NEC Multisync Ea192m Users Manual

							
English
English-9
7. Reverse this process to re-attach stand.
NOTE:Use only VESA-compatible alternative mounting method.
Handle with care when removing stand.
NOTE: Match “TOP SIDE” mark on stand to top side of the monitor head when
re-attaching stand.
Flexible Arm Installation
This LCD monitor is designed for use with a flexible arm. To mount the monitor to a flexible arm:
1. Follow the instructions on how Remove Monitor Stand for Mounting to remo\
ve the stand.
2. Using the 4 screws from the stand removal, attach the arm to the monitor\
 ( Figure F.1).
NOTE: 1. When mounting, use ONLY the screws (4 pcs) that were removed from the stand to avoid damage t\
o the monitor
or stand.
2. The LCD monitor should only be used with an approved arm (e.g. GS mark)\
. To meet the safety requirements,
the monitor must be mounted to an arm, which guaranties the necessary st\
ability under consideration of the weight
of the monitor.
3.The mounting stand must be able to sustain at least 14 kg and be UL ce\
rtified.
“TOP SIDE” mark
Please match top side of the monitor
Thickness of Bracket (Arm) 2.0~3.2 mm
Weight of LCD assembly: 3.5 kg MAX
100 mm
100 mm
Figure F.1
4 Screws (M4)
(Max Depth: 14 mm)
 
						

							
English-10
Controls
OSD (On-Screen Display) control buttons on the front of the monitor fu\
nction
as follows:
To access OSD menu, press any of the control buttons (MENU, Left, Right,\
 Down, Up).
To change signal input, press the SELECT button.
To change ECO MODE, press the RESET/ECO MODE button.
NOTE:OSD must be closed in order to change signal input.
NOTE: When RESET  is pressed in the main and sub-menu, a warning window will appear allow\
ing you to cancel the
RESET  function by pressing the MENU button.
Brightness/Contrast Controls
BRIGHTNESS
Adjusts the overall image and background screen brightness.
If ECO MODE is set to ON, a bar for CARBON FOOTPRINT will appear.
CONTRAST
Adjusts the image brightness in relation to the background.
AUTO CONTRAST (Analog input only)
Adjusts the image displayed to optimal settings.
ECO MODE
Decreases the amount of power consumed by reducing the brightness level.\
OFF: Set brightness variable from 0% to 100%.
(ECO MODE) 1:  Set brightness variable range from 0% to 80%.
This setting can adjust brightness within the range that power has reduc\
ed meeting Energy Star measurement
condition.
(ECO MODE) 2:  Set brightness variable range from 0% to 30%.
This setting can adjust brightness within the range that power has reduc\
ed 30% from maximum brightness setting.
When this function is set to ON, a bar for CARBON FOOTPRINT appear under the brightness adjustment bar.
NOTE:  This function can’t work when DV mode is set for Dynamic.
Menu
Detects the level of ambient lighting allowing the monitor to make adjus\
tments to various settings
resulting in a more comfortable viewing experience. Do not cover this se\
nsor.
Open OSD main menu.
Exits the OSD controls.
Exits to the OSD main menu.
Moves the highlighted area left/right to select control menus.
Moves the bar left/right to increase or decrease the adjustment.
Direct adjust of BRIGHTNESS if HOT KEY is set to ON.
Enters the OSD menu if HOT KEY is set to OFF.
Moves the highlighted area down/up to select one of the controls.
Direct adjust of CONTRAST if HOT KEY is set to ON.
Enters the OSD menu if HOT KEY is set to OFF.
Enter the OSD sub menu. Active the selected function.
Change the Input source (No OSD condition).
Resets the highlighted control menu to the factory setting. Switches the\
 ECO MODE.
Activates Auto Adjust function if pushed for 3 seconds (No OSD condition and Analog input only).
Turns the monitor on and off.
Button
1 Ambibright Sensor
2 MENU
3 4-Direction-Key Left/Right
Down/Up
4  SELECT
5 RESET/ECO MODE
6 Power
Up
Down Right
Left
 
						

