NEC Mt1045 Projector Users Manual

							EÐ41
Timing Chart
Y NTSC 6402480 60 15.734 -
Y PAL 7682576 50 15.625 -
Y SECAM 7682576 50 15.625 -
Y VESA 6402350 85.08 37.86 31.5
Y MAC 6402400 66 35 30.24
Y IBM 6402400 70 31.47 25.175
Y VESA 6402400 85.08 37.86 31.5
Y VESA 6402480 59.94 31.47 25.175
Y IBM 6402480 60 31.47 25.175
Y MAC 6402480 60 31.47 25.175
Y MAC 6402480 66.67 34.97 31.334
Y MAC 6402480 66.67 35 30.24
Y VESA 6402480 72.81 37.86 31.5
Y VESA 6402480 75 37.5 31.5
Y IBM 6402480 75 39.375 31.49
Y VESA 6402480 85.01 43.269 36
Y IBM 7202350 70.09 31.469 28.322
Y VESA 7202400 85.04 37.927 35.5
Y IBM 7202350 87.85 39.44 35.5
Y IBM 7202400 87.7 39.375 35.5
Y VESA 8002600 56.25 35.16 36
Y VESA 8002600 60.32 37.879 40
Y VESA 8002600 72.19 48.077 50
Y VESA 8002600 75 46.88 49.5
Y VESA 8002600 85.06 53.674 56.25
#Y MAC 8322624 74.55 49.725 57.283
#Y VESA 10242768 43 Interlaced 35.5 44.9
#Y VESA 10242768 60 48.363 65
#Y VESA 10242768 70.07 57.476 75
#Y IBM 10242768 72.03 58.131 79
#Y MAC 10242768 74.93 60.241 80
#Y VESA 10242768 75.03 60.023 78.75
#Y VESA 10242768 85 68.677 94.5
##Y VESA 11522864 75 67.5 108
##Y MAC 11522870 75.06 68.681 100
##Y SUN 11522900 65.95 61.796 92.94
##Y SGI 11522900 76.05 71.736 105.6
##Y VESA 12802960 60 60 108
##Y SGI 128021024 60 63.9 107.35
##Y VESA 128021024 60.02 63.981 108
##Y MAC 128021024 60.38 64.31 107
##Y MAC 128021024 69.89 74.882 118.5
##Y HP 128021024 72.01 78.125 135
##Y SUN 128021024 76.11 81.13 135
##Y VESA 128021024 75.03 79.976 135
##Y VESA 128021024 85.02 91.146 157.5 Y / N SignalResolution Refresh Rate Frequency H. Dot Clock
( Dots ) ( Hz ) ( kHz ) ( MHz )
#Y: Images in above flagged with # and Y are compressed with Advanced AccuBlend on MT840.
##Y: Images in above flagged with ## and Y are compressed with Advanced AccuBlend on MT1040. 
						

							EÐ42
Cable Connection
Communication Protocol
Baud rate: 38400 bps
Data length: 8 bits
Parity: No parity
Stop bit: One bit
X on/off: None
CommunicationsFull duplex
procedure:
1 2 54 36
7 8
To RxD of PC©PC Control Connector (DIN-8P)
To TxD of PC§To GND of PC©
NOTE:  Pins 2, 3, 5, 6 and 8 are used inside the projector.
PC Control Codes
Function Code Data
POWER ON 02H 00H 00H 00H 00H 02H
POWER OFF 02H 01H 00H 00H 00H 03H
INPUT SELECT RGB 1 02H 03H 00H 00H 02H 01H 01H 09H
INPUT SELECT RGB 2 02H 03H 00H 00H 02H 01H 02H 0AH
INPUT SELECT VIDEO 02H 03H 00H 00H 02H 01H 06H 0EH
INPUT SELECT S-VIDEO 02H 03H 00H 00H 02H 01H 0BH 13H
INPUT SELECT PC CARD VIEWER02H 03H 00H 00H 02H 01H 1FH 27H
PICTURE MUTE ON 02H 10H 00H 00H 00H 12H
PICTURE MUTE OFF 02H 11H 00H 00H 00H 13H
SOUND MUTE ON 02H 12H 00H 00H 00H 14H
SOUND MUTE OFF 02H 13H 00H 00H 00H 15H
ON SCREEN MUTE ON 02H 14H 00H 00H 00H 16H
ON SCREEN MUTE OFF 02H 15H 00H 00H 00H 17H
NOTE: Contact your local dealer for a full list of the PC Control
Codes if needed.