NEC M352ws Projector Users Manual
Here you can view all the pages of manual NEC M352ws Projector Users Manual. The NEC manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 101
![Page 101
90
5. Using On-Screen Menu
Sample image when the appropriate aspect ratio is automatically determined
M332XS
[Computer signal]
Aspect ratio of incoming signal4:35:416:9 15:916:10
Sample image when the appro-priate aspect ratio is automati-cally determined
[Video signal]
Aspect ratio of incoming signal4:3 Letterbox Squeeze
Sample image when the as-pect ratio is automatically de-
termined
NOTE: To display a squeezed signal prop-erly, select [16:9] or [WIDE ZOOM].
M352WS/M302WS
[Computer signal]...](http://img.usermanuals.tech/thumb/54/91915/w300_nec-m352ws-manual_d-100.png "Page 101
90
5. Using On-Screen Menu
Sample image when the appropriate aspect ratio is automatically determined
M332XS
[Computer signal]
Aspect ratio of incoming signal4:35:416:9 15:916:10
Sample image when the appro-priate aspect ratio is automati-cally determined
[Video signal]
Aspect ratio of incoming signal4:3 Letterbox Squeeze
Sample image when the as-pect ratio is automatically de-
termined
NOTE: To display a squeezed signal prop-erly, select [16:9] or [WIDE ZOOM].
M352WS/M302WS
[Computer signal]...")
90 5. Using On-Screen Menu Sample image when the appropriate aspect ratio is automatically determined M332XS [Computer signal] Aspect ratio of incoming signal4:35:416:9 15:916:10 Sample image when the appro-priate aspect ratio is automati-cally determined [Video signal] Aspect ratio of incoming signal4:3 Letterbox Squeeze Sample image when the as-pect ratio is automatically de- termined NOTE: To display a squeezed signal prop-erly, select [16:9] or [WIDE ZOOM]. M352WS/M302WS [Computer signal]...
Page 102
![Page 102
91
5. Using On-Screen Menu
Turning on Noise Reduction [NOISE REDUCTION]
This function allows you to select the level of noise reduction.
The projector is set to the optimized level for each signal at the factory.
Select your preference item for your signal when video noise is noticeable.
The options are [OFF], [LOW], [MEDIUM], and [HIGH].
NOTE: This feature is not available for the RGB signal. Noise reduction set to off gives best image quality by way of higher bandwidth.
Noise reduction...](http://img.usermanuals.tech/thumb/54/91915/w300_nec-m352ws-manual_d-101.png "Page 102
91
5. Using On-Screen Menu
Turning on Noise Reduction [NOISE REDUCTION]
This function allows you to select the level of noise reduction.
The projector is set to the optimized level for each signal at the factory.
Select your preference item for your signal when video noise is noticeable.
The options are [OFF], [LOW], [MEDIUM], and [HIGH].
NOTE: This feature is not available for the RGB signal. Noise reduction set to off gives best image quality by way of higher bandwidth.
Noise reduction...")
91 5. Using On-Screen Menu Turning on Noise Reduction [NOISE REDUCTION] This function allows you to select the level of noise reduction. The projector is set to the optimized level for each signal at the factory. Select your preference item for your signal when video noise is noticeable. The options are [OFF], [LOW], [MEDIUM], and [HIGH]. NOTE: This feature is not available for the RGB signal. Noise reduction set to off gives best image quality by way of higher bandwidth. Noise reduction...
Page 103
![Page 103
92
5. Using On-Screen Menu
❻ Menu Descriptions & Functions [SETUP]
[GENERAL]
Using Digital Zoom [DIGITAL ZOOM]
This feature allows you to electronically fine adjust the image size on the screen. Use the ◀ or ▶ button to large or
reduce the projected image.
TIP: To adjust the projected image size roughly, move the projector away or closer to the screen. To fine adjust the zoom, use the
[DIGITAL ZOOM] function. (→ page 22)
Enabling Auto Keystone [AUTO KEYSTONE]
This feature allows...](http://img.usermanuals.tech/thumb/54/91915/w300_nec-m352ws-manual_d-102.png "Page 103
92
5. Using On-Screen Menu
❻ Menu Descriptions & Functions [SETUP]
[GENERAL]
Using Digital Zoom [DIGITAL ZOOM]
This feature allows you to electronically fine adjust the image size on the screen. Use the ◀ or ▶ button to large or
reduce the projected image.