							
English
English-11
AUTO BRIGHTNESS
OFF: No function.
(AUTO BRIGHTNESS)  1:  Automatically adjusts the brightness to the optimal setting by detecting\
 the brightness
level of the environment*
1.
(AUTO BRIGHTNESS)  2:  Automatically adjusts the brightness to the optimal brightness setting b\
ased on the white
display area.
The environmental brightness sensor (Ambibright sensor) has no functio\
n.
(AUTO BRIGHTNESS)  3:  Automatically adjusts the brightness to the optimal setting based on the\
 white display area
and by using the AmbiBright sensor to detect the brightness level of the environment.
*1: Please refer to Page 17 for full “Auto Brightness” information\
.
NOTE: This function is disabled when DV mode is set for Dynamic.
DV MODE
Dynamic Visual Mode allows you to select setting for Movie, Photo, Dynamic and et\
c.
STANDARD:  Standard setting.
TEXT:  Setting that makes letters and lines crisp, best suited for regular word\
 processing and spread sheet.
MOVIE:  Setting that boosts dark tones, best suited for movies.
GAMING:  Setting that boosts whole tones, best suited for games that provide imag\
es with more power.
PHOTO:  Setting that gives contrast, best suited for natural images and still im\
ages.
DYNAMIC:  Setting that makes brightness dark by detecting black area. It gives hig\
h contrast.
Auto Adjust (Analog input only)
Automatically adjusts the Image Position, H. Size and Fine settings.
Image Controls (Analog input only)
LEFT / RIGHT
Controls Horizontal Image Position within the display area of the LCD.
DOWN / UP
Controls Vertical Image Position within the display area of the LCD.
H.SIZE
Adjusts the horizontal size by increasing or decreasing this setting.
FINE
Improves focus, clarity and image stability by increasing or decreasing \
this setting.
Colour Control System
Colour Control System:  Six colour presets select the desired colour setting (sRGB and NATIVE colour presets are
standard and cannot be changed).
1, 2, 3, 5:  Increases or decreases Red, Green or Blue colour depending upon which i\
s selected. The change in
colour will appear on screen and the direction (increase or decrease) \
will be shown by the bars.
NATIVE:  Original colour presented by the LCD panel that is unadjustable.
sRGB:  sRGB mode dramatically improves the colour fidelity in the desktop envir\
onment by a single standard RGB
colour space. With this colour supported environment, the operator could\
 easily and confidently communicate colour
without further colour management overhead in the most common situations\
.
NOTE:  When MOVIE, GAMING, or PHOTO is selected as the DV MODE, NATIVE is selected automatically as the
six colour preset and cannot be changed.
 
						

							
English-12
Tools
VOLUME: Controls the volume of the speakers or headphones.
To mute the speaker output, press the “RESET/ECO MODE” button.
SOUND INPUT (DisplayPort only):  This function selects Audio Input or DisplayPort.
VIDEO DETECT:  Selects the method of video detection when more than one computer is con\
nected.
FIRST:  The video input has to be switched to “FIRST” mode. When current v\
ideo input signal is not present,
then the monitor searches for a video signal from the other video input \
port. If the video signal is present in the
other port, then the monitor switches the video source input port to the\
 new found video source automatically.
The monitor will not look for other video signals while the current vide\
o source is present.
NONE:  The Monitor will not search the other video input port unless the monito\
r is turned on.
OFF TIMER:  Monitor will automatically power-down when the end user has selected a \
predetermined amount of
time.
LED BRIGHTNESS:  You can adjust the Blue LED brightness.
DDC/CI:  This function allows the DDC/CI function ON or OFF.
FACTORY PRESET:  Selecting Factory Preset allows you to reset all OSD control settings b\
ack to the factory
settings. Individual settings can be reset by pressing the RESET/ECO MOD\
E button.
Menu Tools
LANGUAGE:  OSD control menus are available in eight languages.
OSD LEFT/RIGHT:  You can choose where you would like the OSD control image to appear horiz\
ontally on your
screen.
OSD DOWN/UP:  You can choose where you would like the OSD control image to appear verti\
cally on your screen.
OSD TURN OFF:  The OSD control menu will stay on as long as it is in use. In the OSD Turn Off submenu, you can
select how long the monitor waits after the last touch of a button to sh\
ut off the OSD control menu.
OSD LOCK OUT:  This control completely locks out access to all OSD control functions wi\
thout Brightness and
Contrast. When attempting to activate OSD controls while in the Lock Out\
 mode, a screen will appear indicating the
OSD controls are locked out. To activate the OSD Lock Out function, press SELECT, then right control button and
hold down simultaneously. To deactivate the OSD Lock Out, press SELECT, then left control button and hold down
simultaneously while in the OSD menu.
HOT KEY:  You can adjust the brightness and contrast directly. When this function is set to ON, you can adjust the
brightness with left or right control and contrast with up or down contr\
ol while the OSD menu is off.
SIGNAL INFORMATION:  If you select “ON”, monitor displays “VIDEO INPUT MENU” after change Input-Port.
If you select “OFF”, monitor doesn’t display “VIDEO INPUT ME\
NU” after change Input-Port.
IPM SETTING:  The Intelligent Power Manager allows the monitor to enter into a power s\
aving mode after a period of
inactivity. The IPM has two settings: STANDARD:  Monitor enters power save mode automatically when the input signal is l\
ost.
SENSOR:  Monitor enters power save mode automatically when the amount of surroun\
ding light goes below the
level determined by you. The level can be adjusted in IPM sensor setting.
When in power save mode, the LED on the front of the monitor becomes dar\
k blue. When in power save mode,
push any of the front buttons, except for POWER and SELECT, to return to normal.
When the amount of surrounding light returns to normal levels, the monit\
or will automatically return to normal mode.
IPM SENSOR SETTING:  Adjusts threshold level of sensor for detected dark condition and shows \
current sensor
measurement result below.
 
