NEC Multisync E231w Users Manual

English
English-9
7. Reverse this process to re-attach stand.
NOTE:Use only VESA-compatible alternative mounting method.
Handle with care when removing stand.
NOTE: Match “TOP SIDE” mark on stand to top side of the monitor head when
re-attaching stand.
Flexible Arm Installation
This LCD monitor is designed for use with a flexible arm. To mount the monitor to a flexible arm:
1. Follow the instructions on how Remove Monitor Stand for Mounting to remo\
ve the stand.
2. Using the 4 screws from the stand...

English-10
Menu
Detects the level of ambient lighting allowing the monitor to make adjus\
tments to various settings
resulting in a more comfortable viewing experience. Do not cover this se\
nsor.
Open OSD main menu.
Exits the OSD controls.
Exits to the OSD main menu.
Moves the highlighted area left/right to select control menus.
Moves the bar left/right to increase or decrease the adjustment.
Direct adjust of BRIGHTNESS if HOT KEY is set to ON.
Enters the OSD menu if HOT KEY is set to OFF.
Moves the...

English
English-11
AUTO BRIGHTNESS
OFF: No function.
(AUTO BRIGHTNESS)  1:  Automatically adjusts the brightness to the optimal setting by detecting\
 the brightness
level of the environment*
1.
(AUTO BRIGHTNESS)  2:  Automatically adjusts the brightness to the optimal brightness setting b\
ased on the white
display area.
The environmental brightness sensor (Ambibright sensor) has no functio\
n.
(AUTO BRIGHTNESS)  3:  Automatically adjusts the brightness to the optimal setting based on the\
 white...

English-12
Tools
VIDEO DETECT: Selects the method of video detection when more than one computer is con\
nected.
FIRST:  The video input has to be switched to “FIRST” mode. When current v\
ideo input signal is not present,
then the monitor searches for a video signal from the other video input \
port. If the video signal is present in the
other port, then the monitor switches the video source input port to the\
 new found video source automatically.
The monitor will not look for other video signals...

English
English-13
ECO Information
CARBON SAVINGS: Displays the estimated carbon savings information in kg.
COST:  Displays the electricity cost savings in balance.
CARBON CONVERT SETTING:  Adjusts the carbon footprint factor in the carbon saving calculation. This initial
setting is based on the OECD (2008 Edition).
CURRENCY SETTING:  Displays electricity pricing (available in 6 currency units).
CURRENCY CONVERT SETTING:  Allows for localization of the electricity costs for accurate informatio\
n in...

English-14
Specifications
Monitor Specifications MultiSync E231W Notes
LCD Module Diagonal: 58.42 cm/23.0 inches Active matrix; thin film transistor (TFT) liquidViewable Image Size: 58.42 cm/23.0 inches crystal display (LCD); 0.265 mm dot pitch;
Native Resolution (Pixel Count): 1920 x 1080 250 cd/m
2 white luminance; 1000:1 contrast ratio,
typical (25000:1 Contrast ratio, Dynamic).
Input Signal
DVI: DVI-D 24pin: Digital RGB DVI (HDCP)
DisplayPort: DisplayPort Connector: Digital RGB DisplayPort Complies...

English
English-15
Features
Thin-frame design creates more desktop space for you to work and play, while the flat screen’s crisp, bright images and crystal-
clear text deliver a comfortable viewing experience.
No Touch Auto Adjust  automatically adjusts your optimal image settings upon initial power-on.\
Colour Control System:  Allow you to change between six colour settings on your display to match your personal preference.
Redesigned OSD controls  allow you to quickly and easily adjust all elements...

English-16
Troubleshooting
No picture• The signal cable should be completely connected to the display card/comp\
uter.
• The monitor does not support DisplayPort converter signal.
• The display card should be completely seated in its slot.
• Front Power Switch and computer power switch should be in the ON positio\
n.
• Check to make sure that a supported mode has been selected on the displa\
y card or system being used.(Please consult display card or system manual to change graphics mode.)\
• Check the...

English
English-17
Using the Auto Brightness function
The brightness of the LCD screen can be set to increase or decrease depe\
nding on the amount of ambient light within the
room. If the room is bright, the monitor becomes correspondingly bright.\
 If the room is dim, then the monitor will dim
accordingly. The purpose of this function is to make the viewing experience more comf\
ortable to the eye in a variety of lighting
conditions.
The Auto Brightness function is set to 1 by default.
SETUP
Use the...

English-18
TCO Displays 5
Congratulations!
This display is designed for both you and the planet!The display you have just purchased carries the TCO
Certified label. This ensures that your display is designed,
manufactured and tested according to some of the strictest
quality and environmental requirements in the world.
This makes for a high performance product, designed with
the user in focus that also minimizes the impact on the
climate and our natural environment.
TCO Certified is a third party...