TIP: To adjust the projected image size roughly, move the projector away or closer to the screen. To fine adjust the zoom, use the
[DIGITAL ZOOM] function. (→ page 22)
Enabling Auto Keystone [AUTO KEYSTONE]
This feature allows...")
92 5. Using On-Screen Menu ❻ Menu Descriptions & Functions [SETUP] [GENERAL] Using Digital Zoom [DIGITAL ZOOM] This feature allows you to electronically fine adjust the image size on the screen. Use the ◀ or ▶ button to large or reduce the projected image. TIP: To adjust the projected image size roughly, move the projector away or closer to the screen. To fine adjust the zoom, use the [DIGITAL ZOOM] function. (→ page 22) Enabling Auto Keystone [AUTO KEYSTONE] This feature allows...
Page 104
![Page 104
93
5. Using On-Screen Menu
Using the Wall Color Correction [WALL COLOR]
This function allows for quick adaptive color correction in applications where the screen material is not white.
NOTE:
• Selecting [WHITEBOARD] reduces lamp brightness.
• The [WALL COLOR] item cannot be selected when [ON] is selected for [3D] while images are projected.
Setting various items related to lamp brightness [ECO SETTINGS]
This option allows you to decrease the power consumption or to prolong the lamp life by...](http://img.usermanuals.tech/thumb/54/91915/w300_nec-m352ws-manual_d-103.png "Page 104
93
5. Using On-Screen Menu
Using the Wall Color Correction [WALL COLOR]
This function allows for quick adaptive color correction in applications where the screen material is not white.
NOTE:
• Selecting [WHITEBOARD] reduces lamp brightness.
• The [WALL COLOR] item cannot be selected when [ON] is selected for [3D] while images are projected.
Setting various items related to lamp brightness [ECO SETTINGS]
This option allows you to decrease the power consumption or to prolong the lamp life by...")
93 5. Using On-Screen Menu Using the Wall Color Correction [WALL COLOR] This function allows for quick adaptive color correction in applications where the screen material is not white. NOTE: • Selecting [WHITEBOARD] reduces lamp brightness. • The [WALL COLOR] item cannot be selected when [ON] is selected for [3D] while images are projected. Setting various items related to lamp brightness [ECO SETTINGS] This option allows you to decrease the power consumption or to prolong the lamp life by...
Page 105
![Page 105
94
5. Using On-Screen Menu
ECO OPTION
Set the option when [ECO] is selected for [ECO MODE].
CONSTANT BRIGHTNESS:
OFF ������������������������The CONSTANT BRIGHTNESS feature will not work� The lamp brightness will gradually decrease over long
periods of time�
ON �������������������������The lamp brightness will increase according to the lamp use of time and will be kept at the lamp brightness
equivalent to the brightness at ECO � After the lamp brightness reaches the maximum, the lamp brightness will...](http://img.usermanuals.tech/thumb/54/91915/w300_nec-m352ws-manual_d-104.png "Page 105
94
5. Using On-Screen Menu
ECO OPTION
Set the option when [ECO] is selected for [ECO MODE].
CONSTANT BRIGHTNESS:
OFF ������������������������The CONSTANT BRIGHTNESS feature will not work� The lamp brightness will gradually decrease over long
periods of time�
ON �������������������������The lamp brightness will increase according to the lamp use of time and will be kept at the lamp brightness
equivalent to the brightness at ECO � After the lamp brightness reaches the maximum, the lamp brightness will...")
94 5. Using On-Screen Menu ECO OPTION Set the option when [ECO] is selected for [ECO MODE]. CONSTANT BRIGHTNESS: OFF ������������������������The CONSTANT BRIGHTNESS feature will not work� The lamp brightness will gradually decrease over long periods of time� ON �������������������������The lamp brightness will increase according to the lamp use of time and will be kept at the lamp brightness equivalent to the brightness at ECO � After the lamp brightness reaches the maximum, the lamp brightness will...