						

							
English
English-13
ECO Information
CARBON SAVINGS: Displays the estimated carbon savings information in kg.
COST:  Displays the electricity cost savings in balance.
CARBON CONVERT SETTING:  Adjusts the carbon footprint factor in the carbon saving calculation. This initial
setting is based on the OECD (2008 Edition).
CURRENCY SETTING:  Displays electricity pricing (available in 6 currency units).
CURRENCY CONVERT SETTING:  Allows for localization of the electricity costs for accurate informatio\
n in the
electrical rate savings.
NOTE: This model’s initial setting is Currency = US$ and its Currency Convert setting = $\
0.11.
This setting can be changed by using the ECO information menu.
If you want to use the French setting, please refer to steps below:
1. Open menu by pressing the Menu button and select the ECO information men\
u using the left or right key.
2. Select Currency setting item pressing the Up or Down key.
3. The French currency unit is Euro (
). You can adjust currency setting to Euro icon () from US dollar
icon ($) using the Left or Right key in Current setting item.
4. Select Currency Convert Setting item using the Up or Down key*.
5. Adjust Currency Convert Setting item using the Right or Left key.
* This initial Euro (
) setting is Germany of OECD (2007 Edition).
Please check receipt of French’s electricity prices or OECD data for French.
French of OECD (2007 Edition) was 
0.12.
Information
The Information menu indicates the current input, display resolution, ho\
rizontal and vertical frequency, and polarity
settings of the monitor. The model and serial numbers of your monitor are also indicated.
OSD Warning
OSD Warning menus disappear with Exit button.
NO SIGNAL:  This function gives a warning when there is no Horizontal or Vertical Sync. After power is
turned on or when there is a change of input signal, the  No Signal window will appear.
OUT OF RANGE:  When input signal is non-supported timing or the video signal doesn’\
t have proper
timing, the  Out of Range  menu will appear.
 
						

