NEC Mt1040 Lcd Projector Users Manual

							EÐ21
Auto Adjust:
When ÒAuto AdjustÓ is set to ÒOnÓ, the  projector automatically
determines the best resolution for the current RGB input signal
to project an image using NECÕs Advanced AccuBlend Intelli-
gent Pixel Blending Technology.
The image can be automatically adjusted for geometry and sta-
bility; ÒHorizontal PositionÓ, ÒVertical PositionÓ and ÒPixel Ad-
just.Ó
On: Automatically adjusts image ÒHorizontal PositionÓ, ÒVer-
tical PositionÓ and ÒPixel Adjust.Ó
Off: User can adjust the image display functions (ÒHorizontal
PositionÓ, ÒVertical PositionÓ and ÒPixel AdjustÓ) manu-
ally.
Horizontal/Vertical Position (when Auto Adjust is off):
Adjusts the image location from left to right.
This adjustment is made automatically when the Auto Adjust is
turned on.
Pixel Adjust (when Auto Adjust is off):
Displays the Clock and Phase adjustments.
Clock: Use this item with the ÒAuto Adjust onÓ to fine tune the
computer image or to remove any vertical banding that
might appear. This function adjusts the clock frequen-
cies that eliminate the horizontal banding in the image.
Press the § and © buttons until the banding disappears.
This adjustment may be necessary when you connect your
computer for the first time. This adjustment is made au-
tomatically when the Auto Adjust is turned on.
Phase: Use this item to adjust the clock phase or to reduce video
noise, dot interference or cross talk. (This is evident when
part of your image appears to be shimmering.) Use the
§ and © buttons to adjust the image.
Use ÒPhaseÓ only after the ÒClockÓ is complete.
This adjustment is made automatically when the Auto
Adjust is turned on.
Resolution (when Auto Adjust is off):
This allows you to activate or deactivate the Advanced AccuBlend
feature.
Auto: Turns on the Advanced AccuBlend feature. The projec-
tor automatically reduces or enlarges the current image
to fit the full screen.
Native: Turns off the Advanced AccuBlend feature. The projec-
tor displays the current image in its true resolution.
NOTE: While you are displaying an image with higher resolu-
tion than the projectors native resolution, even when you are in
the Native mode, the image is displayed full screen using the
Advanced AccuBlend feature.
Color Temperature
This feature adjusts the color temperature using the slide bar.
Move the slide bar to the right to increase the color temperature for a
bluish image; to the left to decrease it for a reddish image.
Keystone
This feature corrects the keystone (trapezoidal) distortion to make
the top of the screen longer or shorter to be the same as the bottom.
Use the § or © buttons on the slide bar to correct the keystone
(trapezoidal) distortion.
NOTE: The maximum keystone angle that can be corrected is 15
degrees upward and downward with the projector placed horizon-
tally. However, a picture will be blurred if you correct the keystone
angle beyond +12 degrees or more for SXGA signal on MT840.
Factory Default
Image Options
Image Mode
Video Mode
Image Mode
Aspect Ratio
Color Temperature
Aspect Ratio
Normal Zoom
Cinema
Wide Zoom
Changes all adjustments and setting to the factory preset for each
source individually except Lamp Usage Hours. (To reset the lamp
usage time, see ÒClear Lamp Hour MeterÓ on page E-23.
All Data:Reset  all  the  adjustments  and  settings for all
the signals to the factory preset.
Current Signal:Resets the adjustments for the current signal to
the factory preset levels.
Image Options
Provides optional controls such as gamma
correction, component signal selection,
wide screen and video noise reduction
features.
Image Mode
Allows you to select the item you want to adjust.
NOTE: Aspect Ratio is not available for ÒPC Card ViewerÓand ÒRGBÓ.
Aspect Ratio:
Allows you to choose the best screen size mode to fit on the screen.
Normal: Displays normal video picture with a 4-to-3 aspect
ratio as is.
Zoom: Displays DVDÕs video picture with a 16-to-9 aspect
ratio expanded in the horizontal and vertical direc-
tion, maintaining  the original proportion.
Wide Zoom: Displays DVDÕs squeezed video picture with a 16-
to-9 aspect ratio expanded in the horizontal direction,
converted to 4-to-3 aspect ratio.
Cinema: Displays DVDÕs squeeze video picture with a 16-to-
9 aspect ratio compressed in the vertical direction,
maintaining the 16-to-9 aspect ratio.
Factory Default
All Signals Current Signal Restore to Factory Setting
Restore 
						

