NEC Multeos M401 Users Manual

English-19
English
OSD (On-Screen-Display) Controls
Press UP or DOWN
button to select
sub-menu.Press SET. Press UP or DOWN,
PLUS or MINUS to select
the function or setting to
be adjusted. Press MENU or EXIT.
Remote Control
Press UP or DOWN
button to select. Press INPUT button
to decide.Press UP or DOWN, PLUS
or MINUS button to select. Press EXIT
Control Panel
OSD screen
PICTURE MODE
Goto Adjustment
S elect Return Close
70
50
50
50
50
50
THANK YOU FOR SAVING
                         THE ENVIRONMENT....

English-20
SettingDefault
BRIGHTNESS Adjusts the overall image and background brightness. Press + or - to adj\
ust. 70Note: When AMBIENT1 or AMBIENT2 is selected in picture mode, this function cannot changed.
CONTRAST Adjusts the image brightness in relationship to the background. Press + \
or - to adjust. 50
Note: The sRGB picture mode is standard and cannot be changed.
SHARPNESS Adjusts the crispness of the image. Press + or - to adjust. 50*2
BLACK LEVEL Adjusts the image brightness in relationship to...

English-21
English
H RESOLUTION Adjusts the horizontal size of the image. -VGA, RGB/HV inputs only
V RESOLUTION Adjusts the vertical size of the image. -VGA, RGB/HV inputs only
INPUT RESOLUTION If there is a problem with signal detection, this function forces the mo\
nitor to display the AUTOVGA, RGB/HV inputs onlysignal at the desired resolution. After selection, execute “AUTO SETUP” if required.
If no problem is detected, the only available option will be “AUTO”.
ZOOM MODE Select the aspect ratio of...

English-22
SCHEDULE RESET Resets the following settings within the SCHEDULE menu back to factory s\
etting: -OFF TIMER, SCHEDULE SETTINGS.
KEEP PIP MODE Allows the monitor to remain in “PIP” and “TEXT TICKER” mode after powering off. OFF
When Power is returned, PIP and TEXT TICKER appear without having to enter the OSD.
PIP MODE Picture-in-PictureOFF
OFF OFF
PIP PIP
POP POP
SIDE BY SIDE (ASPECT)SIDE BY SIDE ASPECT
SIDE BY SIDE (FULL) SIDE BY SIDE FULL
PIP SIZE Selects the size of the sub-picture used in...

English-23
English
OSD TRANSPARENCY Set the transparency level of the OSD. TYPE2
OFF
TYPE1
TYPE2
OSD ROTATION Determines the OSD display direction between landscape and portrait. LANDSCAPE
LANDSCAPE Display the OSD with landscape mode.
PORTRAIT Display the OSD with portrait mode.
INPUT NAME You can set currently displayed INPUT name as you like. -
Max: 8 characters, including Space, A-Z, 0-9, and some symbols.
CLOSED CAPTION Activates closed captioning. OFF
VIDEO1, VIDEO2, S-VIDEO inputs only
OSD RESET...

English-24
POWER SAVE Sets how long the monitor waits to go into power save mode after a lost \
signal. ONAll inputs except for TV*Note: When connecting DVI, video card might not stop sending digital dat\
a even if image hasdisappeared. In this case the monitor does not get to power management m\
ode.
STANDBY MODE Lowers power consumption. ECO
Note: When in ECO STANDBY mode, DDC/CI does not function. STANDBY
HEAT STATUS Displays status of the FAN, BRIGHTNESS and TEMPERATURE. -
FAN CONTROL Cooling fan...

English-25
English
GAIN Adjusts gain value.0
OFFSET Adjusts slice level of synchronized signal. 0
SYNC TERMINATE Selects the terminate resistance for matching the cable impedance. HIGH
RGB/HV inputs only
TERMINAL SETTING DVI MODE Selects the kind of DVI-D equipment which is connected to the DVI input.\
 Select “DVI-PC” DVI-PC when PC or other computer equipment is connected. Select “DVI-HD” \
when DVD player,
which has DVI-D output, is connected.
BNC MODE Selects the kind of equipment which is connected...

English-26
NOTE 1: CREATING A SCHEDULE
The schedule function allows the display to be set to power on and off at different times. Up to seven different schedules can 
be
programmed.
To program the schedule:
1. Enter the SCHEDULE menu. Highlight SCHEDULE SETTINGS using the up and do\
wn buttons. Press the SET or the + button to enter th e
Settings menu. Highlight the desired schedule number and press set. The box next to the number will turn yellow. The schedule c an now
be programmed.
2. Use the down...

English-27
EnglishREMOTE CONTROL ID FUNCTION
REMOTE CONTROL ID
The remote control can be used to control up to 100 individual MULTEOS monitors using
what is called the REMOTE CONTROL ID mode. The REMOTE CONTROL ID mode
works in conjunction with the Monitor ID, allowing control of up to 100 \
individual
MULTEOS monitors. For example: if there are many monitors being used in the\
 same
area, a remote control in normal mode would send signals to every monito\
r at the same
time (see Figure 1). Using the...

English-28
3. Press the “DISPLAY” button on the remote control while aiming at the “PRIMARY” monitor. The Information OSD will be shown attop left side of the screen.
Monitor ID:  Displays the ID number of the current monitor within the daisy chain.
Target ID:  Displays the ID number of the monitor that to be controlled via daisy c\
hain from the current monitor.
Press the “+” or “-” buttons to change the “Target ID” to show the ID number of the monitor to be controlled. To control the en tire daisy...