NEC Mt1055 Lcd Projector Users Manual

							E Ð 8
1. Source Button
Use this button to select a video source such as a PC, VCR, DVD
player or PC Card Viewer (PC card).
Each time this button is pressed, the input source will change as fol-
lows:
® RGB1 ® RGB2 ® Video ® S-Video ® PC Card Viewer ¾
If no input signal is present, the input will be skipped.
2. Auto Adjust Button (RGB only)
Use this button to adjust Position-H/V and Pixel Clock/Phase for an
optimal picture. Some signals may not be displayed correctly or take
time to switch between sources.
3. Menu Button
Displays the menu.
4. Select st 
§ © / Volume (+) (-) Buttons
st: Use these buttons to select the menu of the item you wish to
adjust.
When no menus appear, these buttons work as a volume con-
trol.
§ ©: Use these buttons to change the level of a selected menu item.
A press of the © button executes the selection.
When the menus or the Viewer tool bar is not displayed, these
buttons can be used to select a slide, or to move the cursor in
Folder List or Slide List.
When the pointer is displayed, these st 
§ © buttons move
the pointer.
5. Enter Button
Executes your menu selection and activates items selected from the
menu.
Top Features
6. Cancel Button
Press this button to exit Menus. Press this button to return the adjust-
ments to the last condition while you are in the adjustment or setting
menu.
7. Status Indicator
When this is lit red (orange in Eco mode) continually, its warning you
that the projection lamp has exceeded 1500 hours (2500 hours in Eco
mode) of service. After this light appears, it is advisable to replace the
projection lamp as soon as possible. (See page E-47). In addition the
message The lamp has reached the end of its usable life. Please re-
place the lamp. appears continually until the lamp is replaced.
If this light blinks red rapidly, it indicates that the lamp cover is not
attached properly or the projector is overheated.
See the Power / Status Light Messages on page E-49 for more details.
8. Power Indicator ( 
 )
When this indicator is green, the projector is on; when the indicator is
orange, it is in standby mode.
9. Power Button (ON / STAND BY)
Use this button to turn the power on and off when the power is sup-
plied and the projector is in standby mode.
NOTE: To turn off the projector, press and hold this button for a minimum oftwo seconds.
MENU
ENTERCANCEL
SELECT
POWER STATUS
ON
/STAND BY
SOURCE AUTO  ADJUST
1
5
7
82
3
4
6
9 
						

							E Ð 9
MENURCE
AUTO
 ADJUST
U
S
B
C CONTROLMOUSE
OUTPUTREMO
CONTR
INPU
P
C
-
C
A
R
D
Terminal Panel Features
Slot for Kensington
MicroSaver Security System14
USB
12 3
4
1. USB Terminal
Connect a commercially available mouse that supports USB. You can
operate the menu or PC Card Viewer with the USB mouse via this
terminal.
Note that this terminal is not used with a computer and that there may
be some brands of USB mouse that the projector does not support.
2 PC Card Slot
Insert a PC card here.
3. PC Card Access Indicator
Lights while accessing a PC card.
4. PC Card Eject Button
Press to eject a PC card.
5. PC Control Port (Mini DIN 8 Pin)
Use this port to connect your PC to control your projector via a serial
cable. This enables you to use your PC and serial communication pro-
tocol to control the projector. The NEC optional serial cable is required
to use this port. Also PC Control Utility 1.0 included in the supplied CD-
ROM must be installed on your PC.
If you are writing your own program, typical PC control codes are on
page E-56.
A cap is put on the port at the factory. Remove the cap when using the
port.
6. Mouse Output Port (Mini DIN 8 Pin)
Use this port to operate your computers mouse functions from the
remote control.
7. Remote Control Input Jack
Connect your remote control cable here for wired operation.
8. Audio Monitor Output Mini Jack
Connect additional external speakers here to listen to audio coming
from your computer, Video or S- Video input.
RGB Monitor Output Connector (Mini D-Sub 15 pin)
You can use this connector to loop your computer image to an external
monitor from the RGB input source.
9. RGB Audio Input 1 Connector
This is where you connect RGB audio output from a computer or an-
other RGB source.
RGB Input 1 Connector (Mini D-Sub 15 pin)
Connect your PC or other RGB equipment. Use the signal cable thats
supplied to connect to a PC.10. RGB Audio Input 2 Connector
This is where you connect RGB audio output from a computer or an-
other RGB source.
RGB Input 2 Connector (Mini D-Sub 15 pin)
Connect your PC or other RGB equipment. Use the signal cable thats
supplied to connect to a PC.
11. S-Video Input Port
Here is where you connect the S-Video input from an external source
like a VCR.
12. Left Channel/Mono Audio Input Jack (RCA)
This is the left channel audio input for stereo sound coming from video
equipment or audio system. This also serves as your monaural audio
input. (Video and S-video only)
Right Channel Audio Input Jack (RCA)
This is the right channel audio input for stereo sound. (Video and S-
video only)
NOTE: When using two Video sources simultaneously, the Left Channel Audio
Input jack is available for the S-Video source only and the Right Channel Audio
Input jack is available for the composite video source only.
13. Video Input
Connect a VCR, DVD player, laser disc player, or document camera
here to project video.
14. Built-in Security Slot ( 
 )
This security slot supports the MicroSaver¨ Security System.
MicroSaver¨ is a registered trademark of Kensington Microware
Inc. The logo is trademarked and owned by Kensington Microware Inc.
S-VIDEO
VIDEO AUDIO RGB INPUT 2 AUDIO RGB INPUT 1
L/MONO
R
AUDIORGB MONITOR
OUTPUT
8
9
10
11 12 13
PC CONTROLREMOTE
CONTROL
INPUT MOUSE
OUTPUT
5
6
7 
						

