Home > NEC > PDAs > NEC MobilePro 780 Portable Computer Users Guide

NEC MobilePro 780 Portable Computer Users Guide

    Download as PDF Print this page Share this page

    Have a look at the manual NEC MobilePro 780 Portable Computer Users Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							  
    Troubleshooting  A-1 
     
    Troubleshooting 
    Your NEC MobilePro is designed to provide many hours 
    of service while you are at home or on the road. 
    For optimum performance, frequently back up and syn-
    chronize the MobilePro data with your notebook or desk-
    top computer. Then if something happens, most of your 
    data is still available. If you have problems, check the in-
    formation in the following table for possible solutions. 
    Troubleshooting
     
    PROBLEM RESOLUTION 
    The MobilePro 
    has no power. Check the main battery.  
    If you are using an AC adapter, make sure 
    the connections are correct and secure. 
     
    Make sure the battery bay release lock is in 
    the locked position. 
     
    Check that the ROM bay cover is properly 
    secure. 
    Nothing 
    appears on the 
    screen. Try pressing the Power button again (the 
    unit might have turned itself off if it was not 
    used for a specified time). 
     
    Adjust the contrast.  
    Check the power connections. 
     
    Troubleshooting (contd) 
    PROBLEM RESOLUTION 
    A  
    						
    							  
    A-2  Troubleshooting 
    Nothing 
    appears on the 
    screen. (contd) Try recharging the main battery pack. 
     
    Check that the ROM bay cover is properly 
    secure. 
    A low battery 
    message 
    appears. Recharge the main battery. 
    W hen using a 
    PC card, such 
    as a modem, 
    the unit powers 
    off. Connect the AC adapter to the unit when 
    using PC cards that require large amounts 
    of energy. 
    The AC adapter 
    doesnt work. Make sure that the main battery is installed. 
     
    Check that the AC adapter connections are 
    secure. 
     
    Verify that the AC outlet being used is 
    working. Do this by plugging in another 
    electric device, such as a lamp. 
    The keyboard 
    doesnt 
    respond. Reset the unit. 
     
    If you have installed handwriting recognition 
    software, be sure that you have not set the 
    “disable keyboard” parameter in that 
    software. 
    The serial port 
    doesn’t work. Check that the cable connections are 
    secure. 
    The IrDA port 
    doesn’t work. Check that nothing obstructs the path 
    between the transmitting and receiving IR 
    ports. 
     
    Check the information in “Using the IR Port,” 
    in the NEC MobilePro 780 User’s Guide. 
      
     
    Troubleshooting (contd) 
    PROBLEM RESOLUTION  
    						
    							  
    Troubleshooting  A-3 
    The PC card 
    cannot be 
    accessed. Make sure the card is inserted correctly and 
    seated properly. 
     
    Connect the unit to AC power using the 
    adapter. Some cards do not operate 
    properly unless the AC adapter is 
    connected. 
    The touch 
    screen does not 
    respond. Press Ctrl Alt =
     to calibrate the stylus input. 
    Follow the on-screen instructions to 
    complete the recalibration procedure. 
     
    Reset the unit. 
    The soft reset 
    button does not 
    respond. Remove the main battery. Reinstall the 
    battery and make sure it is seated properly. 
    Try resetting the unit again. 
     
    If the soft reset button on the bottom of the 
    system does not respond, you may have to 
    use the full reset button inside the battery 
    bay. Refer to the section, “Resetting the 
    MobilePro,” in Chapter 4 of the user’s guide. 
     
    This second procedure may result in the 
    loss of the memory contents including all 
    stored data, settings, and files. 
     
    Be sure to make regular backups. 
     
      For further assistance, call NECC Support Services at 
    1-800-632-4525 
     Note: If you purchased this computer outside of 
    the U.S. and Canada, please contact the local NECC 
    office or their dealers for service and support.  
    						
    							  
    Specifications B-1 
     
    Specifications 
    The following specifications are standard except where 
    noted. 
    Display 
    8.1-inch, 640 x 240, 64K color, liquid crystal display 
    (LCD), with backlight, touch screen 
    CPU 
    NEC VR4121, 168-MHz processor,  
    optimized for Windows CE 
    User Data Entry Methods 
    !
    78-key QWERTY keyboard with stylus 
    !17.5 mm alpha key pitch 
    !Touch screen (input via stylus) 
    !Scroll (Jog) dial 
    Random Access Memory (RAM) 
    32 megabytes (MB); standard 
    Read-Only Memory (ROM) 
    24 megabytes MB; replaceable 
    Speaker 
    One built-in speaker 
    B  
    						
    							  
    B-2 Specifications 
    Infrared (IrDA) Communication 
    !
    Baud rate — FIR 4 Mbps maximum 
    !Distance — 2 to 20 inches 
    Serial Interface 
    Baud rate — 115.2 Kbps maximum 
    I/O Ports 
    !
    Serial port (Direct Cable connection) 
    !IrDA port 
    !VGA port (output) 
    !Earphone Microphone 
    !Modem port 
    !Power port (DC in) 
    Modem 
    !
    Data — V. 90, 56 Kbps (AT command) 
    !Fax — 14.4 Kbps (Fax control command Class I) 
     Note: Download speed is limited to 53 Kbps. 
    Upload speed is limited to 33.6 Kbps. Actual speeds 
    may vary depending upon line conditions.  
    The built-in modem requires a compatible service 
    provider. 
    PC Card Slot 
    One Type I or Type II PC card slot 
    Compact Flash Card Slot 
    One Type I or Type II Compact Flash card slot  
    						
