NEC Multisync Lcd1770nx Users Manual
Here you can view all the pages of manual NEC Multisync Lcd1770nx Users Manual. The NEC manuals for Monitor are available online for free. You can easily download all the documents as PDF.
Page 2
Index Warning, Caution ......................................................................................................................... English-1 Declaration ................................................................................................................................... English-1 Canadian Department of Communications Compliance Statement ............................................ English-2 Declaration of Conformity...
Page 3
English English-1 WARNING CAUTION CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT THE POWER CORD FROM THE AC OUTLET.DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol warns user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Therefore, it is dangerous to make any kind of...
Page 4
English-2 Canadian Department of Communications Compliance Statement DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to CAN/CSA C22.2 No. 60950-1. FCC Information 1.Use the attached specified cables with the MultiSync LCD1770NX (L174F) colour monitor so as not to interfere with radio and television reception. (1) The power supply cord you use...
Page 5
English English-3 MultiSync LCD1770NX Contents Your new NEC MultiSync LCD monitor box* should contain the following: •MultiSync LCD1770NX monitor with tilt/swivel/pivot/height adjust stand •Power Cord •Video Signal Cable •User’s Manual •Cable Cover •CD ROM (includes complete User’s Manual in PDF format). To see the User’s Manual, Acrobat Reader 4.0 must be installed on your PC. * Remember to save your original box and packing material to transport or ship the monitor. Power Cord User’s Manual 15-pin mini...
Page 6
English-4 Quick Start To attach the MultiSync LCD monitor to your system, follow these instructions: 1. Turn off the power to your computer. 2.For the PC or MAC with DVI digital output: Connect the DVI signal cable (not included) to the connector of the display card in your system (Figure A.1). Tighten all screws. For the PC with Analog output: Connect the 15-pin mini D-SUB signal cable to the connector of the display card in your system (Figure A.2). Tighten all screws. For the MAC: Connect the...
Page 7
English English-5 Insert Top First Then Bottom 6. Place DVI cable and power cable into the specific hooks indicated in Figure C.3. 7. Place the D-Sub into the specific hooks indicated in Figure C.4. 8. Make sure all cables are resting flat against the stand (Figure C.4). 9. Hold the all cables firmly and place the cable cover onto the stand (Figure D.1). To remove the cable cover, lift the cover off as shown in Figure D.2. 10. Connect the power cord to the power outlet (Figure E.1). NOTE:Please refer to...
Page 8
English-6 Figure S.1 Remove Monitor Stand for Mounting To prepare the monitor for alternate mounting purposes: 1. Place hands on each side of the monitor and lift up to the highest position. Remove the cable cover (Figure S.1). 2. Disconnect all cables. 3. Place monitor face down on a non-abrasive surface (Figure S.2). 4. Remove the 2 screws connecting the stand to the monitor (Figure S.2). Figure RL.1 Raise and Lower Monitor Screen The monitor may be raised or lowered. To raise or lower screen, place...
Page 9
English English-7 Figure S.3 Figure S.4 5. Lift up the stand to unlatch the upper hooks and remove the stand (Figure S.3). 6. Remove the 2 screws on the top of the monitor (Figure S.4). The monitor is now ready for mounting in an alternate manner. 7. Connect the cables to the back of the monitor. 8. Reverse this process to re-attach stand. NOTE:Use only VESA-compatible alternative mounting method. Handle with care when removing stand. Flexible Arm Installation This LCD monitor is designed for use with a...
Page 10
English-8 Menu Exits the OSM controls. Exits to the OSM main menu. Moves the highlighted area left/right to select control menus. Moves the bar left/right to increase or decrease the adjustment. Moves the highlighted area down/up to select one of the controls. Active Auto Adjust function. Enter the OSM sub menu. Resets the highlighted control menu to the factory setting. Button MENU/EXIT Left/Right Down/Up SELECT RESET Controls OSM (On-Screen Manager) control buttons on the front of the monitor function...