NEC Mt840 Lcd Projector Users Manual

EÐ21
Auto Adjust:
When ÒAuto AdjustÓ is set to ÒOnÓ, the  projector automatically
determines the best resolution for the current RGB input signal
to project an image using NECÕs Advanced AccuBlend Intelli-
gent Pixel Blending Technology.
The image can be automatically adjusted for geometry and sta-
bility; ÒHorizontal PositionÓ, ÒVertical PositionÓ and ÒPixel Ad-
just.Ó
On: Automatically adjusts image ÒHorizontal PositionÓ, ÒVer-
tical PositionÓ and ÒPixel Adjust.Ó
Off: User can adjust the image display...

EÐ22 Video Mode
Gamma:
Video Mode
Gamma
Noise Reduction
Color MatrixProjector Options
Menu
Setup
Menu
Language
English
Projector Pointer
Pointer 1Source Display
Off OnPointer 1
Pointer 2
Pointer 3
Pointer 4
Pointer 5
Pointer 6
Pointer 7
Pointer 8
You can select one of the following three levels for reducing video
noise to your preference.
NOTE: The lower the Noise Reduction level, the better the im-
age quality by way of higher video bandwidth.
Color Matrix
Projector Options
Enables you to set...

EÐ23
Setup
Orientation Page1 Page2 Page3
Front Floor
Background
BlueSignal Select
S-VideoAuto Video
Auto RGB1
Auto
RGB2
Auto
OKCancel Page4
Setup
Enables you to set operating options.
Press ÒOKÓ to save your changes for all the features of Page1, Page2,
Page3 and Page4.
[Page1]
Page4
Setup
Page1
Mouse
Button
Right Hand Left HandAuto Start Page2 Page3
Power Management
Power Off Confirmation
Keystone Save
Clear Lamp Hour Mater
Fan High Speed Mode
OKCancel
Sensitivity
Fast MediumSlow
Orientation:
This...

EÐ24
Tools
Capture
PC Card Files
ChalkBoard
[Page 3]
Setup
Page1 Page2 Page4
OKCancel Page3
PC Card Viewer Options
Start Mode
Show Folder ListManual Play Auto Play
Auto Play Interval
sec
15
Capture OptionsHigh QualityHigh CompressionNormal
PC Card Viewer Options
Start Mode
Sets the starting condition when PC Viewer input is selected on
the projector.
Show Folder List
When PC Card input is selected on the projector, the folder lists
will be displayed and allows you to select the presentation from
the PC...

EÐ25
PC Card Files
File Name Size Date
@.
@..
12345678.txt
12345678.bmp
12345678.htm

1234567890
1234567890
12345678901999/06/01 HH:MM
1999/06/01 HH:MM
1999/06/17 HH:MM
1999/06/17 HH:MM
1999/06/17 HH:MMExecute
Exit
Sort
Name (abc..)
All (*. *) File Group
Free Space
Path
c : /
Info.
5 Files
Help
Contents
Source Information
Projector Information
PC Card Files
Displays a list of all the files stored in the PC card so that you can
select a file you want to display. You can also sort files by file name
or...

EÐ26
Using the PC Card Viewer function
NOTE:
When using the supplied software (CD-ROM)
The software is designed to use with a personal computer only. Do
not play the software on CD player. Doing so could cause damage to
speakers.
Features
The Viewer feature allows slides stored on a PC card to be displayed
on the projector.  Even if no computer is available, presentations can
be conducted simply with the projector.  This feature is convenient
for holding presentations at meetings and in offices, as well...

EÐ27
Installing the PC Card Viewer Software
Before Installing
Perform the following before installing the PC Card Viewer software:
¥ If Windows95 is already started, exit all applications.  Installa-
tion may not be performed properly if any applications are run-
ning.
Installation
Install the viewer software as described below.
To quit installation before it is completed, press the Cancel button
then follow the instructions in the dialog box.
1. Start up Windows95.
2. Insert the CD-ROM into the CD-ROM...

EÐ28
Operating the PC Card Viewer Function from
the Projector (playback)
This section describes the operation for showing slides of presenta-
tion documents created using the PC Card Viewer function with the
projector.
It is also possible to make slides directly from the images projected
with the projector.
Projecting slides
1.  Insert a PC card into the  card slot.
Insert the PC card with the side with the insertion direction arrow
on the top.
 *  Press the eject button to eject the card.
2.  Select the...

EÐ29
Auto Play Mode
¥ If the ÒAuto PlayÓ option is selected in ÒPC Card Viewer Op-
tionsÓ of the menu, any given slide will start to play automati-
cally. You can also specify Auto Play Interval between 5 and 300
seconds.
Switching to Slides Directly from Other Input Modes
With this function it is possible to switch directly to a slide when the
picture of a VCR or computer is being projected.
Example:
When conducting presentations using a combination of slides and
moving pictures from a VCR, etc., it is...

EÐ30
Capturing Images Displayed on the Projector
Storing images displayed on the projector on the PC
card
Preparations:
Insert the PC card into the card slot.
Insert the PC card with the side with the insertion direction ar-
row on the top.
* Press the eject button to eject the card.
1. Project the image you wish to store on the projector.
2. Select the ÒCaptureÓ from the Tools menu.
NOTE:
¥ File size of the captured image varies depending on the resolution
of an input signal.
¥ Since an image data is...