NEC M322x Projector Users Manual

							80
5. Using On-Screen Menu
❶ Using the Menus
NOTE:	The	on-screen	menu	may	not	be	displayed	correctly	while	interlaced	motion	video	image	is	projected.
1.	 Press	the	MENU	button	on	the	remote	control	or	the	projector	cabinet	to	display	the	menu.
 
NOTE:	The	commands	such	as	ENTER,	EXIT,	▲▼,	◀▶	in	the	bottom	show	available	buttons	for	your	operation.
2. Press the ◀▶	buttons	on	the	remote	control	or	the	projector	cabinet	to	display	the	submenu.
3.	 Press	 the	ENTER	 button	on	the	 remote	 control	 or	the	 projector	 cabinet	to	highlight	 the	top	 item	 or	the	 first	
tab.
4. Use the ▲▼	buttons	 on	the	 remote	 control	 or	the	 projector	 cabinet	to	select	 the	item	 you	want	 to	adjust	 or	
set.
 You can use the ◀▶	buttons	on	the	remote	control	or	the	projector	cabinet	to	select	the	tab	you	want.
5.	 Press	the	ENTER	button	on	the	remote	control	or	the	projector	cabinet	to	display	the	submenu	window.
6.	 Adjust	 the	level	 or	turn	 the	selected	 item	on	or	off	 by	using	 the	▲▼◀▶ buttons on the remote control or 
the projector cabinet.
Changes	are	stored	until	adjusted	again.
7.	 Repeat	 steps	2	-6	 to	 adjust	 an	additional	 item,	or	 press	 the	EXIT	 button	 on	the	 remote	 control	 or	the	 projec-
tor	cabinet	to	quit	the	menu	display.
NOTE:	When	a	menu	or	message	is	displayed,	several	lines	of	information	may	be	lost,	depending	on	the	signal	or	settings.
8.  Press the MENU button to close the menu.
	 To	return	to	the	previous	menu, 	press	the	EXIT	button. 
						

							81
5. Using On-Screen Menu
❷ Menu Elements
Slide barSolid triangleTab
Radio button
High Altitude symbol ECO mode symbol Wireless symbol
Menu	windows	or	dialog	boxes	typically	have	the	following	elements:
Highlight 
�����������������������������Indicates the selected menu or item� 
Solid triangle  ����������������������Indicates further choices are available� A highlighted triangle indicates the item is active� 
Tab ��������������������������������������Indicates a group of features in a dialog box� Selecting on any tab brings its page to the front�
Radio button  �����������������������Use this round button to select an option in a dialog box�
Source  ��������������������������������Indicates the currently selected source�
Off Timer remaining time ����Indicates the remaining countdown time when the [OFF TIMER] is preset�
Slide bar  �����������������������������Indicates settings or the direction of adjustment�
ECO mode symbol ��������������Indicates ECO MODE is set�
Key Lock symbol  ����������������Indicates the [CONTROL PANEL LOCK] is enabled�
Thermometer symbol ���������Indicates  the  [ECO  MODE]  is  forcibly  set  to  [ON]  mode  because  the  internal  temperature  is  too 
high�
High Altitude symbol ����������Indicates the [FAN MODE] is set to [HIGH ALTITUDE] mode�
Wireless symbol �����������������Indicate the wireless LAN connection is enabled�
Source
Available buttons
Thermometer symbol
Key	Lock	symbol
Off Timer remaining 
time
Highlight 
						