							EÐ22 Video Mode
Gamma:
Video Mode
Gamma
Noise Reduction
Color MatrixProjector Options
Menu
Setup
Menu
Language
English
Projector Pointer
Pointer 1Source Display
Off OnPointer 1
Pointer 2
Pointer 3
Pointer 4
Pointer 5
Pointer 6
Pointer 7
Pointer 8
You can select one of the following three levels for reducing video
noise to your preference.
NOTE: The lower the Noise Reduction level, the better the im-
age quality by way of higher video bandwidth.
Color Matrix
Projector Options
Enables you to set preferences and other
operating options.
Menu
Gamma
Normal Natural 1
Natural 2
Use the § or © buttons to choose ÒNormalÓ when in a lighted
room and ÒNatural 1&2Ó when in a darkened room. ÒNatural 1Ó
for better flesh tone; ÒNatural 2Ó for true reproduction of middle
tones.
Each mode is recommnded for :
Normal: Default for RGB signal (Factory preset)
Natural 1: Default for Video and S-Video signal
Natural 2: Default for component signal
Noise Reduction:
Noise Reduction
Off Low
MediumHigh
Color Matrix
Select Color Matrix
SDTV HDTV
Select Color Matrix
Cb/Cr B-Y/R-YPb/Pr
First  select an appropriate color matrix to fit your component
signal for HDTV or SDTV. Then select an appropriate matrix
type from B-Y/R-Y, Cb/Cr or Pb/Pr.
NOTE:  The  Color Matrix feature is available for component
video signal only.Allows you to set preferences for the on-screen menu.
Language:
You can choose one of seven languages for on-screen instruc-
tions. The options are: English, German, French, Italian, Span-
ish, Swedish and Japanese.
Projector Pointer:
This enables you to select from eight different Pointer icons for
the ÒPointerÓ button on your remote control.
After moving your Pointer icon to the area you want on the screen,
press the Magnify button on the remote control to enlarge the
selected area on the screen.
NOTE: There may be cases where the Pointer function is not avail-
able for a non-interlace signal at 15kHz such as video game.
Source Display:
You can turn on and off the information for input name such as
VIDEO and RGB.
When this option is on, the current input will be displayed each
time you switch sources or turn on the projector. 
						

							EÐ23
Setup
Orientation Page1 Page2 Page3
Front Floor
Background
BlueSignal Select
S-VideoAuto Video
Auto RGB1
Auto
RGB2
Auto
OKCancel Page4
Setup
Enables you to set operating options.
Press ÒOKÓ to save your changes for all the features of Page1, Page2,
Page3 and Page4.
[Page1]
Page4
Setup
Page1
Mouse
Button
Right Hand Left HandAuto Start Page2 Page3
Power Management
Power Off Confirmation
Keystone Save
Clear Lamp Hour Mater
Fan High Speed Mode
OKCancel
Sensitivity
Fast MediumSlow
Orientation:
This reorients your image for your type of projection.
The options are:front floor projection, rear ceiling projection, rear
floor projection, and front ceiling projection.
Background:
Use this feature to display a black, blue screen or logo when no
signal is available.
Transferring a logo from your PC
You can transfer your background logo from your PC to the projector.
To proceed as follows:
1) Install the PC Control Utility 1.0 on your PC from the supplied CD-
ROM. See page E-27 for installation.
2) Connect the PC CONTROL port of the projector with the serial
port of your PC with the supplied serial cable and then turn on the
projector.
3) Start the PC Control Utility on your PC.
4) Click Logo Transfer button.
For more detailed information, see Readme.txt file included on the
supplied CD-ROM.
NOTE: File size must be 64KB or less. JPEG and BMP images are
available only.
Signal Select:

Allows you to choose RGB 1 or 2 for an RGB 1 or 2 source
such as a computer, or Component for a component video source
such as a DVD player. Normally select Auto and the projector
automatically detects a component signal. However there may be
some component signals that the projector is unable to detect. If
this is the case, select Component.