Page 106
![Page 106
95
5. Using On-Screen Menu
[MENU]
Selecting Menu Color [COLOR SELECT]
You can choose between two options for menu color: COLOR and MONOCHROME.
Turning On / Off Source Display [SOURCE DISPLAY]
This option turns on or off input name display such as COMPUTER, HDMI1, HDMI2, VIDEO, USB-A, LAN, USB-B,
to be displayed on the top right of the screen.
When no input signal is present, the no-signal guidance prompting you to check for an available input will be displayed
at the center of the...](http://img.usermanuals.tech/thumb/54/91915/w300_nec-m352ws-manual_d-105.png "Page 106
95
5. Using On-Screen Menu
[MENU]
Selecting Menu Color [COLOR SELECT]
You can choose between two options for menu color: COLOR and MONOCHROME.
Turning On / Off Source Display [SOURCE DISPLAY]
This option turns on or off input name display such as COMPUTER, HDMI1, HDMI2, VIDEO, USB-A, LAN, USB-B,
to be displayed on the top right of the screen.
When no input signal is present, the no-signal guidance prompting you to check for an available input will be displayed
at the center of the...")
95 5. Using On-Screen Menu [MENU] Selecting Menu Color [COLOR SELECT] You can choose between two options for menu color: COLOR and MONOCHROME. Turning On / Off Source Display [SOURCE DISPLAY] This option turns on or off input name display such as COMPUTER, HDMI1, HDMI2, VIDEO, USB-A, LAN, USB-B, to be displayed on the top right of the screen. When no input signal is present, the no-signal guidance prompting you to check for an available input will be displayed at the center of the...
Page 107
![Page 107
96
5. Using On-Screen Menu
Selecting Menu Display Time [DISPLAY TIME]
This option allows you to select how long the projector waits after the last touch of a button to turn off the menu. The
preset choices are [MANUAL], [AUTO 5 SEC], [AUTO 15 SEC], and [AUTO 45 SEC]. The [AUTO 45 SEC] is the fac-
tory preset.
Selecting a Color or Logo for Background [BACKGROUND]
Use this feature to display a blue/black screen or logo when no signal is available. The default...](http://img.usermanuals.tech/thumb/54/91915/w300_nec-m352ws-manual_d-106.png "Page 107
96
5. Using On-Screen Menu
Selecting Menu Display Time [DISPLAY TIME]
This option allows you to select how long the projector waits after the last touch of a button to turn off the menu. The
preset choices are [MANUAL], [AUTO 5 SEC], [AUTO 15 SEC], and [AUTO 45 SEC]. The [AUTO 45 SEC] is the fac-
tory preset.
Selecting a Color or Logo for Background [BACKGROUND]
Use this feature to display a blue/black screen or logo when no signal is available. The default...")
96 5. Using On-Screen Menu Selecting Menu Display Time [DISPLAY TIME] This option allows you to select how long the projector waits after the last touch of a button to turn off the menu. The preset choices are [MANUAL], [AUTO 5 SEC], [AUTO 15 SEC], and [AUTO 45 SEC]. The [AUTO 45 SEC] is the fac- tory preset. Selecting a Color or Logo for Background [BACKGROUND] Use this feature to display a blue/black screen or logo when no signal is available. The default...
Page 108
![Page 108
97
5. Using On-Screen Menu
[INSTALLATION]
Selecting Projector Orientation [ORIENTATION]
This reorients your image for your type of projection. The options are: desktop front projection, ceiling rear projection,
desktop rear projection, and ceiling front projection.
DESKTOP FRONTCEILING REAR
DESKTOP REARCEILING FRONT
Disabling the Cabinet Buttons [CONTROL PANEL LOCK]
This option turns on or off the CONTROL PANEL LOCK function.