							82
5. Using On-Screen Menu
❸ List of Menu Items
Some	menu	items	are	not	available	depending	on	the	input	source.
Menu	ItemDefaultOptions
SOURCE COMPUTER
*
HDMI1 *
HDMI2 *
VIDEO *
USB-A *
LAN *
USB-B *
ADJUST PICTUREPRESET
*1–7
DETAIL	SETTINGS REFERENCE
*
HIGH-BRIGHT,	PRESENTATION,	 VIDEO,	MOVIE,	GRAPHIC,	sRGB,	DICOM	SIM.GAMMA	CORRECTION*1DYNAMIC,	NATURAL,	BLACK	DETAIL
SCREEN	SIZE*2*LARGE,	MEDIUM,	SMALLCOLOR	TEMPERATURE*5000,	6500,	7800,	9300
COLOR	ENHANCEMENT*OFF,	LOW,	MEDIUM,	HIGH
DYNAMIC	CONTRAST*OFF,	ON
CONTRAST
64
BRIGHTNESS 64
SHARPNESS 8
COLOR 64
HUE 32
RESET
IMAGE	OPTIONS CLOCK
*
PHASE *
HORIZONTAL *
VERTICAL *
OVERSCAN AUTO
AUTO,	OFF,	ON
ASPECT	RATIO*M402X/M362X/M322X/M282X/M332XS:	AUTO,	4:3,	16:9,	15:9,	16:10,	WIDE	ZOOM,	NATIVE
*M402W/M362W/M322W/M352WS/M302WS: 	AUTO,	4:3,	16:9,	15:9,	16:10,	LETTERBOX,	NATIVEPOSITION	(Not	available	on	M402W/M362W/M322W/M352WS/M302WS) 0−16	to	16
NOISE	REDUCTIONOFFOFF,	LOW,	MEDIUM,	HIGHTELECINE2-2/2-3	AUTOOFF,	2-2/2-3	AUTO,	2-2	ON,	2-3	ON
SETUP
GENERAL
DIGITAL	ZOOM	(M352WS/M302WS/M332XS) 100
80 to 100AUTO	KEYSTONE	(VERTICAL	only)ONOFF,	ON
KEYSTONE 0HORIZONTAL*3VERTICALKEYSTONE	SAVEOFFOFF,	ON
WALL	COLOROFFOFF,	
WHITEBOARD,	BLACKBOARD,	BLACKBOARD	(GRAY),	LIGHT	 YELLOW,	LIGHT	BLUE,	LIGHT	ROSE
ECO	SETTINGS
ECO	MODEAUTO	ECOOFF,	AUTO	ECO,	NORMAL,	ECOAUTO	ECO	OPTIONSAUTO	DIMOFFOFF,	0:01,	0:03,	0:10,	0:20ROOM	LIGHT	SENSING OFFOFF,	ON
NORMAL	OPTIONCONSTANT	BRIGHTNESSOFFOFF,	ON
ECO	OPTIONCONSTANT	BRIGHTNESSOFFOFF,	ON
CLOSED	CAPTIONOFFOFF,	CAPTION1,	CAPTION2,	CAPTION3,	CAPTION4,	TEXT1,	
TEXT2,	TEXT3,	TEXT4OFF	TIMEROFFOFF,	0:30,	1:00,	2:00,	4:00,	8:00,	12:00,	16:00
*	 The	asterisk	(*)	indicates	that	the	default	setting	varies	depending	on	the	signal.*1	 The	[GAMMA	CORRECTION]	item	is	available	when	an	item	other	than	[DICOM	SIM.]	is	selected	for	[REFERENCE].*2	 The	[SCREEN	SIZE]	item	is	available	when	[DICOM	SIM.]	is	selected	for	[REFERENCE].*3	 The	[HORIZONTAL]	item	is	not	available	on	M352WS,	M302WS,	and	M332XS. 
						