							E Ð 10
Remote Control Features
NOTE: If you are using a Macintosh computer, you can click either the right-click or left-click button to activate the mouse.
NOTE: If any one of the buttons is pressed and held for 60 seconds or more,
the button operations will cease to operate. This is not a malfunction, rather it
is a feature used to prolong battery power. To cancel this feature, press any one
of the buttons other than the Mouse button.
1. Infrared Transmitter
Direct the remote control toward the remote sensor on the projector
cabinet.
2. Laser Pointer
Beams a laser light when Laser button is pressed.3. LED
Flashes when any button is pressed.
4. Power On Button
If the main power is applied, you can use this button to turn your pro-
jector on.
5. Power Off Button
If the main power is applied, you can use this button to turn your pro-
jector off.NOTE: To turn off the projector, press and hold the POWER OFF button for aminimum of two seconds.
6. Video Button
Press this button to select an NTSC, PAL, SECAM or NTSC4.43 com-
patible video source from a VCR, DVD player, laser disc player or docu-
ment camera.
7. S-Video Button
Press this button to select an S-Video source from a VCR.
8. RGB 1 Button
Press this button to select a video source from computer or compo-
nent equipment connected to your RGB 1 port.
9. RGB 2 Button
Press this button to select a video source from computer or compo-
nent equipment connected to your RGB 2 port.
10. Auto Adjust Button (RGB only)
Press this button to automatically adjust the vertical/horizontal posi-
tion, clock frequency/phase and resolution if the projected picture is
not centered, if there are vertical stripes on the picture or if the picture
is flickering.
11. PJ Button
Press this button to switch the Mouse, Cancel/Right Click, and Enter/
Left Click buttons between the Projector mode (lit red) and the Com-
puter mode. Press this button or any one of the Menu, Help, Pointer,
PC Card, Folder List or Slide List buttons to switch to the Projector
mode and the PJ button lights red. To switch back to the Computer
mode, press the PJ button again.
12. Laser Button
Press and hold this button to activate the laser pointer. When lit, you
can use the laser to draw your audiences attention to a red dot that
you can place on any object.
13. Menu Button
Displays the menu for various settings and adjustments.
14. Mouse (st
§ ©) / (+) (Ð) Button
When you are in the Computer mode, these buttons work as a com-
puter mouse.
When you are in the Projector mode, which is indicated by lighting the
PJ button:
st: Use these buttons to select the menu of the item you wish to
adjust.
§ ©: Use these buttons to change the level of a selected menu item.
A press of the © button executes the selection.
When the pointer is displayed, these st§ © buttons move the
pointer.
1
2
KEYSTONE
FREEZE
PIC-
MUTE
HELPPOINTERPC CARD
VIDEO S-
VIDEOAUTO ADJ.
RGB 1
MENU LASER
R-CLICK /CANCEL
RGB 2 PJ
ON OFF
MAGNIFY
VOL.
SLIDE
FOLDER
SLIDE
LIST
3
54
10
11
*
12 9 6
8
7
13*
14 
						