This feature enables you to select composite video standards
manually. Normally select Auto.
When you select the video standard for Video and S-Video sepa-
rately, first select the radio button and then select the video stan-
dard from the pull-down menu.
This must be done for Video and S-Video respectively.[Page2]
Auto Start:
Turns the projector on automatically when the power cable is
inserted into an active power outlet. This eliminates the need to
always use the ÒPowerÓ button on the remote control or projector
cabinet.
Power Management:
When this option is on and there is no RGB input for five min-
utes or more, the projector will automatically turn itself off.
Power Off Confirmation:
This option determines whether a confirmation dialog for turn-
ing off the projector will appear or not.
NOTE: When the confirmation message is displayed, you must be in the Pro-
jector mode to operate your projector using the remote control. If not, press
the Computer/Projector Select button to change your projector to the Projec-
tor mode. The button lights to indicate that you are in the Projector mode.
Mouse Settings:
This option lets you to change your USB mouse settings. The
mouse settings feature is available for USB mouse only. Choose
the settings you want:
Mouse Button: ÒRight HandÓ or ÒLeft HandÓ
Mouse Sensitivity: ÒFastÓ, ÒMediumÓ or ÒSlowÓ
Keystone Save:
This option enables you to save your current keystone settings.
Saving your change once affects all sources. The changes are
saved when you turn off the projector.
Fan High Speed Mode:
This option allows you to select two modes for fan speed: high-
speed mode and normal speed mode.
When you wish to cool down the temperature inside the projec-
tor quickly, check this box. This is convenient especially when
the projector is installed on the ceiling.
Clear Lamp Hour Meter:
Resets the lamp clock back to zero. Pressing this button appears
the ÒClear Lamp Usage ?Ó confirmation dialog box. To reset the
lamp usage hour, press ÒOKÓ.
NOTE: The projector will turn off and go into standby mode after 2100
hours (1600 hours for MT1045) of service. If this happens, press the
ÒHelpÓ button on the remote control for ten seconds to reset the lamp
clock back to zero. Do this only after replacing the lamp. 
						

							EÐ24
Tools
Capture
PC Card Files
ChalkBoard
[Page 3]
Setup
Page1 Page2 Page4
OKCancel Page3
PC Card Viewer Options
Start Mode
Show Folder ListManual Play Auto Play
Auto Play Interval
sec
15
Capture OptionsHigh QualityHigh CompressionNormal
PC Card Viewer Options
Start Mode
Sets the starting condition when PC Viewer input is selected on
the projector.
Show Folder List
When PC Card input is selected on the projector, the folder lists
will be displayed and allows you to select the presentation from
the PC Card.
Auto Play
If  this option is checked,  any given slide will start to play auto-
matically. You can specify interval time between 5 and 300 sec-
onds.
NOTE: The Auto Play Interval time set on the PC Control Utility
overrides the one set here.
Manual Play
Views a slide manually when PC Card Viewer input is selected.
NOTE: The Auto Play and Manual Play options determine the
behavior of the Play/Stop [  /  ] icon on the Viewer tool bar.
When selecting ÒShow Folder ListÓ or ÒManual PlayÓ while the
ÒAuto PlayÓ feature is not checked, and you select PC Card Viewer
for the input source,  you can manually advance to the next slide
or the preivious slide.
NOTE: If you check  ÒAuto PlayÓ and select ÒPC Card ViewerÓ
on the projector,  the slides will automatically start to play back
from any given slide.
Capture Options (available for JPEG only)
You have three options for JPEG compression quality: High qual-
ity, Normal and High Compression.
High Quality
Gives quality of JPEG a priority.
Normal
Gives normal JPEG quality.
High Compression
Gives compression a priority.
Tools
Provides tools for capturing images, dis-
playing files in a PC Card and drawing.
NOTE: The ÒToolsÓ feature is required
for a PC card.
Capture
Allows you to capture an image from a source that is currently being
displayed. The image is saved as JPEG in the PC card. When you
select Capture from the menu, you will get a tool bar. You can cap-
ture an image directly using the tool bar when the menu is not dis-
played.
Remote Sensor
This option determines which remote sensors on the projector are
effective in wireless mode.
The options are: front, rear, right, or left. Checked sides show that
they can accept the infrared signal from the supplied remote control.
S-Video Mode Select:
This feature is used to select the S-Video signal detection mode. This
allows identifying of the S-Video signals with different aspect ratio
(Zoom signal 16:9, Wide Zoom signal 4:3).
S1 ............. Identifies a Zoom signal only.
S2 ............. Identifies Zoom or Wide Zoom signal.
OFF ......... Does not identify any S-video signal.
[Page 4]
Setup
Remote Sensor Page1 Page2 Page3
S-Video Mode Select
Off
OKCancel Page4 
						

