NEC Multisync E221w Users Manual

English
English-9
Menu
Open OSD main menu.
Exits the OSD controls.
Exits to the OSD main menu.
Button
MENU
Controls
OSD (On-Screen Display) control buttons on the front of the monitor fu\
nction
as follows:
To access OSD menu, press any of the control buttons (MENU, Left, Right,\
 Down, Up).
To change signal input, press the SELECT button.
To change DV MODE, press the RESET/DV MODE button.
NOTE:OSD must be closed in order to change signal input.
NOTE: When RESET  is pressed in the main and sub-menu, a...

English-10
Image Controls (Analog input only)
LEFT / RIGHT
Controls Horizontal Image Position within the display area of the LCD.
DOWN / UP
Controls Vertical Image Position within the display area of the LCD.
H.SIZE
Adjusts the horizontal size by increasing or decreasing this setting.
FINE
Improves focus, clarity and image stability by increasing or decreasing \
this setting.
Colour Control System
Colour Control System: Six colour presets select the desired colour setting (sRGB and NATIVE colour presets...

English
English-11
Information
The Information menu indicates the current input, display resolution, ho\
rizontal and vertical frequency, and polarity
settings of the monitor. The model and serial numbers of your monitor are also indicated.
CARBON SAVINGS: Display the estimated carbon saving information in kg.
The carbon footprint factor in the carbon saving calculation is based on\
 the OECD (2006 Edition).
OSD Warning
OSD Warning menus disappear with Exit button.
NO SIGNAL:  This function gives a...

English-12
Specifications
Monitor Specifications MultiSync E221W Notes
LCD Module Diagonal: 55.9 cm/22.0 inches Active matrix; thin film transistor (TFT) liquidViewable Image Size: 55.9 cm/22.0 inches crystal display (LCD); 0.282 mm dot pitch;
Native Resolution (Pixel Count): 1680 x 1050 250 cd/m
2 white luminance; 1000:1 contrast ratio,
typical.
Input Signal Video: ANALOG 0.7 Vp-p/75 Ohms Digital Input: DVI-D with HDCP Sync: Separate sync.TTL LevelHorizontal sync. Positive/Negative
Vertical sync....

English
English-13
Features
Thin-frame design creates more desktop space for you to work and play, while the flat screen’s crisp, bright images and crystal-
clear text deliver a comfortable viewing experience.
No Touch Auto Adjust  automatically adjusts your optimal image settings upon initial power-on.\
Colour Control System  allows you to change between six colour settings on your display to match your personal preference.
Redesigned OSD controls  allow you to quickly and easily adjust all elements...

English-14
Troubleshooting
No picture• The signal cable should be completely connected to the display card/comp\
uter.
• The display card should be completely seated in its slot.
• Front Power Switch and computer power switch should be in the ON positio\
n.
• Check to make sure that a supported mode has been selected on the displa\
y card or system being used.(Please consult display card or system manual to change graphics mode.)\
• Check the monitor and your display card with respect to compatibility...

English
English-15
TCO’03Congratulations!
The display you have just purchased carries the TCO’03 Displays
label. This means that your display is designed, manufactured and
tested according to some of the strictest quality and environmental
requirements in the world. This makes for a high performance
product, designed with the user in focus that also minimizes the
impact on our natural environment.
Some of the features of the TCO’03 Display requirements:
Ergonomics • Good visual ergonomics and image...

English-16
NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees re\
cycling as one of the company’s
top priorities in trying to minimize the burden placed on the environmen\
t. We are engaged in developing environmentally-
friendly products, and always strive to help define and comply with the \
latest independent standards from agencies such as
ISO (International Organisation for Standardization) and TCO (Swedish Trades Union).
Disposing of your old NEC product
The aim of...