NEC Mt1050 Lcd Projector Users Manual

E Ð 38
[Page6]
Communication Speed:
This feature sets the baud rate of the PC Control port (Mini DIN 8
Pin).
It supports data rates from 4800 to 38400 bps.
The default is 38400 bps. Select the appropriate baud rate for your
equipment to be connected.
Default Source Select:
You can set the projector to default to any one of its inputs each
time the projector is turned on.
Last .............. Sets the projector to default to the previous or last active
input each time the projector is turned on.
Auto...

E Ð 39
Changing Background Logo:
The Logo button allows you to select a background logo from graphic
files on a PC card and change to it as the background logo.
NOTE: File size must be 64KB or less. Other file formats than JPEG andBMP are not available.
1. Use the s or t button to select a JPEG or BMP file for your back-
ground logo.
2. Use the © and then t button to select ÒLogoÓ.
3. Press the Enter on the remote control or the cabinet. You will get the
confirmation dialog box.
4. Select ÒOKÓ and press...

E Ð 40
Using the PC Card Viewer function
NOTE: When using the supplied software (CD-ROM)
The software is designed to use with a personal computer only. Do not play the
software on CD player. Doing so could cause damage to speakers.
Features
The Viewer feature allows slides stored on a PC  memory card (re-
ferred to as PC card in this manual) to be displayed on the projector.
Even if no computer is available, presentations can be conducted sim-
ply with the projector.  This feature is convenient for...

E Ð 41
Installing the PC Card Viewer Software
Before Installing
Perform the following before installing the PC Card Viewer software:
¥ If Windows is already started, exit all applications.  Installation may
not be performed properly if any applications are running.
Installation
Install the viewer software as described below.
To quit installation before it is completed, press the Cancel button
then follow the instructions in the dialog box.
1. Start up Windows.
2. Insert the CD-ROM into the CD-ROM drive....

E Ð 42
Operating the PC Card Viewer Function
from the Projector (playback)
This section describes the operation for showing slides of presentation
documents created using the PC Card Viewer function with the projec-
tor.
It is also possible to make slides directly from the images projected
with the projector.
Projecting slides
1.  Insert a PC card into the  card slot.
Insert the PC card with the side with the insertion direction arrow
on the top.
 *  Press the eject button to eject the card.
2.  Select...

E Ð 43
When the tool bar is not displayed:
Press the FOLDER LIST button on the remote control to display fold-
ers from a PC card in the projectorÕs PC Card slot.
Use the SLIDE +/- button to
advance to the next  folder or
return to the previous folder.
FolderFolder Folder Folder
Folder
SlideSlide Slide Slide
Slide
SlideSlideSlide
Slide
Slide(Table) cursor (green marks)
Use the SLIDE +/- button to
advance to the next slide or re-
turn to the previous slide.
Auto Play Mode
¥ If the ÒAuto PlayÓ option is...

E Ð 44
Capturing Images Displayed on the Projector
Storing images displayed on the projector on the PC card
Preparations:
Insert the PC card into the card slot.
Insert the PC card with the side with the insertion direction arrow on
the top.
* Press the eject button to eject the card.
1. Project the image you wish to store on the projector.
2. Select the ÒCaptureÓ from the Tools menu.
3. A tool bar will appear.
The tool bar includes the following buttons:
Drag ............. Drags to move the tool bar (for...

E Ð 45
Uninstalling the PC Card Viewer Software
Even if you do now know the PC Card Viewer softwares file names or
where they are stored, the PC Card Viewer software files can be easily
removed from the system using the Install/Uninstall Applications con-
trol panel in Windows.  (Normally there is no need to perform this op-
eration.)
Uninstalling the software
Use the procedure described below to uninstall the PC Card Viewer
software files.
1. From the Start menu, select Settings then Control Panels.
2....

E Ð 46
Terminology
PC card
ATA card
CompactFlash
TYPE (I, II and III)
BMP
JPEGThis is the name of a card currently being standardized by the Japan Electronic Industry Association (JEIDA) and PCMCIA
(Personal Computer Memory Card Interface Association) of the United States.
A type of PC card.  ATA was originally a type of interface between computers and fixed disk devices.  The ATA card is a standard
card-type recording medium.
CompactFlash card is a small removable card conforming to ATA specifications....

E Ð 47
This section describes the simple maintenance procedures you should
follow to replace the lamp and clean the filter.
Replacing the Lamp
After your lamp has been operating for 1500 hours (2500 hours : Eco
mode) or longer, the ÒStatusÓ light in the cabinet will go on and the
message will appear. Even though the lamp may still be working, re-
place it at 1500 (2500 hours : Eco mode) hours to maintain optimal
projector performance.
CAUTION
¥ DO NOT TOUCH THE LAMP immediately after it has been used. It...