							EÐ25
PC Card Files
File Name Size Date
@.
@..
12345678.txt
12345678.bmp
12345678.htm

1234567890
1234567890
12345678901999/06/01 HH:MM
1999/06/01 HH:MM
1999/06/17 HH:MM
1999/06/17 HH:MM
1999/06/17 HH:MMExecute
Exit
Sort
Name (abc..)
All (*. *) File Group
Free Space
Path
c : /
Info.
5 Files
Help
Contents
Source Information
Projector Information
PC Card Files
Displays a list of all the files stored in the PC card so that you can
select a file you want to display. You can also sort files by file name
or date, or display the file.
Although a list of all the files in the PC card is displayed, you can
view files in text, HTML, JPEG and BMP format only.
CaptureExit
Freeze
Drag
Drag: Drags to move the tool bar. (for USB mouse operation
only)
Get: Captures an image and save it as a JPEG file in a PC
card.
Freeze: Freezes and unfreezes images.
Exit: Exits the Capture function.
Unless a PC card is inserted into the PC Card Access slot of the pro-
jector, No Card is displayed. This means that the Capture feature is
not available.
The Card Error display means that the free space of the PC card is
insufficient for saving images. Make more space available on the card
by erasing unwanted images with your PC. The number of images
that can be captured depends on the size of the PC card.
NOTE: Be sure not to turn off the power or remove the PC card
while capturing an image. Doing so could cause a loss of the data in
the PC card or damage to the card itself.
NOTE: Captured images with higher resolution than the projectors
native resolution cannot be displayed correctly.
Selecting ÒExecuteÓ displays the file you selected.
ChalkBoard (available only when using with USB mouse)
Provides the tool bar for producing freehand drawings.
Pen: Left-click and drag to draw. Right-click to display the
pen palette containing four lines of different thickness
from which you can select a line you prefer by left-
clicking.
Erase: Left-click and drag to erase part of a drawing. Right-
click to display the eraser palette containing four eraser
of different thickness from which you can select an
eraser you prefer by left-clicking.
Clear: Clears the drawing completely from the ChalkBoard
screen.
Color: Selects a color. Left-click to display the color palette
from which you can select a color you prefer by left-
clicking.
View: Hides the tool bar by left-clicking. Right-clicking any-
where on the screen displays the ChalkBoard tool bar
again.
Exit: Clears the complete drawing and exits the ChalkBoard.
NOTE:
* The ChalkBoard feature is available only when a USB mouse is used. Free-
hand drawings cannot be saved or captured.
* The main menu is not available while you display the ChalkBoard screen.
* The Capture and the Source Display function are not available on
ChalkBoard screen.
* Switching slides clears a drawing completely.
* Selecting BMP and JPEG files automatically switches to the PC Card
Viewer source.
Help
Contents
Provides an online help about how to use
the menus. An undelined link means that
you can move to an adjustment item di-
rectly. Selecting the underlined link and
pressing ENTER moves to the corre-
sponding adjustment item.
Source Information
Displays the status of the current signal.
This dialog box has three pages.
Projector Information
Displays the lamp usage hours. The tool bar includes the following buttons: 
						

