NEC Multisync Ea232wmi Users Manual
Here you can view all the pages of manual NEC Multisync Ea232wmi Users Manual. The NEC manuals for Monitor are available online for free. You can easily download all the documents as PDF.
Page 1
MultiSync EA232WMi User’s Manual
Page 2
![Page 2
Index
Warning, Caution ........................................................................\
................................................. English-1
Registration Information ........................................................................\
............................... ........ English-1
Recommended use ........................................................................\
........................................ ...... English-3
Contents...](http://img.usermanuals.tech/thumb/54/52256/w300_nec_multisync_ea232wmi-user-s-manual-1.png "Page 2
Index
Warning, Caution ........................................................................\
................................................. English-1
Registration Information ........................................................................\
............................... ........ English-1
Recommended use ........................................................................\
........................................ ...... English-3
Contents...")
Index Warning, Caution ........................................................................\ ................................................. English-1 Registration Information ........................................................................\ ............................... ........ English-1 Recommended use ........................................................................\ ........................................ ...... English-3 Contents...
Page 3
![Page 3
English
English-1
WARNING
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROMWALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT THE
POWER CORD FROM THE AC OUTLET. DO NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol warns user that uninsulated voltage within the unit may have\
sufficient magnitude to cause
electric shock. Therefore, it is dangerous to make any kind of...](http://img.usermanuals.tech/thumb/54/52256/w300_nec_multisync_ea232wmi-user-s-manual-2.png "Page 3
English
English-1
WARNING
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROMWALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT THE
POWER CORD FROM THE AC OUTLET. DO NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol warns user that uninsulated voltage within the unit may have\
sufficient magnitude to cause
electric shock. Therefore, it is dangerous to make any kind of...")
English English-1 WARNING CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROMWALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT THE POWER CORD FROM THE AC OUTLET. DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol warns user that uninsulated voltage within the unit may have\ sufficient magnitude to cause electric shock. Therefore, it is dangerous to make any kind of...
Page 4
![Page 4
English-2
Canadian Department of Communications Compliance Statement
DOC: This Class B digital apparatus meets all requirements of the Canadian In\
terference-Causing Equipment Regulations.
C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulatio\
ns according to CAN/CSA C22.2 No. 60950-1.
FCC Information
1. Use the attached specified cables with the MultiSync EA232WMi (L230U1)\
color monitor so as not to interfere with radio
and television reception.
(1) The power supply cord you...](http://img.usermanuals.tech/thumb/54/52256/w300_nec_multisync_ea232wmi-user-s-manual-3.png "Page 4
English-2
Canadian Department of Communications Compliance Statement
DOC: This Class B digital apparatus meets all requirements of the Canadian In\
terference-Causing Equipment Regulations.
C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulatio\
ns according to CAN/CSA C22.2 No. 60950-1.
FCC Information
1. Use the attached specified cables with the MultiSync EA232WMi (L230U1)\
color monitor so as not to interfere with radio
and television reception.
(1) The power supply cord you...")
English-2 Canadian Department of Communications Compliance Statement DOC: This Class B digital apparatus meets all requirements of the Canadian In\ terference-Causing Equipment Regulations. C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulatio\ ns according to CAN/CSA C22.2 No. 60950-1. FCC Information 1. Use the attached specified cables with the MultiSync EA232WMi (L230U1)\ color monitor so as not to interfere with radio and television reception. (1) The power supply cord you...
Page 5
![Page 5
English
English-3
Recommended use
Safety Precautions and MaintenanceFOR OPTIMUM PERFORMANCE, PLEASE NOTE
THE FOLLOWING WHEN SETTING UP AND USING THE MULTISYNC LCD COLOUR MONITOR:
• DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing cover\
s may expose
you to dangerous shock hazards or other risks. Refer all servicing to qu\
alified service personnel.
• Do not spill any liquids into the cabinet or use your monitor near water\
.
