NEC Mobile Pro 900 Users Guide

 
Using the MobilePro  4-19 
2. The Internal Disk Configuration utility main screen displays the 
currently available free space. Tap the Inspect button to confirm if 
there are any applications whose registry settings are not set to the 
Internal Disk Configuration utility.  
3. If detected, the applications registry setting will automatically set 
to Internal Disk Configuration utility. 
4. Tap OK.  
Note   Each application is placed in its own folder in the HPC Internal 
FlashROM folder, and a...

5 
Setting Up a Remote Connection 
! Preparing for a Connection Setup 
! Connecting the Internal Modem 
! Connecting to an Internet Service Provider 
! Connecting to a Remote Access Server 
! Sending and Receiving E-mail 
! Activating a Connection  

 
5-2 Setting Up a Remote Connection 
Preparing for a Connection Setup 
Before you set up a dial-up connection for an Internet Service Provider 
(ISP) or Remote Access Server (RAS), and the associated e-mail 
properties, you need the following: 
! Modem (your NEC MobilePro is equipped with an internal data/fax 
modem) 
! ISP or RAS account 
! Configuration information from your ISP or network administrator 
that may include some or all of the following: 
— Dial-up telephone number 
— TCP/IP settings 
—...

 
Setting Up a Remote Connection  5-3 
Connecting the telephone cable 
A – Modem Connector 
B – Clip Side of Telephone Cable Connector Goes Here 
Do not connect the internal modem to a 
digital private branch exchange connector, or the digital side of an 
integrated digital network. Use only analog phone connections. 
Failure to do so may result in explosion or fire and will damage 
your modem. 
During thunderstorms be sure to disconnect the modem phone 
cable from the NEC MobilePro. Failure to do so may...

 
5-4 Setting Up a Remote Connection 
Connecting to an Internet Service 
Provider 
Once you have established an account with an Internet Service 
Provider (ISP) and gathered the necessary configuration information, 
you are ready to create a connection on your MobilePro for your ISP 
account. 
Follow these steps to create a new connection for your ISP account. 
1. Tap Start, Programs, Communication, then select Remote 
Networking. 
2. Double tap the Make a New Connection icon. 
3. Enter a name for the...

 
Setting Up a Remote Connection  5-5 
Connecting to a Remote Access Server 
Once you establish an account with your RAS and gather the necessary 
configuration information, you are ready to create a connection on 
your MobilePro for your RAS account. 
Follow these steps to create a new connection for your RAS account. 
1. Tap Start, Programs, Communication, then select Remote 
Networking. 
2. Double tap the Make a New Connection icon. 
3. Enter a name for the new connection. 
4. Select Dial-Up...

 
5-6 Setting Up a Remote Connection 
Sending and Receiving E-mail 
Before configuring the necessary e-mail service information, you need 
some or all of the following settings: 
! POP3 or IMAP4 Host 
! Your user ID 
! Your password, if required 
! SMTP host 
! Your e-mail address. 
To send and receive e-mail through your ISP or RAS account, you 
must configure the services properties through your Inbox. Follow 
these steps to configure the e-mail services information. 
1. Double tap Inbox, tap Services,...

 
Setting Up a Remote Connection  5-7 
! Enter RAS (Exchange server) information as follows: 
—  Either POP3 Host or Server (for IMAP4 mail) — ISP 
host/server name  
— User ID — Domain\your user id\exchange alias 
— Password — Your password, if required 
— SMTP Host — Exchange server name 
— Return Address — Your e-mail address (if in a UNIX 
environment ) 
Note   If you experience difficulty sending e-mail, check your optional 
configuration settings. If you experience difficulty receiving e-mail,...