							E Ð 11
16. Cancel/ Right Click Button
When you are in the Computer mode, this button works as the mouse
right button.
When you are in the Projector mode, which is indicated by lighting the
PJ button:
Press this button to exit Menus. It works the same way as the ÒCan-
celÓ button on the cabinet.
17. Pointer Button
Press this button to display one of the eight pointers; press again to
hide the pointer. You can move your pointer icon to the area you want
on the screen using the Mouse button.
18. Help Button
Provides information about operation and adjustment procedures or
the set information for the current menu or adjustment during menu
operation.
19. Keystone (+) (Ð) Button
Press the (+) or (Ð) button to correct the keystone (trapezoidal) distor-
tion, and make the image square.
20. Magnify (+) (Ð) Button
Use this button to adjust the image size up to 400%.
When the pointer is displayed, the image is magnified about the center
of the pointer. When the pointer is not displayed, the image is magni-
fied about the center of the screen.
When the image is magnified, the pointer is changed to the magnifying
icon.
21. Freeze Button
This button will freeze a picture. Press again to resume motion.
22. Picture Mute Button
This button turns off the image and sound for a short period of time.
Press again to restore the image and sound.
NOTE: When the menu is displayed, a press of this button mutes an
image and sound without turning off the menu.
23. Volume (+) (Ð) Button
Press (+) to increase the volume and (Ð) to decrease it.
24. PC Card Button
Press this button to select the PC Card Viewer source.
25. Slide (+) (Ð) Button
Press (+) to select the next folder or slide and (Ð) to select the previous
folder or slide.
26. Folder List Button
Press this button to select PC Card Viewer source to display a list of
folders included in a PC card.
27. Slide List Button
Press this button to select PC Card Viewer source to display a list of
slides included in a PC card.
28. Remote Jack
Connect your remote control cable here for wired operation.
*NOTE: The default is the Computer mode, which allows you to use the Mouse,
R-Click/Cancel, and L-Click/Enter buttons as your computer mouse. When the
MENU, HELP, POINTER, PC CARD, FOLDER LIST, or SLIDE LIST button is
pressed, the PJ button lights red to indicate that you are in the Projector mode.
If no buttons are pressed within 10 seconds, the light goes out and the Projec-
tor mode is canceled.
15
KEYSTONE
FREEZE
PIC-
MUTE
HELPPOINTERPC CARD
VIDEO S-
VIDEOAUTO ADJ.
RGB 1
MENU LASER
R-CLICK /CANCEL
RGB 2 PJ
ON OFF
MAGNIFY
VOL.
SLIDE
FOLDER
SLIDE
LIST
17*
18*
19
20
21
22
2316
24
*
25
26
*
27*
15. Enter / Left Click Button
When you are in the Computer mode, this button works as the mouse
left button.
When you are in the Projector mode, which is indicated by lighting the
PJ button:
Use this button to enter your menu selection. It works the same way as
the Enter button on the cabinet.
ELFREEZEPIC-
M
UTEP
C
 C
A
R
DM
AG
N
IF
YVOL.SLIDE
F
O
L
D
E
RSLIDE
LIST
28 
						

							E Ð 12
Operating Range
7m
Remote Control Battery Installation
1. Press firmly and slide the battery cover off.
2. Remove both old batteries and install new ones (AA). Ensure that
you have the batteries polarity (+/Ð) aligned correctly.
3. Slip the cover back over the batteries until it snaps into place.
Do not mix different types of batteries or new and old batteries.
Remote Control Precautions
¥ Handle the remote control carefully.
¥ If the remote control gets wet, wipe it dry immediately.
¥ Avoid excessive heat and humidity.
¥ If you will not be using the remote control for a long time, remove the
batteries.
¥ Do not place the batteries upside down.
¥ Do not look into the laser pointer while it is on.
¥ Do not point the laser beam at a person. 
						