• Do not insert objects of any kind...](http://img.usermanuals.tech/thumb/54/52256/w300_nec_multisync_ea232wmi-user-s-manual-4.png "Page 5
English
English-3
Recommended use
Safety Precautions and MaintenanceFOR OPTIMUM PERFORMANCE, PLEASE NOTE
THE FOLLOWING WHEN SETTING UP AND USING THE MULTISYNC LCD COLOUR MONITOR:
• DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing cover\
s may expose
you to dangerous shock hazards or other risks. Refer all servicing to qu\
alified service personnel.
• Do not spill any liquids into the cabinet or use your monitor near water\
.
• Do not insert objects of any kind...")
English English-3 Recommended use Safety Precautions and MaintenanceFOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE MULTISYNC LCD COLOUR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing cover\ s may expose you to dangerous shock hazards or other risks. Refer all servicing to qu\ alified service personnel. • Do not spill any liquids into the cabinet or use your monitor near water\ . • Do not insert objects of any kind...
Page 6
![Page 6
English-4
CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CANREDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR:
• For optimum performance, allow 20 minutes for warm-up.
• Adjust the monitor height so that the top of the screen is at or slightl\
y below eye level. Your eyes should look slightly downward when viewing the middle of the sc\
reen.
• Position your monitor no closer than 40 cm and no further away than 70 c\
m from your eyes. The optimal distance is 50...](http://img.usermanuals.tech/thumb/54/52256/w300_nec_multisync_ea232wmi-user-s-manual-5.png "Page 6
English-4
CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CANREDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR:
• For optimum performance, allow 20 minutes for warm-up.
• Adjust the monitor height so that the top of the screen is at or slightl\
y below eye level. Your eyes should look slightly downward when viewing the middle of the sc\
reen.
• Position your monitor no closer than 40 cm and no further away than 70 c\
m from your eyes. The optimal distance is 50...")
English-4 CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CANREDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: • For optimum performance, allow 20 minutes for warm-up. • Adjust the monitor height so that the top of the screen is at or slightl\ y below eye level. Your eyes should look slightly downward when viewing the middle of the sc\ reen. • Position your monitor no closer than 40 cm and no further away than 70 c\ m from your eyes. The optimal distance is 50...
Page 7
English English-5 Contents Your new NEC MultiSync LCD monitor box* should contain the following: • MultiSync LCD monitor with tilt/swivel/pivot/height adjust stand • Power Cord • Cable cover • Video Signal Cable (15-pin mini D-SUB male to 15-pin mini D-SUB male) • Video Signal Cable (DVI-D to DVI-D) • USB Cable • Audio Cable • Setup Manual Power Cord (Type of power cord included will depend on the where the LCD monitor is to be shipped) Setup Manual 15-pin mini D-SUB male to 15-pin mini D-SUB male DVI-D...
Page 8
![Page 8
English-6
Quick Start
To attach the MultiSync LCD monitor to your computer system, follow these\
instructions:
1. Turn off the power to your computer.
2.For PC or MAC with DVI digital output: Connect the DVI signal cable to the connector of the display card in yo\
ur system
( Figure A.1 ). Tighten all screws.
For PC with Analog output: Connect the 15-pin mini D-SUB signal cable to the connector of the disp\
lay card in your
system ( Figure A.2 ). Tighten all screws.
For MAC: Connect the Macintosh...](http://img.usermanuals.tech/thumb/54/52256/w300_nec_multisync_ea232wmi-user-s-manual-7.png "Page 8
English-6
Quick Start
To attach the MultiSync LCD monitor to your computer system, follow these\
instructions:
1. Turn off the power to your computer.
2.For PC or MAC with DVI digital output: Connect the DVI signal cable to the connector of the display card in yo\
ur system
( Figure A.1 ). Tighten all screws.