							EÐ26
Using the PC Card Viewer function
NOTE:
When using the supplied software (CD-ROM)
The software is designed to use with a personal computer only. Do
not play the software on CD player. Doing so could cause damage to
speakers.
Features
The Viewer feature allows slides stored on a PC card to be displayed
on the projector.  Even if no computer is available, presentations can
be conducted simply with the projector.  This feature is convenient
for holding presentations at meetings and in offices, as well as for
playing images taken on digital cameras.
Easy to use
¥ Presentations can be started immediately simply by inserting a
PC card (not supplied)
¥ Easy slide switching
¥ Remote control operation
¥ Jumping to list of slides or any specific slide
High quality images
¥ High resolution up to 10242768 dots(MT840: up to 8002600
dots)
¥ 24-bit full color playback
¥ Viewing of digital camera images
Simpl utility software (for computer)
¥ PC Card Viewer software operable on Windows 95/NT
¥ Slides can be created by capturing the currently displayed im-
age
¥ Control screen for displaying lists of slides and editing
¥ Automatic slide conversion of files created with Microsoft
PowerPoint 95 and 97
* Microsoft, Windows and PowerPoint are registered trademarks
of Microsoft Corporation.
Inserting and Ejecting the PC Card
The PC card is used to view presentation data prepared on the com-
puter and to capture and play images projected with the projector.
Eject button
Inserting the PC Card
¥ Hold the PC card horizontally and insert it slowly into card slot
with its top facing up.
¥ The eject button pops out once the PC card is fully inserted.
Check that the PC card is fully inserted.
NOTE:  Do not try to force the PC card into the slot.
Ejecting the PC Card
Press the eject button.  The PC card pops out a little.  Grasp the edges
of the PC card and pull it out.  Do not eject the PC card while its data
is being accessed.
Direction for Inserting the PC Card
The PC card has a top and bottom and must be inserted into the
PC card slot in a specific direction.  It cannot be inserted back-
wards or upside-down.  Attempting to force it into the slot in the
wrong direction may break the internal pin and damage the  card
slot.  Refer to the PC cards operating instructions for the proper
direction of insertion.
PC Card Type
The PC Card Access slot accepts PCMCIA Type II. 
						

							EÐ27
Installing the PC Card Viewer Software
Before Installing
Perform the following before installing the PC Card Viewer software:
¥ If Windows95 is already started, exit all applications.  Installa-
tion may not be performed properly if any applications are run-
ning.
Installation
Install the viewer software as described below.
To quit installation before it is completed, press the Cancel button
then follow the instructions in the dialog box.
1. Start up Windows95.
2. Insert the CD-ROM into the CD-ROM drive.
The auto CD play function automatically starts the CD-ROMs
program and the contents screen appears.
Starting Up the PC Card Viewer Software on your PC
(PC Card Viewer Utility 1.0)
Use the PC Card Viewer Utility 1.0 for creating viewer slides.
To start the PC Card Viewer software:
* Select [Start]-[Programs]-[NEC PROJECTOR TOOLS]-[PC
Card Viewer Utility 1.0].
Contents of the English version PC Card Viewer software
(PC Card Viewer Utility 1.0)
This is the software used for creating PC Card Viewer slides.  In
this manual it is referred to as the PC Card Viewer software.
PC CARD VIEWER PPT CONVERTER 3.0
This is an application that converts files created with Microsoft
PowerPoint 95 or 97 into indexes so that they can be played di-
rectly with the PC Card Viewer Utility 1.0.
PC Card Viewer PPT Converter is installed automatically when
you install the PC Card Viewer Utility.
To start PC Card Viewer PPT Converter:
* Select PC Card Viewer PPT Converter from NEC PROJECTOR
TOOLS.
Basic Operation of the PC Card Viewer Software
PC Card Viewer Utility is an application for editing documents, con-
verting them into slides and storing them on PC cards as playback
data (indexes) for presentations using projectors.
Refer to online help for instructions on using the PC Card Viewer
software.
 * The auto CD play function operates if the Auto insert notifica-
tion box in the computers CD-ROM control panel is checked.
(The box is checked by default.)
3. Click [Installing the PC Card Viewer Utility 1.0]
The setup dialog appears.
* Follow the instructions in the setup dialog to complete the in-
stallation.
For instructions on uninstalling the PC Card Viewer software, see
page E-31. 
						