							E Ð 13
Switching operation mode between mouse and projector
The three shaded buttons shown on the drawing work as a computer mouse in the Computer mode.
In the Computer mode the PJ button is not lit.
¥ When the MENU button is pressed, the PJ button lights red to indicate that you are in the Projector mode, which allows the projector menu
operation using the three buttons.
¥ When the POINTER button is pressed, the PJ button lights red to indicate that you are in the Projector mode and that the MOUSE st
§ © button
works as a moving button for the POINTER or magnified image.
¥ If no buttons are pressed within 10 seconds, the PJ buttons light goes out to indicate that you are in the Computer mode. To enable the projector
menu operation again, press the PJ button to light red. To move the pointer or a magnified image again, turn off the pointer and then turn on the
pointer (press the POINTER button two times).
¥ When the PJ button is lit, if you want to use the mouse function immediately, press the PJ button to return to the Computer mode (not lit).
KEYSTONE
FREEZE
PIC-
MUTE
HELPPOINTERPC CARD
VIDEO S-
VIDEOAUTO ADJ.
RGB 1
MENU LASER
R-CLICK /CANCEL
L-CLICK/ENTER
RGB 2 PJ
ON OFF
MAGNIFY
VOL.
SLIDE
FOLDER
SLIDE
LIST
KEYSTONE
FREEZE
PIC-
MUTE
HELPPOINTERPC CARD
VIDEO S-
VIDEOAUTO ADJ.
RGB 1
MENU LASER
R-CLICK /CANCEL
L-CLICK/ENTER
RGB 2 PJ
ON OFF
MAGNIFY
VOL.
SLIDE
FOLDER
SLIDE
LIST
Not lit
Works as a mouse for your computer.
Works as a right-click button
for your computer.
Works as a left-click button
for your computer.Lit red
Works as the Select button
on the projector.
Works as the Cancel
button on the projector.
Works as the Enter
button on the projector. 
						

							E Ð 14
2. INSTALLATION
This section describes how to set up your MultiSync MT1055/MT1050/
MT850 projector and how to connect video and audio sources.
Setting up Your Projector
Your MultiSync MT1055/MT1050/MT850 Projector is simple to set up
and use. But before you get started, you must first:
1. Determine the image size.
2. Set up a screen or select a non-glossy white wall onto which you
can project your image.
Carrying the Projector: Always carry your projector by the handle.
Ensure that the power cable and any other cables connecting to video
sources are disconnected before moving the projector.
When moving the projector or when it is not in use, cover the lens with
the lens cap.
Carrying handle
MENUENTERCANCEL
SELECT
POWER STATUS
ON
/OFF
SOURCEAUTO  ADJUST
USB
AC IN
Attaching the lens cap to the lens hood
with the supplied string and rivet.
Selecting a Location
The further your projector is from the screen or wall, the larger the
image. The minimum size the image can be is approximately 30 (0.76
m) measured diagonally when the projector is roughly 4 feet (1.3 m)
from the wall or screen. The largest the image can be is 300 (7.6 m)
when the projector is about 36.8 feet (11.2 m) from the wall or screen.
Using a Tabletop or Cart
1. Place your projector on a flat level surface at the optimal dis-
tance from the screen or wall so you realize the size image you
want. 
(Avoid having bright room lighting or sun light directly on the screen
or wall where youÕll be projecting the image.)
2. Connect the power cable, remove the lens cap and turn the pro-
jector on. 
(If no input signal is available, the projector will display a
background image.)
3. Ensure that the projector is square to the screen.
Lens cap
String
4. Move the projector left or right to center the image horizontally
on the screen.
5. To center the image vertically, lift the front edge of the projector
and press the One-Touch Tilt button on the front-left side of the
projector to release the Front Adjustable foot.
Top view
Screen
(There is approximately 5 degrees of up and down adjustment for the front
of the projector.)
6. If  the  projected image does not appear square to the screen then
use keystone correction for proper adjustment.
7. Adjust the size of the image using the Zoom ring on the lens.
Side view
Screen
AC IN
Rivet 
						

							E Ð 15
MENUENTERCANCELSELECT
POWER STATUS
ON
/OFF
SOURCEAUTO  ADJUST
AC IN
MENUENTERCANCELSELECT
POWER STATUS
ON
/OFF
SOURCE
AUTO
 ADJUST
A
C
 
I
N
Adjusting the Tilt Foot
Press and hold the Tilt button on the left side of the projector.
Lift the front edge of the projector to the height you want, and release
the button to lock the Adjustable Tilt Foot.
To fine-tune the imageÕs position vertically on the screen, rotate the
foot. Each of the rear feet height can be changed up to 0.6Ó (4mm). 
						