For PC with Analog output: Connect the 15-pin mini D-SUB signal cable to the connector of the disp\
lay card in your
system ( Figure A.2 ). Tighten all screws.
For MAC: Connect the Macintosh...")
English-6 Quick Start To attach the MultiSync LCD monitor to your computer system, follow these\ instructions: 1. Turn off the power to your computer. 2.For PC or MAC with DVI digital output: Connect the DVI signal cable to the connector of the display card in yo\ ur system ( Figure A.1 ). Tighten all screws. For PC with Analog output: Connect the 15-pin mini D-SUB signal cable to the connector of the disp\ lay card in your system ( Figure A.2 ). Tighten all screws. For MAC: Connect the Macintosh...
Page 9
![Page 9
English
English-7
Figure C.2
5. To keep the cables neatly organized, place them into the cable management\
system that is built into the stand.Place the Power cord and DVI cables into the specific hooks, as indicate\
d in Figure C.2/Figure C.3.
Place the D-Sub and the USB cables into the specific hooks, as indicated\
in Figure C.2/Figure C.3.
6. Make sure all cables are resting flat against the stand ( Figure C.2/Figure C.3).
Please check Tilt, Rise and Lower monitor screen and screen rotation when...](http://img.usermanuals.tech/thumb/54/52256/w300_nec_multisync_ea232wmi-user-s-manual-8.png "Page 9
English
English-7
Figure C.2
5. To keep the cables neatly organized, place them into the cable management\
system that is built into the stand.Place the Power cord and DVI cables into the specific hooks, as indicate\
d in Figure C.2/Figure C.3.
Place the D-Sub and the USB cables into the specific hooks, as indicated\
in Figure C.2/Figure C.3.
6. Make sure all cables are resting flat against the stand ( Figure C.2/Figure C.3).
Please check Tilt, Rise and Lower monitor screen and screen rotation when...")
English English-7 Figure C.2 5. To keep the cables neatly organized, place them into the cable management\ system that is built into the stand.Place the Power cord and DVI cables into the specific hooks, as indicate\ d in Figure C.2/Figure C.3. Place the D-Sub and the USB cables into the specific hooks, as indicated\ in Figure C.2/Figure C.3. 6. Make sure all cables are resting flat against the stand ( Figure C.2/Figure C.3). Please check Tilt, Rise and Lower monitor screen and screen rotation when...
Page 10
![Page 10
English-8
8. Connect the power cord to the power outlet (Figure E.1).
NOTE: Please refer to Caution section of this manual for proper selection of AC power cord.
9. Turn on the monitor with the front power button and the computer ( Figure E.1).
10. No-Touch Auto Adjust automatically adjusts the monitor to optimal settings upon initia\
l setup for most timings. For further adjustments, use the following OSD controls:
• Auto Adjust Contrast (Analog input only)
• Auto Adjust (Analog input only)
Refer to...](http://img.usermanuals.tech/thumb/54/52256/w300_nec_multisync_ea232wmi-user-s-manual-9.png "Page 10
English-8
8. Connect the power cord to the power outlet (Figure E.1).
NOTE: Please refer to Caution section of this manual for proper selection of AC power cord.
9. Turn on the monitor with the front power button and the computer ( Figure E.1).
10. No-Touch Auto Adjust automatically adjusts the monitor to optimal settings upon initia\
l setup for most timings. For further adjustments, use the following OSD controls:
• Auto Adjust Contrast (Analog input only)
• Auto Adjust (Analog input only)
Refer to...")
English-8 8. Connect the power cord to the power outlet (Figure E.1). NOTE: Please refer to Caution section of this manual for proper selection of AC power cord. 9. Turn on the monitor with the front power button and the computer ( Figure E.1). 10. No-Touch Auto Adjust automatically adjusts the monitor to optimal settings upon initia\ l setup for most timings. For further adjustments, use the following OSD controls: • Auto Adjust Contrast (Analog input only) • Auto Adjust (Analog input only) Refer to...