							EÐ28
Operating the PC Card Viewer Function from
the Projector (playback)
This section describes the operation for showing slides of presenta-
tion documents created using the PC Card Viewer function with the
projector.
It is also possible to make slides directly from the images projected
with the projector.
Projecting slides
1.  Insert a PC card into the  card slot.
Insert the PC card with the side with the insertion direction arrow
on the top.
 *  Press the eject button to eject the card.
2.  Select the ÒPC Card ViewerÓ from the input menu.
1) Press the MENU button to display the main menu, use the s
and t buttons to select the Source Select, then press the © but-
ton to display the source menu.
2) Select the ÒViewerÓ using the s and t  buttons.
Source Select
RGB 1
RGB 2
Video
S-Video
PC Card Viewer
3.  Projector slides.
Checking ÒShow Folder ListÓ means that selecting PC Card
Viewer input displays a list of the folders in the PC card and if
ÒAuto PlayÓ is checked the projector automatically starts to play
slides at the first slide of the folder you have selected.
When selecting ÒShow Folder ListÓ or ÒManual PlayÓ while
the ÒAuto PlayÓ feature is not checked, and you select PC Card
Viewer for the input source,  you can manually advance to the
next slide or the preivious slide. See page E-24 for more details.
Drag
Prev
Next
Play/Stop
Jump
Select
DeleteView
A tool bar will appear when you press the MENU button on the re-
mote control or the projector cabinet or clicking with the right button
of a mouse.
NOTE:To use the tool bar, press the Computer/Projector Select but-
ton so that you can be in the Projector mode and the button can light
in red.
The tool bar includes the following buttons:Drag: Drags to move the tool bar. This is available for USB
mouse operation only.
Prev: Returns to the previous slide or folder. Or this lets
you play slides back in reverse.
Next: Advances to the next slide or folder. Or this lets you
play slides back.
Play: Play/Stop: Plays back automatically or manually de-
pending on the setting on PC Card Viewer Options of
the menu. This allows you to stop Auto Play while
you are playing back and to resume playing from the
selected slide or folder when ÒAuto PlayÓ is selected.
This allows you to move on to the next slide when
ÒManual PlayÓ is selected.
Jump: Displays a list of slides while you are playing back.
Select: Displays a list of folders while you are playing back.
Delete: Deletes a captured slide(s) or all the captured slides
in the Capture Ð specific folder.
View: Hides the tool bar while you are playing back. Press-
ing the MENU button or clicking with the right but-
ton of a mouse shows it again.
NOTE:
* The tool bar for PC Card Viewer is not available if you display the
ChalkBoard and the Capture tools, and Main menu using the re-
mote control.
When using a USB mouse you can display the ChalkBoard tool
bar, the Capture tool bar and Main menu as well as the PC Card
Viewer tool bar.
* The tool bar is operated with buttons on the remote control, cabi-
net, and USB mouse.
If no memory card is inserted in the PC CARD ACCESS slot, there is
no signal, and a black, blue or logo background is displayed, de-
pending on the setting.
Playback is stopped when § or © on the remote control or the cabi-
net is pressed in Auto Play mode.
NOTE: Up to 12 indexes can be displayed on the list of folders. The
folder in the right bottom is always a folder exclusively for captured
images, but is only displayed when images have been captured. To
display the list of folders when there are 13 or more indexes stored on
the PC card, select Edit index from the PC Card Viewer softwares
File menu and move the index you want to display to within 12
indexes from the top of the folder index. For details on indexes, refer
to the PC Card Viewer softwares help folder. 
						