							E Ð 16 Ceiling Installation
Screen top
2.9Ó (79.5mm)
Lens Center
Screen center
Screen Bottom
Throwing Distance (C)Throwing Angle (a)Projector Foot
D
B
WARNING
¥ Installing your projector on the ceiling must be done by a quali-
fied technician. Contact your NEC dealer for more information.
* Do not attempt to install the projector yourself.
¥ Only use your projector on a solid, level surface. If the projector
falls to the ground, you can be injured and the projector se-
verely damaged.
¥ Do not use the projector where temperatures vary greatly. The
projector must be used at temperatures between 32ûF (0ûC)
and 104ûF (40ûC).
¥ Do not expose the projector to moisture, dust, or smoke. This
will harm the screen image.
¥ Ensure that you have adequate ventilation around your projec-
tor so heat can dissipate. Do not cover the vents on the side or
the front of the projector.If your projector is mounted on the ceiling and your image is upside
down, use the ÒMenuÓ and ÒSelectÓ buttons on your projector cabinet or
st button on your remote control to correct the orientation. (See page
E-36.)
Reflecting the Image
Using a mirror to reflect your projectorÕs image enables you to enjoy a
much larger image. Contact your NEC dealer if you need a mirror. If
youÕre using a mirror and your image is inverted, use the ÒMenuÓ and
ÒSelectÓ buttons on your projector cabinet or st buttons on your re-
mote control to correct the orientation. (See page E-36.)
Distance Chart
Throwing Angle (a) Throwing Distance (C)
2.9Ó (79.5mm) Lens Center Screen top
Screen center
Screen BottomDB
Projector Foot
B=Vertical distance between lens center and screen center
C=Throw distance
D=Vertical distance between lens center and screen bottom (screen top for ceiling installation) 
						