							
English-14
Specifications
Monitor Specifications MultiSync EA192M Notes
LCD Module Diagonal: 48.2 cm/19.0 inches Active matrix; thin film transistor (TFT) liquidViewable Image Size: 48.2 cm/19.0 inches crystal display (LCD); 0.294 mm dot pitch;
Native Resolution (Pixel Count): 1280 x 1024 250 cd/m
2 white luminence; 1000:1 contrast ratio,
typical (25000:1 Contrast ratio, Dynamic).
Input Signal
DVI: DVI-D 24pin: Digital RGB DVI-D with HDCP
DisplayPort: DisplayPort Connector: Digital RGB DisplayPort Complies with Standard V1.1a,
applicable to HDCP
VGA: 15pin Mini D-sub: Analog RGB 0.7 Vp-p/75 ohm Separate sync.TTL level Positive/Negative
Composite sync.TTL level Positive/Negative
Sync on Green
(Video 0.7 Vp-p and Sync Negative 0.3 Vp-p)
Display Colours 16,777,216 Depends on display card used.
Synchronization Range Horizontal: 31.5 kHz to 81.1 kHz (Analog) Automatically
31.5 kHz to 81.1 kHz (Digital) Automatically
Vertical:56.0 Hz to 75.0 Hz Automatically
Viewing Angle Left/Right: ±85° (CR > 10)
Up/Down: 75°/85° (CR > 10)
Resolutions Supported 720 x 400*
1: VGA text Some systems may not support all modes listed.
640 x 480*1 @ 60 Hz to 75 Hz
800 x 600*1 @ 56 Hz to 75 Hz
832 x 624*1 @ 75 Hz
1024 x 768*1 @ 60 Hz to 75 Hz
1152 x 864*1 @ 75 Hz
1152 x 870*1 @ 75 Hz
1280 x 960*1 @ 60 Hz to 75 Hz NEC DISPLAY SOLUTIONS cites recommended1280 x 1024*1 @ 60 Hz to 75 Hz............ resolution for optimal display performance.
Active Landscape: Horiz.: 376.3 mm/14.8 inches
Display Area Vert.: 301.1 mm/11.9 inches Portrait: Horiz.: 301.1 mm/11.9 inches
Vert.: 376.3 mm/14.8 inches
AUDIO
AUDIO Input: STEREO Mini Jack: Analog Audio Stereo L/R 500mV rms
DisplayPort Connector: Digital Audio PCM 2ch 32, 44.1, 48 KHz (16/20/24bit)
Headphone Output: STEREO Mini Jack:Headphone Impedance 32 Ohm
Speakers Practical Audio Output: 1.0 W + 1.0 W
Power Supply AC 100-240 V ~ 50/60 Hz
Current Rating 0.60-0.35 A (with Audio)
Power Maximun Operation: 32 W
Consumption Normal Operation: 23 W
Dimensions Landscape: 408.0 mm (W) x 386.4 - 496.4 mm (H) x 213.9 mm (D) 16.1 inches (W) x 15.2 - 19.5 inches (H) x 8.4 inches (D)
Portrait: 338.0 mm (W) x 424.7 - 532.4 mm (H) x 213.9 mm (D) 13.3 inches (W) x 16.7 - 21.0 inches (H) x 8.4 inches (D)
Height Adjustment: 110 mm/4.3 inches (Landscape condition)
107.7 mm/4.2 inches (Portrait condition)
Weight 5.5 kg (12.1 lbs)
Environmental Considerations Operating Temperature: 5°C to 35°C/41°F to 95°FHumidity: 20% to 80%Altitude: 0 to 6,562 Feet/0 to 2,000 m
Storage Temperature: -10°C to 60°C/14°F to 140°F Humidity: 10% to 85%
Altitude: 0 to 40,000 Feet/0 to 12,192 m
*1 Interpolated Resolutions: When resolutions are shown that are lower t\
han the pixel count of the LCD module, text may appear  different. This is
normal and necessary for all current flat panel technologies when displa\
ying non-native resolutions full screen. In flat panel  technologies, each dot on
the screen is actually one pixel, so to expand resolutions to full scree\
n, an interpolation of the resolution must be done.
NOTE: Technical specifications are subject to change without notice.
 
						