							EÐ29
Auto Play Mode
¥ If the ÒAuto PlayÓ option is selected in ÒPC Card Viewer Op-
tionsÓ of the menu, any given slide will start to play automati-
cally. You can also specify Auto Play Interval between 5 and 300
seconds.
Switching to Slides Directly from Other Input Modes
With this function it is possible to switch directly to a slide when the
picture of a VCR or computer is being projected.
Example:
When conducting presentations using a combination of slides and
moving pictures from a VCR, etc., it is possible to switch from a PC
Card Viewer slide to the video picture then back to the PC Card  Viewer
slide simply by using the Source button.
NOTE: Even if you switch the current PC Card Viewer source to
another source, the current slide is retained. When you return back to
the PC Card Viewer, you will get the slide that has been retained.
SOURCE AUTO ADJ.
COMPUTER PROJECTOR
POWER
PJ
SA
OFF ON
NOTE: The PC card editing operation cannot be performed from the
projector.  Do so using the PC Card Viewer software.
FolderFolder Folder Folder
Folder
Multi cursor (blue marks)
Folder
SlideSlide Slide Slide
Slide
SlideSlideSlide
Slide(Table) cursor (yellow marks)
Slide
When the tool bar is not displayed, use the § or © button to advance
to the next  folder or return to the previous folder.
When the tool bar is not displayed, use the § or © button to advance
to the next slide or return to the previous slide.
When the tool bar is not displayed:
NOTE: To use the § or © button to advance to the next slide or
folder, or return to the previous slide or folder, you must be in the
Projector mode.
To be in the Projector mode, press the Computer/Projector Select
button and the button lights in red. 
						

							EÐ30
Capturing Images Displayed on the Projector
Storing images displayed on the projector on the PC
card
Preparations:
Insert the PC card into the card slot.
Insert the PC card with the side with the insertion direction ar-
row on the top.
* Press the eject button to eject the card.
1. Project the image you wish to store on the projector.
2. Select the ÒCaptureÓ from the Tools menu.
NOTE:
¥ File size of the captured image varies depending on the resolution
of an input signal.
¥ Since an image data is compressed with the JPEG format, the im-
age is slightly degraded.
NOTE: An hourglass indicating that an image is being captured ap-
pears on the projectors display.  Do not eject the PC card or turn off
the projectors power while this icon is displayed.  Doing so will
damage the PC card data.
If the PC card data is damaged, use a computer to repair the data.
NOTE: The folder in the right bottom is always a folder exclusively
for captured images. To display the list of folders when there are 13
or more indexes stored on the PC card, select Edit index from the
PC Card Viewer softwares File menu and move the index you want
to display to within 12 indexes from the top of the folder index. For
details on indexes, refer to the PC Card Viewer softwares help file.
CaptureExit
Freeze
Drag
Tools
Capture
PC Card Files
ChalkBoard
3. A tool bar will appear.
The tool bar includes the following buttons:
Drag: Drags to move the tool bar (for USB mouse operation
only).
Capture:Captures an image and save it as a JPEG file in a PC
card.
Freeze: Freezes and unfreezes images.
Exit: Exits the Capture function. Another option to exit the
Capture function is to press MENU or CANCEL but-
ton on the remote control or projector cabinet.
* The tool bar for Capture is not available if you display the
ChalkBoard and the PC Card Viewer tools, and Main menu using
the remote control.
When using a USB mouse you can display the ChalkBoard and
the PC Card Viewer tools, and Main menu as well as the Capture
tool bar.
NOTE: You can compress a captured file (JPEG) using the Cap-
ture Options in the Setup dialog. See page E-24.
NOTE: Captured images with higher resolution than the
projectors native resolution cannot be displayed correctly.