    							  
    Specifications B-3 
    Power 
    !
    AC Adapter 
     Input Voltage — 100 to 240 volts AC, 50 or 60 Hz 
     Output Voltage — 9.0 volts, 1,000mA max. 
    !Main battery — one rechargeable Lithium-Ion (Li-Ion) 
    battery pack (included). 
    !Memory backup — approximately 7 days (with de-
    pleted main battery) at ambient temperature of 73°F 
    (23°C). 
     Note: The period for safe memory backup can 
    vary with ambient temperature and other factors. Al-
    ways make sure that your MobilePro is powered off 
    before you store it. Always recharge your MobilePro 
    as soon as possible after depleting the main battery. 
    Recharge Time 
    !
    Use the AC adapter to recharge the MobilePro main 
    battery and the backup battery. 
    !Recharging time is approximately 4.5 hours when the 
    system is on or off. 
    !The backup battery usually recharges while the main 
    battery is recharging. 
    !Initial charging time for the main battery and the 
    backup battery is approximately 10 hours with the 
    system off. 
    !The system must be charged for 10 hours if the main 
    battery is depleted for a prolonged period.  
    						
    							  
    B-4 Specifications 
    Accessories (ship with the system) 
    !
    AC adapter – S1424-21A Listed Direct Plug-In Power 
    Unit 
     Input Voltage – 100 to 240V AC; 60Hz, 13W 
     Output Voltage – 9V DC 1000 mA 
    !Rechargeable Lithium-Ion Battery Pack 
    !PC Connect (serial) Cable 
    !RJ-11 Telephone Cable 
    !VGA Cable 
    !Stylus 
    Dimensions 
    !
    9.64 in. (w) x 5.2 in. (d) x 1.13 in. (h) 
    !245 mm (w) x 132 mm (d) x 28.8 mm (h) 
    Weight  
    !
    1.69 lb. (with battery) 
    !770 g (with battery) 
    Operating Environment 
    !
    Temperature — 32° to 104°F (0° to 40°C) 
    !Humidity — 35% to 85% (No condensation) 
    Storage Environment 
    !
    Temperature — 14° to 140°F (–10° to 60°C) 
    !Humidity — 35% to 85% (No condensation)  
    						
    							  
    Specifications B-5 
    Available Options 
    !
    AC Adapter (S1424-21A) 
    !AA Battery Adapter (MC-BA10) 
    !PC Connect (serial) Cable (S1424-12S) 
    !VGA Cable(S1424-12V) 
    !Stylus Pack (S1424-17A) 
    !Compact Carrying Case (S1424-30A-D) 
    !Standard Carrying Case (S1424-30A) 
    !Deluxe Carrying Case (290-01500-000) 
    !Li-Ion Battery Pack (MC-BA9) 
    !Earphone Microphone (MC-EM1) 
    !High-Speed Printer Cable (MC-RC3E) 
    !16 MB CompactFlash™ Storage Card 
    (050-00054-000)  
    						
    							   Battery Replacement 
    A lithium battery in some computers maintains system configuration 
    information. In the event that the battery fails to maintain system 
    configuration information, NECC recommends that you replace the battery. 
    For battery replacement information, call your local NECC dealer or the 
    NECC Customer Assistance Center. 
    !WARNING 
    There is a danger of explosion if the battery is incorrectly replaced. 
    Replace only with the same or equivalent type recommended by the 
    manufacturer. Discard used batteries according to the manufacturer’s 
    instructions. 
    !AVERTISSEMENT 
    Il y a danger d’explosion s’il y a replacement incorrect de la batterie. 
    Remplacer uniquement avec une batterie du même type ou d’un type 
    recommandé par le constructeur. Mettre au rébut les batteries usagées 
    conformément aux instructions du fabricant. 
    Battery Disposal 
    The main battery is a Lithium-Ion battery. 
    The sub-battery is a Lithium/Vanadium battery. 
    Do not place used batteries in your regular trash. 
    The incineration, landfilling, or mixing of batteries with the municipal solid 
    waste stream is prohibited by law in most areas. 
    Contact your local waste management officials for other information 
    regarding the environmentally sound collection, recycling, and disposal of 
    used batteries. If you purchased or are using this computer outside of the 
    U.S. or Canada, contact a local NECC dealer in your country.  
    						
    							  
     
    NEC Computers Inc. 
     
     
     
    DECLARATION OF CONFORMITY
     
     
     
    We, the Responsible Party 
     
    NEC Computers Inc. 
    8350 Fruitridge Road 
    Sacramento, CA  95826 
     
     
     
    declare that the product 
     
     
    NEC MobilePro 780 
     
     
    is in conformity with part 15 of the FCC 
    Rules. Operation of this product is subject 
    to the following two conditions: (1) this 
    device may not cause harmful interference, 
    and (2) this device must accept any 
    interference received, including 
    interference that may cause undesired 
    operation. 
     
    Product Type: HandHeld PC 
    Equipment Classification: Class B peripheral  
    						
    All NEC manuals Comments (0)