							
English
English-15
Features
Thin-frame design creates more desktop space for you to work and play, while the flat screen’s crisp, bright images and crystal-
clear text deliver a comfortable viewing experience.
No Touch Auto Adjust  automatically adjusts your optimal image settings upon initial power-on.\
Colour Control System  allows you to change between six colour settings on your display to match your personal preference.
Redesigned OSD controls  allow you to quickly and easily adjust all elements of your screen image\
.
NaViSet software  offers an expanded and intuitive graphical interface, allowing you to more\
 easily adjust OSD display settings
via mouse and keyboard.
Height-adjustable (110 mm) stand with tilt, swivel, pivot and cable management  adds flexibility to your viewing preferences.
The flat screen’s crisp, bright images and crystal-clear text  deliver a comfortable viewing experience.
ErgoDesign Features:  Enhance human ergonomics to improve the working environment, protect the\
 health of the user and
save money. Examples include OSD controls for quick and easy image adjustments, ti\
lt base for preferred angle of vision, small
footprint and compliance with MPRII and TCO guidelines for lower emissions.
Plug and Play:  The Microsoft
® solution with the Windows® operating system facilitates setup and installation by allowing the
monitor to send its capabilities (such as screen size and resolutions s\
upported) directly to your computer, automatically
optimizing display performance.
IPM (Intelligent Power Manager) System:  Provides innovative power-saving methods that allow the monitor to shift\
 to a lower
power consumption level when on but not in use, saving two-thirds of you\
r monitor energy costs, reducing emissions and
lowering the air conditioning costs of the workplace.
Multiple Frequency Technology:  Automatically adjusts monitor to the display card’s scanning frequency, thus displaying the
resolution required.
FullScan Capability:  Allows you to use the entire screen area in most resolutions, significan\
tly expanding image size.
VESA Standard Mounting Interface:  Allows users to connect their MultiSync monitor to any VESA standard third party
mounting arm or bracket. Allows for the monitor to be mounted on a wall or an arm using any third\
 party compliant device.
Environmental Impact:  Annual typical maximum operating carbon footprint of this monitor (worl\
d-wide average) is
approximately 29.5 kg (calculated by: rated wattage x 8 hours per day x\
 5 days a week x 45 weeks per year x Power-to-
Carbon conversion factor - conversion factor is based on OECD publicatio\
n of global CO2 emissions 2008 Edition).
This monitor has a manufacturing carbon footprint of approximately 30 kg\
.
Note:  The manufacturing and operating carbon footprints are calculated by a un\
ique algorithm developed exclusively by NEC
for its monitors.
 
						

							
English-16
Troubleshooting
No picture• The signal cable should be completely connected to the display card/comp\
uter.
• The display card should be completely seated in its slot.
• Front Power Switch and computer power switch should be in the ON positio\
n.
• Check to make sure that a supported mode has been selected on the displa\
y card or system being used.(Please consult display card or system manual to change graphics mode.)\
• Check the monitor and your display card with respect to compatibility an\
d recommended settings.
• Check the signal cable connector for bent or pushed-in pins.
• If the front LED is dark blue, check the status of the IPM mode (see pa\
ge 12).
Power Button does not respond • Unplug the power cord of the monitor from the AC outlet to turn off and reset the monitor.
Image Persistence • Please be aware that LCD Technology may experience a phenomenon known as Image Persistence. ImagePersistence occurs when a residual or “ghost” image of a previous \
image remains visible on the screen. Unlike CRT
monitors, LCD monitors’ image persistence is not permanent, but constant images being displayed\
 for a long period of
time should be avoided. To alleviate image persistence, turn off the monitor for as long as the previous image was
displayed. For example, if an image was on the monitor for one hour and \
a residual image remains, the monitor should
be turned off for one hour to erase the image.
NOTE: As with all personal display devices, NEC DISPLAY SOLUTIONS recommends displaying moving images and using
a moving screen saver at regular intervals whenever the screen is idle o\
r turning off the monitor when not in use.
Message “OUT OF RANGE” is displayed (screen is either blank or sh\
ows rough images only) • Image is displayed only roughly (pixels are missing) and OSD warning “\
OUT OF RANGE” is displayed: Either signalclock or resolution is too high. Choose one of the supported modes.
• OSD warning “OUT OF RANGE” is displayed on a blank screen: Signal \
frequency is out of range. Choose one of the supported modes.
Image is unstable, unfocused or swimming is apparent • Signal cable should be completely attached to the computer.
• Use the OSD Image Adjust controls to focus and adjust display by increasing or decreasing \
the fine total. When thedisplay mode is changed, the OSD Image Adjust settings may need to be re-adjusted.
• Check the monitor and your display card with respect to compatibility an\
d recommended signal timings.
• If your text is garbled, change the video mode to non-interlace and use \
60Hz refresh rate.
LED on monitor is not lit (no blue or amber colour can be seen) • Power Switch should be in the ON position and power cord should be conne\
cted.
Picture is not as bright • Make sure ECO MODE is turned off.
• If the brightness fluctuates make sure AUTO BRIGHTNESS is turned off.
Display image is not sized properly • Use the OSD Image Adjust controls to increase or decrease the H. SIZE.
• Check to make sure that a supported mode has been selected on the displa\
y card or system being used.(Please consult display card or system manual to change graphics mode.)\
No Video • Make certain the computer is not in a power-saving mode (touch the keyb\
oard or mouse).
• Some video cards do not output video signal when monitor is turned OFF/O\
N or disconnect/connect from the ACpower cord under low resolution with DisplayPort.
No Sound • Make sure the speaker cable is proper connected.
• Check to see if mute is activated.
• Check the volume in the OSD menu.
Brightness difference during multiple monitor usage • Change Auto Brightness to OFF and adjust brightness.
NOTE: When Auto Brightness is set to ON, the monitor automatically adjusts brightne\
ss to the environment.
When condition is difference, monitor brightness will be difference.
 