							E Ð 17
10.3
10.1
10.1
10.0
10.0
10.0
10.0
9.9
9.9
9.9
9.8
9.8
9.8
9.8 DiagonalWidth Height wide telephoto wide telephotoB
C Screen Size
Da40
1016
60
1524
67
1701.8
72
1828.8
84
2133.6
90
2286
100
2540
120
3048
150
3810
180
4572
210
5334
240
6096
270
6858
300
7620inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm32
812.8
48
1219.2
53.6
1361.44
57.6
1463.04
67.2
1706.88
72
1828.8
80
2032
96
2438.4
120
3048
144
3657.6
168
4267.2
192
4876.8
216
5486.4
240
609624
609.6
36
914.4
40.2
1021.08
43.2
1097.28
50.4
1280.16
54
1371.6
60
1524
72
1828.8
90
2286
108
2743.2
126
3200.4
144
3657.6
162
4114.8
180
4572 inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mminch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm10.2
259.5
15.3
389.2
17.1
434.7
18.4
467.1
21.5
544.9
23.0
583.9
25.5
648.7
30.6
778.5
38.3
973.1
46.0
1167.7
53.6
1362.3
61.3
1557.0
69.0
1751.6
76.6
1946.2inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm56.3
1430.3
86.1
2185.8
96.5
2450.2
103.9
2639.0
121.7
3092.3
130.7
3318.9
145.5
3696.6
175.3
4452.1
219.9
5585.2
264.5
6718.4
309.1
7851.5
353.7
8984.7
398.3
10117.8
443.0
11251.0inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm68.6
1743.7
104.3
2649.9
116.8
2967.1
125.7
3193.7
147.1
3737.4
157.8
4009.3
175.7
4462.4
211.4
5368.7
264.9
6728.0
318.4
8087.4
371.9
9446.8
425.4
10806.2
479.0
12165.5
532.5
13524.9inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm1.8
45.3
2.7
68.0
3.0
75.9
3.2
81.5
3.7
95.1
4.0
101.9
4.5
113.3
5.4
135.9
6.7
169.9
8.0
203.9
9.4
237.9
10.7
271.8
12.0
305.8
13.4
339.8inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mmdegree
degree
degree
degree
degree
degree
degree
degree
degree
degree
degree
degree
degree
degreeÐ
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð8.5
8.4
8.3
8.3
8.3
8.3
8.3
8.3
8.2
8.2
8.2
8.2
8.2
8.2degree
degree
degree
degree
degree
degree
degree
degree
degree
degree
degree
degree
degree
degree Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
40
1016
60
1524
67
1701.8
72
1828.8
84
2133.6
90
2286
100
2540
120
3048
150
3810
180
4572
210
5334
240
6096
270
6858
300
7620inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm32
812.8
48
1219.2
53.6
1361.44
57.6
1463.04
67.2
1706.88
72
1828.8
80
2032
96
2438.4
120
3048
144
3657.6
168
4267.2
192
4876.8
216
5486.4
240
609624
609.6
36
914.4
40.2
1021.08
43.2
1097.28
50.4
1280.16
54
1371.6
60
1524
72
1828.8
90
2286
108
2743.2
126
3200.4
144
3657.6
162
4114.8
180
4572 inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mminch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm10.2
259.5
15.3
389.2
17.1
434.7
18.4
467.1
21.5
544.9
23.0
583.9
25.5
648.7
30.6
778.5
38.3
973.1
46.0
1167.7
53.6
1362.3
61.3
1557.0
69.0
1751.6
76.6
1946.2inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm56.5
1434.7
85.8
2179.8
96.1
2440.5
103.4
2626.8
121.0
3073.8
129.8
3297.3
144.5
3669.8
173.8
4414.9
217.8
5532.4
261.8
6650.0
305.8
7767.6
349.8
8885.1
393.8
10002.7
437.8
11120.3inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm68.2
1732.7
103.4
2626.7
115.7
2939.7
124.5
3163.2
145.7
3699.6
156.2
3967.8
173.8
4414.8
209.0
5308.9
261.8
6649.9
314.6
7991.0
367.4
9332.0
420.2
10673.1
473.0
12014.1
525.8
13355.2inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm1.8
45.3
2.7
68.0
3.0
75.9
3.2
81.5
3.7
95.1
4.0
101.9
4.5
113.3
5.4
135.9
6.7
169.9
8.0
203.9
9.4
237.9
10.7
271.8
12.0
305.8
13.4
339.8inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm10.3
10.1
10.1
10.1
10.1
10.0
10.0
10.0
10.0
10.0
9.9
9.9
9.9
9.9degree
degree
degree
degree
degree
degree
degree
degree
degree
degree
degree
degree
degree
degreeÐ
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð8.5
8.4
8.4
8.4
8.4
8.4
8.4
8.3
8.3
8.3
8.3
8.3
8.3
8.3degree
degree
degree
degree
degree
degree
degree
degree
degree
degree
degree
degree
degree
degree Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð DiagonalWidth Height wide telephoto wide telephotoB
C Screen Size
Da
40
1016
60
1524
67
1701.8
72
1828.8
84
2133.6
90
2286
100
2540
120
3048
150
3810
180
4572
210
5334
240
6096
270
6858
300
7620inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm32
812.8
48
1219.2
53.6
1361.44
57.6
1463.04
67.2
1706.88
72
1828.8
80
2032
96
2438.4
120
3048
144
3657.6
168
4267.2
192
4876.8
216
5486.4
240
609624
609.6
36
914.4
40.2
1021.08
43.2
1097.28
50.4
1280.16
54
1371.6
60
1524
72
1828.8
90
2286
108
2743.2
126
3200.4
144
3657.6
162
4114.8
180
4572 inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mminch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm10.3
261.6
15.4
392.3
17.2
438.1
18.5
470.8
21.6
549.3
23.2
588.5
25.7
653.9
30.9
784.7
38.6
980.8
46.3
1177.0
54.1
1373.2
61.8
1569.3
69.5
1765.5
77.2
1961.7inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm57.0
1446.5
86.5
2197.5
96.9
2460.3
104.3
2648.1
122.0
3098.6
130.9
3323.9
145.6
3699.4
175.2
4450.4
219.6
5576.8
263.9
6703.2
308.3
7829.6
352.6
8956.1
396.9
10082.5
441.3
11208.9inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm68.8
1746.9
104.3
2648.0
116.7
2963.4
125.5
3188.7
146.8
3729.4
157.5
3999.7
175.2
4450.3
210.7
5351.4
263.9
6703.1
317.1
8054.8
370.3
9406.5
423.6
10758.2
476.8
12109.9
530.0
13461.6inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm1.7
43.2
2.6
64.9
2.9
72.4
3.1
77.8
3.6
90.8
3.8
97.3
4.3
108.1
5.1
129.7
6.4
162.2
7.7
194.6
8.9
227.0
10.2
259.5
11.5
291.9
12.8
324.3inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm
inch
mm10.2
10.1
10.1
10.1
10.1
10.0
10.0
10.0
10.0
10.0
9.9
9.9
9.9
9.9degree
degree
degree
degree
degree
degree
degree
degree
degree
degree
degree
degree
degree
degreeÐ
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð8.5
8.4
8.4
8.4
8.4
8.4
8.4
8.3
8.3
8.3
8.3
8.3
8.3
8.3degree
degree
degree
degree
degree
degree
degree
degree
degree
degree
degree
degree
degree
degree Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð
Ð DiagonalWidth Height wide telephoto wide telephotoB
C Screen SizeDa
MT850
MT1050
MT1055
NOTE: Distances may vary +/Ð5%.