 29.4Kg (Without stand)
Gross: 38.9Kg
VESA compatible arm mounting interface 3 x 200mm x 200mm (8 Holes)
2 x 200 mm x 200 mm (6 Holes)
Complied Regulatory and Guidelines UL60950-1/CSA C22.2 No.60950-1/ TUV-GS/EN60950-1/NOM
FCC-B/DOC-B/EN55022-A/EN55024/EN61000-3-2/EN61000-3-3/CE/GOST-R
Power Management VESA DPM
Plug & Play VESA DDC2B, DDC/CI
Accessories User’s manual, Power Cord, Video Signal Cable, Remote Control, AA Battery x 2, Clamp x 3,
Screw x 9, CD-ROM, Stand x 2, Thumbscrew for stand x 2, Cable cover
NOTE: Technical specifications are subject to change without notice. *: Compressed image
 
						

							English-37
English
Specifications - LCD4620
Product Specifications
LCD Module 46 /116.8cm diagonal
Pixel Pitch: 0.7455mm
Resolution: 1366 x 768 dots
Colour: Over 16 million colours (depending on video card used)
Brightness: 650cd/m
2 (Max.), 500cd/m2 (Typ.)
Contrast Ratio: 1200:1
Viewing Angle: Up 89°/ Down 89°/ Left 89°/ Right 89° (typ) @ CR>10
Design View Distance: 1300mm
Frequency Horizontal: 15.625/15.734kHz, 31.5kHz - 91.1kHz (Analog Input)
31.5kHz - 91.1kHz (Digital Input)
Vertical: 50.0 - 85.0 Hz
Pixel Clock 25.2MHz - 162.0MHz
Viewable Size 1018.353 x 572.54mm
Input Signal
DVI DVI-D 24pin Digital RGB DVI (HDCP)
VGA60, SVGA60, XGA60, WXGA60, SXGA60, UXGA60*, 1920X1080* (60Hz)
VGA 15pin Mini D-sub Analog RGB 0.7V p-p, Input Impedance 75 ohm
VGA60, SVGA60, XGA60, WXGA60, SXGA60, UXGA60*, 1920X1080* (60Hz)
Sync Separate: TTL level (Pos./Neg.)
Composite sync on Green Video: 0.3Vp-p Neg.
RGB/HV BNC (R,G,B,H,V) Analog RGB 0.7V p-p, Input Impedance 75 ohm
VGA60, SVGA60, XGA60, WXGA60, SXGA60, UXGA60*, 1920X1080* (60Hz)
Sync Separate: TTL level (Pos./Neg.)
Composite sync on Green Video: 0.3Vp-p Neg.
HDMI HDMI Type-A Digital RGB HDMI
1080p*, 1080i*, 720p@50Hz/60Hz, 576p@50Hz, 480p@60Hz
DVD/HD RCA (Y, Cb/Pb, Cr/Pr) Component Y : 1.0Vp-p/75ohm, Cb/Cr (Pb/Pr) : 0.7Vp-p/75 ohm
HDTV/DVD:1080p*, 1080i*, 720p@50Hz/60Hz, 576p@50Hz, 480p@60Hz, 576i@50Hz, 480i@60Hz
VIDEO BNC Composite 1.0V p-p Input Impedance 75 ohm
RCA NTSC/PAL/SECAM/4.43NTSC/PAL60
S-VIDEO Mini DIN 4 pin S-VIDEO Y: 1.0Vp-p/75 ohm C: 0.286Vp-p/75 ohm (NTSC), 0.3Vp-p/75 ohm (PAL/SECAM)
NTSC/PAL/SECAM/4.43NTSC/PAL60
Output Signal
RGB/HV BNC (R,G,B,H,V) Analog RGB Analog RGB Video: 0.7V p-p with 75 ohm terminated
Separate HV sync: TTL level (Posi / Nega)
VIDEO BNC Composite Composite 1.0V p-p with 75 ohm terminated
AUDIO
AUDIO RCA (L/R) X2 Analog Audio Stereo L/R 0.5Vrms
Input STEREO Mini Jack
HDMI Type-A Digital Audio PCM 32, 44.1, 48KHz (16/20/24bit)
AUDIO STEREO Mini Jack Analog Audio STEREO Mini Jack L/R: 1, 0.5Vrms
Output
Speaker Output External Speaker Jack 15W + 15W (8 ohm)
Control RS-232C In: 9 Pin D-sub
RS-232C Out: 9 Pin D-sub (with daisy chain)
TV F-connector: Antenna Impedance 75ohm
Channel Coverage: VHF: E2 to E12/R1 to R12
UHF: E21 to E69
CATV: S1 to S41
Power Supply 3.4 - 1.35 A @ 100-240VAC, 50/60Hz
Operational Environment Temperature: 5 - 40°C (Default brightness), 5 - 20°C (Max brightness)
Humidity: 20 - 80% (without condensation)
Storage Environment Temperature: -20 - 60°C
Humidity: 10 - 90% (without condensation)/ 90% - 3.5% x (Temp - 40°C) regarding over 40°C
Dimension Net: 1055.4 (W) x 644.1 (H) x 351 (D) mm (with stand)
1055.4 (W) x 608.6 (H) x 140 (D) mm (without stand)
Gross: 1278 (W) x 837 (H) x 312 (D) mm
Weight Net: 37.9Kg (With stand), 36.1Kg (Without stand)
Gross: 47.1Kg
VESA compatible arm mounting interface 3 x 200mm x 200mm (8 Holes)
2 x 200 mm x 200 mm (6 Holes)
Complied Regulatory and Guidelines UL60950-1/CSA C22.2 No.60950-1/ TUV-GS/EN60950-1/NOM
FCC-B/DOC-B/EN55022-A/EN55024/EN61000-3-2/EN61000-3-3/CE/GOST-R
Power Management VESA DPM
Plug & Play VESA DDC2B, DDC/CI
Accessories User’s manual, Power Cord, Video Signal Cable, Remote Control, AA Battery x 2, Clamp x 3,
Screw x 9, CD-ROM, Stand x 2, Thumbscrew for stand x 2, Cable cover
NOTE: Technical specifications are subject to change without notice. *: Compressed image
 
						

							English-38
Pin Assignment
1) Analog RGB input (MiniDsub15p): VGA
Pin No Name
1Video Signal Red
2Video Signal Green
3Video Signal Blue
4GND
5DDC-GND
6Red-GND
7Green-GND
8Blue-GND
9+5V (DDC)
10 SYNC-GND
11 GND
12DDC-SDA
13 H-SYNC
14V-SYNC
15 DDC-SCL
2) S-VIDEO input: VIDEO
Pin No Name
1GND
2GND
3Y (Luminance)
4C (Chroma)
3) Digital RGB input (DVI-D): DVI
4) RS-232C input/output
Pin No Name
1connected to 7&8
2RXD
3TXD
4connected to 6
5GND
6connected to 4
7connected to 1&8
8connected to 1&7
9NC
Pin - Assignment of DVI connector:
1TX2- 9 TX1- 17 TX0-
2TX2+ 10 TX1+ 18 TX0+
3Shield (TX2 / TX4) 11 Shield (TX1 / TX3) 19 Shield (TX0 / TX5)
4NC 12NC20NC
5NC 13NC21NC
6DDC-Serial Clock 14 +5V power 22 Shield (TXC)
7DDC-Serial Data 15 Ground 23 TXC+
8NC16Hot plug detect 24 TXC-
5
10
151
6
11
1
65
9 Mini D-SUB 15P
D-SUB 9P1
172416 8
9
This LCD monitor uses RXD, TXD and GND lines for RS-232C control.