						

							
English
English-17
Using the Auto Brightness function
The brightness of the LCD screen can be set to increase or decrease depe\
nding on the amount of ambient light within the
room. If the room is bright, the monitor becomes correspondingly bright.\
 If the room is dim, then the monitor will dim
accordingly. The purpose of this function is to make the viewing experience more comf\
ortable to the eye in a variety of lighting
conditions.
The Auto Brightness function is set to 1 by default.
SETUP
Use the following procedure to select the Brightness Range that the moni\
tor will use when the Auto Brightness function is
activated.
1. Set the BRIGHT level. This is the brightness level that the monitor will go up to when the amb\
ient light level is highest. Make sure the room is at its brightest when setting this level.
Select “1” or “3” in the AUTO BRIGHTNESS menu ( Figure 1). Then use the front buttons to move the cursor up to the
BRIGHTNESS setting. Choose the desired brightness level ( Figure 2).
2. Set the DARK level. This is the level of brightness that the monitor will go down to when th\
e ambient light level is low. Make sure the room is at its darkest when setting this level.
Then use the front buttons to move the cursor up to the BRIGHTNESS setti\
ng. Choose the desired brightness level
(Figure 3 ).
Figure 1 Figure 2
Figure 3
When the “Auto Brightness” function is enabled the Brightness leve\
l of the screen changes automatically according to the
lighting conditions of the room ( Figure 4).
 
BRIGHTNESS level set
for the monitor to use
when ambient lighting
level is low.
BRIGHTNESS level set for the
monitor to use when ambient
lighting level is high.
BRIGHTNESS range
Lb: Border between bright and dim lighting conditions; set at factory
L1: BRIGHTNESS level set for the monitor to use when ambient lighting le\
vel is high (L1>Lb)
L2: BRIGHTNESS level set for the monitor to use when ambient lighting le\
vel is low (L2
						

							
English-18
TCO Displays 5
Congratulations!
This display is designed for both you and the planet!The display you have just purchased carries the TCO
Certified label. This ensures that your display is designed,
manufactured and tested according to some of the strictest
quality and environmental requirements in the world.
This makes for a high performance product, designed with
the user in focus that also minimizes the impact on the
climate and our natural environment.
TCO Certified is a third party verified program, where every product mod\
el is tested by an
accredited impartial test laboratory. TCO Certified represents one of the toughest certifications
for displays worldwide.
Some of the Usability features of the TCO Certified for displays:
• Good visual ergonomics and image quality is tested to ensure top performance and reduc\
e sight and strain problems. Important parameters are luminance, contrast,\
 resolution, black level,
gamma curve, color and luminance uniformity, color rendition and image stability.
• Product have been tested according to rigorous safety standards at an im\
partial laboratory.
• Electric and magnetic fields emissions as low as normal household backgr\
ound levels.
• Low acoustic noise emissions.
Some of the Environmental features of the TCO Certified for displays:
• The brand owner demonstrates corporate social responsibility and has a c\
ertified environmental management system (EMAS or ISO 14001).
• Very low energy consumption both in on- and standby mode minimize climate impact.
• Restrictions on chlorinated and brominated flame retardants, plasticizer\
s, plastics and heavy metals such as cadmium, mercury and lead (RoHS compliance).
• Both product and product packaging is prepared for recycling.
• The brand owner offers take-back options.
The requirements can be downloaded from our web site. The requirements included in this
label have been developed by TCO Development in co-operation with scientists, experts,
users as well as manufacturers all over the world. Since the end of the \
1980s TCO has been
involved in influencing the development of IT equipment in a more user-friendly direction.
Our labeling system started with displays in 1992 and is now requested b\
y users and IT-
manufacturers all over the world. About 50% of all displays worldwide are TCO certified.
For more information, please visitwww.tcodevelopment.com