							83
5. Using On-Screen Menu
Menu	ItemDefaultOptions
SETUP GENERAL
LANGUAGE ENGLISHENGLISH,	DEUTSCH,	FRANÇAIS,	ITALIANO,	ESPAÑOL,	SVENSKA,	日本語DANSK,	PORTUGUÊS,	ČEŠTINA,	MAGYAR,	POLSKI,	NEDERLANDS,	SUOMINORSK,	TÜRKÇE,	РУССКИЙ, , Ελληνικά, 中文, 한국어
ROMÂNĂ, HRVATSKI, БЪЛГАРСКИ, INDONESIA, हिन्दी, 
ไทย, 
, 繁體中文
MENUCOLOR	SELECTCOLORCOLOR,	MONOCHROMESOURCE	DISPLAYONOFF,	ONID	DISPLAYONOFF,	ONECO	MESSAGEOFFOFF,	ONDISPLAY	 TIMEAUTO	45	SECMANUAL,	AUTO	5	SEC,	AUTO	15	SEC,	AUTO	45	SECBACKGROUND BLUEBLUE,	BLACK,	LOGO
INSTALLATIONORIENTATION
DESKTOP	FRONTDESKTOP	FRONT,	CEILING	REAR,	DESKTOP	REAR,	CEILING	FRONTCONTROL	PANEL	LOCKOFFOFF,	ONSECURITY
OFFOFF,	ONCOMMUNICATION	SPEED38400bps4800bps,	9600bps,	19200bps,	38400bps
CONTROL	IDCONTROL	ID	NUMBER1
1 to 254CONTROL	IDOFFOFF,	ONTEST	PATTERNCROSS	HATCHMIC	SELECTDYNAMIC	MICDYNAMIC	MIC,	CONDENSER	MICMIC	GAIN20 to 15
OPTIONS(1)FAN	MODEAUTOAUTO,	HIGH,	HIGH	ALTITUDE
COLOR	SYSTEMVIDEO AUTOAUTO,	NTSC3.58,	NTSC4.43,	PAL,	PAL-M,	PAL-N,	PAL60,	SECAM
WXGA	MODE
M402X/M362X/
M322X/M282X/
M332XS:	OFF	M402W/M362W/
M322W/M352WS/
M302WS: 	ON
OFF,	ON
HDMI	SETTINGS
HDMI1VIDEO	LEVELNORMALAUTO,	NORMAL,	ENHANCEDHDMI2VIDEO	LEVELNORMALAUTO,	NORMAL,	ENHANCED
AUDIO	SELECT
HDMI1 HDMI1HDMI1,	COMPUTERHDMI2HDMI2HDMI2,	COMPUTERLAN LANLAN,	COMPUTERUSB	BUSB	BUSB	B,	COMPUTERBEEP ONOFF,	ON
OPTIONS(2)
STANDBY	MODENORMALNORMAL,	NETWORK	STANDBYDIRECT	POWER	ONOFFOFF,	ONAUTO	POWER	ON(COMP.)OFFOFF,	ONAUTO	POWER	OFF*1:00OFF,	0:05,	0:10,	0:15,	0:20,	0:30,	1:00
DEFAULT	SOURCE	SELECTLASTLAST,	AUTO,	COMPUTER,	HDMI1,	HDMI2,	VIDEO,	USB-A,	LAN,	USB-BCARBON	CONVERT0.505
CURRENCY $$, €,	JP¥,	RMB¥CURRENCY	CONVERT
3D COMPUTER
3D
OFF
OFF,	ONGLASSESDLP®	LinkDLP®	Link,	OTHERSFORMATSIDE	BY	SIDESIDE	BY	SIDE,	TOP	AND	BOTTOM,	FRAME	SEQUENTIALL/R	INVERTNON-INVERTNON-INVERT,	INVERT
HDMI1 3D
OFF
OFF,	ONGLASSESDLP®	LinkDLP®	Link,	OTHERS
FORMAT AUTOAUTO,	FRAME	PACKING,	SIDE	BY	SIDE,	 TOP	AND	BOTTOML/R	INVERTNON-INVERTNON-INVERT,	INVERT
HDMI23D
OFF
OFF,	ONGLASSESDLP®	LinkDLP®	Link,	OTHERS
FORMAT AUTOAUTO,	FRAME	PACKING,	SIDE	BY	SIDE,	 TOP	AND	BOTTOML/R	INVERTNON-INVERTNON-INVERT,	INVERT
VIDEO3D
OFFOFF,	ONGLASSESDLP®	LinkDLP®	Link,	OTHERSL/R	INVERTNON-INVERTNON-INVERT,	INVERT
WIRED	LAN
WIRED	LANENABLEDISABLE,	ENABLE
SETTINGSDHCP:	ONAUTO	DNS: 	OFFDHCP,	IP	ADDRESS,	SUBNET	MASK,	GATEWAY,	AUTO	DNS,	DNSRECONNECT
WIRELESS	LANPROFILE DISABLEDISABLE,	EASY	CONNECTION,	SIMPLE	ACCESS	POINT,	PROFILE1,	PROFILE2RECONNECT
*AUTO	POWER	OFF:	This	item	can	be	selected	only	when	[NORMAL]	is	selected	for	[STANDBY	MODE]. 
						

