NEC Multisync Lcd4215 Users Manual

English-9
English
8 PIP (Picture In Picture) button
ON/OFF button: Toggle switches between PIP and POP.
See page 22.
INPUT button: Selects the “picture in picture” input signal.
CHANGE button: Replaces to the main picture and sub
picture.
NOTE: The “PIP” and “POP” modes do not function when
the screen size is “CUSTOM” or “REAL”.
1 POWER button
Switches the power on/off.
2 INPUT button
Selects input signal, [RGB1], [RGB2], [RGB3], [DVD/HD],
[VIDEO(S)] or [VIDEO].
3 AUDIO INPUT button
Selects audio input...

English-10
Operating Range for the Remote
Control
Point the top of the remote control toward the LCD monitor’s
remote sensor during button operation.
Use the remote control within a distance of about 7 m (23 ft.)
from the front of the LCD monitor’s remote control sensor or
at a horizontal and vertical angle of within 30° within a
distance of about 3.5 m (10 ft.)
Caution:Important, the remote
control system may
not function when
direct sunlight or strong
illumination strikes the remote control
sensor of...

English-11
English1. Determine the installation location
CAUTION:Installing your LCD display must be done by a
qualified technician. Contact your dealer for
more information.
CAUTION:
MOVING OR INSTALLING THE LCD MONITOR
MUST BE DONE BY TWO OR MORE PEOPLE.
Failure to follow this caution may result in injury if
the LCD monitor falls.
CAUTION:Do not mount or operate the display upside
down, face up, or face down.
CAUTION:This LCD has a temperature sensor and cooling
fan. If the LCD becomes too hot, the...

English-12
5. Switch on the power of all the attached
external equipment
When connected with a computer, switch on the power of
the computer first.
6. Operate the attached external
equipment
Display the signal from the desired input source.
7. Adjust the sound
Make volume adjustments when required.
8. Adjust the screen (See pages 21 and 22)
Make adjustments of the screen display position when
necessary.
9. Adjust the image (See page 21)
Make adjustments such as brightness or contrast when
required.
10....

English-13
English
Connections
Before making connections:
*First turn off the power of all the attached equipment and make connections.
*Refer to the user manual included with each separate piece of equipment.
Wiring Diagram
Personal computer BNC x 5 BNC x 3 RCA RCA
RCA
RCA
To DVI outputMini D-sub 15 pin
To DVD Component
video outputDVD playerTo audio output
BNC-to-RCA
adapter BNC x 3
To audio output
VCR
To composite Output
In case of VCRDVI-D connector
To audio output
To audio output
Equipment with...

English-14
Connecting a Personal Computer
Connecting your computer to your LCD monitor will enable you to display your computer’s screen image.
Some video cards and a pixel clock over 165MHz may not display an image correctly.
Your LCD monitor displays proper image by adjusting the factory preset timing signal automatically.

Connect the LCD Monitor to a Personal Computer
•To connect the RGB2 connector (mini D-sub 15 pin) on the LCD monitor, use the supplied PC - Video RGB signal cable
(mini D-sub 15 pin...

English-15
English
LCD monitor
Equipment with a
digital interface such
as a personal
computer with RGB
output (TMDS) DVI-D connector DVI-D connector
To DVI output
To audio output
Connect the LCD Monitor to a Computer with a Digital Output
•The RGB1 connector also accepts a DVI-D cable.
•Input TMDS signals conforming to DVI standards.
•To maintain display quality, use a cable that conforms to DVI standards.
•AUDIO IN 1, 2 and 3 can be used for audio input. To select audio source [AUDIO:1], [AUDIO:2] or...

English-16
Connect the LCD Monitor to a DVD Player
•To connect the DVD/HD IN connector (BNC) on the LCD monitor, use an BNC connector cable (sold separately).
Some DVD players may have different connectors such as DVI-D connector.
Select [DVI/HD] mode from the “DVI MODE” menu. For mode selection, see “DVI MODE” on page 24.
AUDIO IN 1, 2 and 3 can be used for audio input. To select audio source [AUDIO:1], [AUDIO:2] or [AUDIO:3] press the
AUDIO INPUT button.
Connecting a DVD Player with component out...

English-17
EnglishConnect the LCD Monitor to a Stereo Amplifier
•Turn on the LCD monitor and the amplifier only after all connections have been made.
•Use a stereo Mini-RCA cable to connect the AUDIO OUT connector (Stereo Mini Jack) on the LCD monitor to the audio
input on the amplifier.
•Do not reverse the audio left and right jacks.
•The AUDIO IN is used for audio input.
•The AUDIO OUT jack outputs sound from the selected Audio input.
Connecting to a Stereo Amplifier
You can connect your stereo...

English-18
Basic Operation
Power ON and OFF Modes
The LCD monitor power indicator will turn green while powered on and will turn red while powered off.
NOTE:The Main Power Switch must be in the ON position in order to power up the monitor using the remote control or the
Power Button on the front of the LCD.
Power Button
Main Power Switch
ON
OFF
Using the remote control