NEC Mt1056 Lcd Projector Users Manual

E – 1
MENU
ENTERCANCELSELECT
POWER STATUS
ON/STAND BYSOURCE
AUTO
 ADJUST
AC IN
S-VIDEO
VIDEO AUDIO
RGB INPUT 2
AUDIO
RGB INPUT 1
L/MONO
R
AUDIORGB MONITOR
   OUTPUT
USB
PC-CARDC 
CONTROLMOUSE
OUTREMO
CONTR
INPU
MT1056
LCD Projector
User’s Manual
English 

E – 2
IMPORTANT INFORMATION
PrecautionsPlease read this manual carefully before using your NEC MT1056 Pro-
jector and keep the manual handy for future reference.
Your serial number is located under the name plate label on the left
side of your MT1056. Record it here:
CAUTIONTo turn off main power, be sure to remove the plug from
power outlet.
The power outlet socket should be installed as near to
the equipment as possible, and should be easily acces-
sible.
CAUTIONTO PREVENT SHOCK, DO NOT OPEN THE...

E – 3
Important SafeguardsThese safety instructions are to ensure the long life of your projector
and to prevent fire and shock. Please read them carefully and heed all
warnings.
Installation1. For best results, use your projector in a darkened room.
2. Place the projector on a flat, level surface in a dry area away from
dust and moisture.
3. Do not place your projector in direct sunlight, near heaters or heat
radiating appliances.
4. Exposure to direct sunlight, smoke or steam can harm internal com-...

E – 4
TABLE OF CONTENTS
1. INTRODUCTIONIntroduction to the MT1056 Projector ........................................... E-5
Getting Started ............................................................................. E-5
What’s in the Box ......................................................................... E-6
Getting to Know Your MT1056 Projector ...................................... E-7
Front / Side Features ............................................................. E-7
Rear / Side Features...

E – 5
1. INTRODUCTION
Introduction to the MT1056 ProjectorThis section introduces you to your new MT1056 (XGA) Projector and
describes the features and controls.
Congratulations on Your Purchase of The
MT1056 Projector
The MT1056 is one of the very best projectors available today. The
MT1056 enables you to project precise images up to 300 inches (mea-
sured diagonally) from your PC or Macintosh computer (desktop or
notebook), VCR, DVD player, document camera, a laser disc player or
PC Card Viewer.
You...

E – 6
What’s in the Box?Make sure your box contains everything listed. If any pieces are missing, contact your dealer.
Please save the original box and packing materials if you ever need to ship your MT1056 Projector.
MENU
ENTERCANCELSELECT
POWER STATUS
ON/STAND BYSOURCE
AUTO
 ADJUST
AC IN
S-VIDEO
VIDEO AUDIO
RGB INPUT 2
AUDIORGB INPUT 1
L/MONO
R
AUDIORGB MONITOR
   OUTPUT
USB
PC-CARDC CONTROLMOUSE
OUTREMO
CONTR
INPU
P
JF
O
C
U
SZ
O
O
M
V
O
L
.S
H
I
F
T
H
E
L
PPOINTERK
E
Y
S
T
O
N
EMAGNIFY
FREEZE...

E – 7
Getting to Know Your MT1056 Projector
MENU
ENTERCANCELSELECT
POWER STATUS
ON/STAND BYSOURCE
AUTO  ADJUST
AC IN
S-VIDEO
VIDEO AUDIO
RGB INPUT 2
AUDIO RGB INPUT 1
L/MONO
R
AUDIORGB MONITOR
   OUTPUT
USB
PC-CARDC CONTROLMOUSE
OUTREMO
CONTR
INPU
Zoom
Remote Sensor
Air-Filter
Lenscap
AC Input
Connect the supplied power cable’s three-
pin plug here.
Adjustable Tilt Foot
Lens
Ventilation (outlet) Carrying Handle Terminal Panel Air Filter Slot for Kensington
Micro saver Security
SystemPC Card Slot USB...

E – 8
1. Source Button
Use this button to select a video source such as a PC, VCR, DVD
player or PC Card Viewer (PC card).
Each time this button is pressed, the input source will change as fol-
lows:
→ RGB1 → RGB2 → Video → S-Video → PC Card Viewer 
If no input signal is present, the input will be skipped.
2. Auto Adjust Button (RGB only)
Use this button to adjust Position-H/V and Pixel Clock/Phase for an
optimal picture. Some signals may not be displayed correctly or take
time to switch between...

E – 9
Terminal Panel Features
USB
12 3
4
1. USB Terminal
Connect a commercially available mouse that supports USB. You can
operate the menu or PC Card Viewer with the USB mouse via this
terminal.
Note that this terminal is not used with a computer and that there may
be some brands of USB mouse that the projector does not support.
2 PC Card Slot
Push up and open the cover to access this slot. Insert a PC card here.
3. PC Card Access Indicator
Lights while this indicator light shows that data is being.
4....

E – 10
4. LED
Flashes when any button is pressed.
5. Power ON Button
If the main power is applied, you can use this button to turn your pro-
jector on.
PJFOCUS
ZOOM
VOL.SHIFT
HELPP
O
I
N
T
E
RKEYSTONEM
A
G
N
I
F
Y
F
R
E
E
Z
E
P
IC
-
M
U
T
EP
C
 
C
A
R
DSLIDEF
O
L
D
E
R
S
L
I
D
ELIST
OFF
VIDEO
AUTO ADJ.S-VIDEO
RGB1
RGB2
LASERONPOWER
S
E
L
E
C
T
3
21
Remote Control Features
NOTE: If you are using a Macintosh computer, you can click either the right-click or left-click button to activate the mouse.
1....