NOTE:
• This CONTROL PANEL LOCK does not affect the remote control...](http://img.usermanuals.tech/thumb/54/91915/w300_nec-m352ws-manual_d-107.png "Page 108
97
5. Using On-Screen Menu
[INSTALLATION]
Selecting Projector Orientation [ORIENTATION]
This reorients your image for your type of projection. The options are: desktop front projection, ceiling rear projection,
desktop rear projection, and ceiling front projection.
DESKTOP FRONTCEILING REAR
DESKTOP REARCEILING FRONT
Disabling the Cabinet Buttons [CONTROL PANEL LOCK]
This option turns on or off the CONTROL PANEL LOCK function.
NOTE:
• This CONTROL PANEL LOCK does not affect the remote control...")
97 5. Using On-Screen Menu [INSTALLATION] Selecting Projector Orientation [ORIENTATION] This reorients your image for your type of projection. The options are: desktop front projection, ceiling rear projection, desktop rear projection, and ceiling front projection. DESKTOP FRONTCEILING REAR DESKTOP REARCEILING FRONT Disabling the Cabinet Buttons [CONTROL PANEL LOCK] This option turns on or off the CONTROL PANEL LOCK function. NOTE: • This CONTROL PANEL LOCK does not affect the remote control...
Page 109
![Page 109
98
5. Using On-Screen Menu
Selecting Communication Speed [COMMUNICATION SPEED]
This feature sets the baud rate of the PC Control port (D-Sub 9P). It supports data rates from 4800 to 38400 bps. The
default is 38400 bps. Select the appropriate baud rate for your equipment to be connected (depending on the equip-
ment, a lower baud rate may be recommended for long cable runs).
NOTE: Your selected communication speed will not be affected even when [RESET] is done from the menu.
Setting...](http://img.usermanuals.tech/thumb/54/91915/w300_nec-m352ws-manual_d-108.png "Page 109
98
5. Using On-Screen Menu
Selecting Communication Speed [COMMUNICATION SPEED]
This feature sets the baud rate of the PC Control port (D-Sub 9P). It supports data rates from 4800 to 38400 bps. The
default is 38400 bps. Select the appropriate baud rate for your equipment to be connected (depending on the equip-
ment, a lower baud rate may be recommended for long cable runs).
NOTE: Your selected communication speed will not be affected even when [RESET] is done from the menu.
Setting...")
98 5. Using On-Screen Menu Selecting Communication Speed [COMMUNICATION SPEED] This feature sets the baud rate of the PC Control port (D-Sub 9P). It supports data rates from 4800 to 38400 bps. The default is 38400 bps. Select the appropriate baud rate for your equipment to be connected (depending on the equip- ment, a lower baud rate may be recommended for long cable runs). NOTE: Your selected communication speed will not be affected even when [RESET] is done from the menu. Setting...
Page 110
![Page 110
99
5. Using On-Screen Menu
Using Test Pattern [TEST PATTERN]
Displays the test pattern to check for image distortion at the time of the projector setup. Press the ENTER button to
display the test pattern; press the EXIT button to close the test pattern and return to the menu. Menu operation and
keystone correction are not possible when the test pattern is displayed.
Selecting Microphone Type [MIC SELECT]
This feature allows you to select dynamic or condenser type for your...](http://img.usermanuals.tech/thumb/54/91915/w300_nec-m352ws-manual_d-109.png "Page 110
99
5. Using On-Screen Menu
Using Test Pattern [TEST PATTERN]
Displays the test pattern to check for image distortion at the time of the projector setup. Press the ENTER button to
display the test pattern; press the EXIT button to close the test pattern and return to the menu. Menu operation and
keystone correction are not possible when the test pattern is displayed.
Selecting Microphone Type [MIC SELECT]
This feature allows you to select dynamic or condenser type for your...")
99 5. Using On-Screen Menu Using Test Pattern [TEST PATTERN] Displays the test pattern to check for image distortion at the time of the projector setup. Press the ENTER button to display the test pattern; press the EXIT button to close the test pattern and return to the menu. Menu operation and keystone correction are not possible when the test pattern is displayed. Selecting Microphone Type [MIC SELECT] This feature allows you to select dynamic or condenser type for your...