NEC Multisync Lcd3215 Users Manual

User’s Manual
MultiSync LCD3215
MultiSync LCD4215
 

Index
Important Information ................................................................................................................................... English-1
Warning, Caution ................................................................................................................................ English-1
Registration Information ............................................................................................................................... English-1
Safety Precautions,...

English-1
English
Important Information
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT
USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS
THE PRONGS CAN BE FULLY INSERTED.
REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM
WALL SOCKET. TO FULLY...

English-2
Canadian Department of Communications Compliance Statement
DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to CAN/CSA C22.2 No. 60950-1.
FCC Information
1. Use the attached specified cables with the MultiSync LCD3215 (L327HP)/MultiSync LCD4215 (L427HQ) color monitor
so as not to interfere with radio and television reception.
(1) Please...

English-3
EnglishFOR OPTIMUM PERFORMANCE, PLEASE NOTE THE
FOLLOWING WHEN SETTING UP AND USING
THE MULTI-FUNCTION MONITOR:
•DO NOT OPEN THE MONITOR. There are no user
serviceable parts inside and opening or removing covers
may expose you to dangerous shock hazards or other risks.
Refer all servicing to qualified service personnel.
•Do not spill any liquids into the cabinet or use your monitor
near water.
•Do not insert objects of any kind into the cabinet slots, as
they may touch dangerous voltage points,...

English-4
Contents
Power Cord*1
Setup Manual Video Signal Cable
(Mini D-SUB 15 pin to
Mini D-SUB 15 pin)
Wireless Remote Control
and AAA  BatteriesClamp x 2
Your new MultiSync monitor box* should contain the following:
•LCD monitor
•Power Cord*
1
•Video Signal Cable
•Setup Manual
•Wireless Remote Control and AAA Batteries
•Main switch cover•Clamp x 2
•Screw for clamp (M4 x 8) x 2
•Screw for main switch cover (3 x 10) x 2
•CD-ROM
•Thumbscrew for stand x 2 (LCD4215 only)
CD-ROMScrew for clamp
(M4 x 8) x 2...

English-5
EnglishThis device cannot be used or installed without the Tabletop
Stand or other mounting accessory for support. For proper
installation it is strongly recommended to use a trained,
NEC authorized service person. Failure to follow NEC
standard mounting procedures could result in damage to the
equipment or injury to the user or installer. Product warranty
does not cover damage caused by improper installation.
Failure to follow these recommendations could result in
voiding the warranty....

English-6
Attaching Mounting Accessories
The display is designed for use with the VESA mounting
system.
1. Attach Mounting Accessories
Be careful to avoid tipping monitor when attaching
accessories.
Mounting accessories can be attached with the monitor in
the face down position. To avoid damaging the screen face,
place the protective sheet on the table underneath the LCD.
The protective sheet was wrapped around the LCD in the
original packaging. Make sure there is nothing on the table
that can damage the...

English-7
English
7 DOWN () button
Activates the OSD menu when the OSD menu is turned-off.
Acts as 
 button to move the highlighted area down to
select adjustment items within OSD menu.
8 EXIT button
Activates the OSD menu when the OSD menu is turned-off.
Acts as EXIT button within the OSD to move to previous
menu.
9 Remote control sensor and Power Indicator
Receives the signal from the remote control (when using the
wireless remote control). See also page 9.
Glows green when the LCD monitor is in active...

English-8
Terminal Panel
8 AUDIO OUT
To output the audio signal from the AUDIO IN 1, 2 and 3
jack to an external device (stereo receiver, amplifier, etc.).
9 VIDEO INPUT/OUTPUT Connector
VIDEO IN connector (BNC and RCA): To input a
composite video signal. BNC and RCA connectors are not
available at the same time (Use only one input).
VIDEO OUT connector (BNC): To output the composite
video signal from the VIDEO IN connector.
VIDEO(S) IN connector (Mini DIN 4 pin): To input the
VIDEO(S) (Y/C separate...