NEC Mt1000 Projector Users Manual

21
Changing Video Resolutions
Depending on your computers graphic capability, you may be able
to select one of several resolutions. Generally a computer- either a
PC or Macintosh- with 1 meg. of memory will run:
6402480 at 16.7 million colors (24 bit Truecolor)
8002600 at 65 thousand colors.
10242768 at 256 colors.
As the resolution increases,  the number of colors you can run
decreases.  With 2 meg. of memory a computer will run:
6402480 at 16.7 million colors (24 bit Truecolor).
8002600 at 16.7 million...

22
Connecting Your Document Camera
You can connect your MultiSync MT1000 LCD Projector to a document camera. To do so, simply:
1. Turn off the power to your LCD projector and document camera.
2. Use a standard video cable to connect your document camera to the Video input on your projector.
3. Turn on the LCD projector and the document camera.
NOTE:   Refer to your document cameras owners manual for more information about your cameras
video output requirements .
Connecting Your VCR Or Laser Disc Player...

23
Connecting Your Remote Mouse Receiver
The remote mouse receiver enables you to operate your computers mouse functions from the NEC
MultiSync MT1000 remote control. It is a great convenience for clicking through your computer-
generated presentations.
To connect the remote mouse receiver:
1. Turn off your computer.
2. For PCs: Remove your current mouse and connect the serial cable from the remote mouse
receiver to your PCs mouse port. (Use the 6-pin adapter for connecting to a PS/2 computer.)
For...

24
mThe Remote Mouse Receiver as a mouse for your computer
Serial cable (supplied)
mThe Remote sensors on the projector cabinet work as the remote sensor on the Remote
Mouse Receiver
Remote cable
(supplied)
mYou can daisy-chain as many as five LCD projectors and operate them with the same
remote control. To do so:
1. Turn off your projectors.
2. Use the remote control cables supplied to connect the Remote Control Output of one projector to the Remote
Control Input of the next until all the projectors are...

25
This section describes how to select a computer or video source and how to adjust the
picture and sound.
General Controls Before you turn on your MultiSync MT1000 LCD Projector,
ensure that the computer or video source is turned on and that your lens cap is removed.
1.Turn On The LCD Projector The main power switch is on the back panel of the
MultiSync MT1000 LCD Projector. By turning this switch on, the projector will go
into its standby mode and the power light will glow amber. Only after you press...

26
Using The Menus
1. Press the Menu button on the remote control or projector cabinet to display the Main Menu.
2. Press the Select button on the projector cabinet or (s) (t) buttons on your remote control to highlight the menu for the item you want
to adjust.
3. Press the Enter button on the projector cabinet or the Left Click button on the remote control to select a submenu or item.
4. Adjust the level or turn the selected item on or off by using the Adjust (+) or (Ð) buttons on the remote control or...

27
Menu Descriptions & Functions
Source Menu
RGB 1
Selects the computer connected to your RGB 1 input. Use the Adjust (+) or (Ð) buttons to
select a standard* or one of six** custom settings you can create. Press the Enter button
on the cabinet or the Left Click button on the remote control to save your selection.
RGB 2
Selects the computer connected to your RGB 2 input. Use the Adjust (+) or (Ð) buttons to
select a standard* or one of six** custom settings you can create. Press the ÒEnterÓ button
on the...

28
Image Adjustment
Menu
Color*
 Use the ÒAdjustÓ (+) or (Ð) buttons to adjust the color.
Tint*
Use the ÒAdjustÓ (+) or (Ð) buttons to adjust the tint.
Sharpness*
Use the ÒAdjustÓ (+) or (Ð) buttons to adjust the sharpness.
Image Mode*
Use the ÒAdjustÓ (+) or (Ð) buttons to choose ÒNormalÓ for a regular picture ÒNaturalÓ for
true color reproduction, or ÒDocument CameraÓ for a document camera or other low APL
picture.
OPERATION
53
54 Provides access to controls for your image and sound. Use the ÒSelectÓ...

29
Fine Picture ..(when AUTO PICTURE is off)
Use this icon to adjust the clock phase or to reduce video noise, dot interference or cross
talk. (This is evident when part of your image appears to be shimmering.) Use the ÒAdjustÓ
(+) and (Ð) buttons to adjust the image. Use the Fine Adjustment only after the Picture
Adjustment is complete. This adjustment is made automatically when the Auto Picture is
turned on.
NOTE:
,Color, Tint, Sharpness and Image Mode controls will not work with an RGB source. The...

30
Provides access to Lamp Usage information and the Auto Start and Power Management
features. Use the ÒSelectÓ button on the projector cabinet or (s) (t) buttons on your remote
control to access a submenu. Then press ÒAdjustÓ (+) or (Ð) to choose a specific option.
Lamp Usage
This tells you how long the lamp has been in operation. It is recommended that you replace a
lamp after 2000 hours of service. After you install a new lamp, select this icon and press and
hold the ÒPower OnÓ button on the remote...