							84
5. Using On-Screen Menu
Menu	ItemDefaultOptions
INFO.
USAGE	 TIME
LAMP	LIFE	REMAININGLAMP	HOURS	USEDTOTAL	CARBON	SAVINGSTOTAL	COST	SAVINGS
SOURCE(1) RESOLUTION
HORIZONTAL	FREQUENCYVERTICAL	FREQUENCYSYNC	
TYPESYNC	POLARITYSCAN	TYPE
SOURCE(2)
SIGNAL	 TYPEVIDEO	TYPEBIT	DEPTHVIDEO	LEVEL3D	SIGNAL
WIRED	LAN
IP	ADDRESSSUBNET	MASKGATEWAYMAC	ADDRESS
WIRELESS	LAN
IP	ADDRESSSUBNET	MASKGATEWAYMAC	ADDRESSSSIDNETWORK	 TYPEWEP/WPA
CHANNEL
SIGNAL	LEVEL
VERSION(1) FIRMWARE
D ATA
VERSION(2) FIRMWARE2
OTHERS
PROJECTOR	NAMEMODEL	NO.SERIAL	NUMBERLAN	UNIT	 TYPECONTROL	ID	(when	[CONTROL	ID]	is	set)
RESETCURRENT	SIGNALALL	DATACLEAR	LAMP	HOURS 
						

							85
5. Using On-Screen Menu
❹ Menu Descriptions & Functions [SOURCE]
COMPUTER
Selects	the	computer	connected	to	your	COMPUTER	input	connector	signal.
NOTE:	When	the	component	input	signal	is	connected	to	the	COMPUTER	IN	connector,	select	[COMPUTER]	respectively.	
HDMI1 and 2
Selects	the	HDMI	compatible	equipment	connected	to	your	HDMI	1	or	HDMI	2	IN	connector.
VIDEO
Selects	what	is	connected	to	your	
VIDEO	input-VCR,	DVD	player	or	document	camera.
USB-A (Viewer)
This	feature	enables	you	to	make	presentations	using	a	USB	memory	that	contains	slides.
(→	page	72	“4. 	Using	the	 Viewer”)
LAN
Selects	a	signal	from	the	LAN	port	(RJ-45)	or	the	installed	USB	wireless	LAN	unit	(optional).
USB-B (USB Display)
Selects	the	computer	connected	to	the	USB-B	port	(type	B)	by	using	a	commercially	available	USB	cable. 	
(→	page	45) 
						

							86
5. Using On-Screen Menu
❺ Menu Descriptions & Functions [ADJUST]
[PICTURE]
[PRESET]
This	function	allows	you	to	select	optimized	settings	for	your	projected	image.
You	can	adjust	neutral	tint	for	yellow,	cyan	or	magenta.	
There	are	seven	 factory	 presets	 optimized	 for	various	 types	of	images. 	You	 can	also	 use	[DETAIL	 SETTINGS]	 to	set	
user	adjustable	settings	to	customize	each	gamma	or	color.
Your	settings	can	be	stored	in	[PRESET	1]	to	[PRESET	7].
HIGH-BRIGHT ��������Recommended for use in a brightly lit room�
PRESENTATION  �����Recommended for making a presentation using a PowerPoint file�
VIDEO ��������������������Recommended for typical TV program viewing�
MOVIE  �������������������Recommended for movies�
GRAPHIC ���������������Recommended for graphics�
sRGB  ���������������������Standard color values
DICOM SIM�  ����������Recommended for DICOM simulation format�
NOTE:	
•	 The	[DICOM	SIM.]	option	is	for	training/reference	only	and	should	not	be	used	for	actual	diagnosis.
•	 DICOM	 stands	for	Digital	 Imaging	 and	Communications	 in	Medicine.	 It	is	 a	standard	 developed	 by	the	 American	 College	of	Radiol-
ogy	(ACR)	and	the	National	Electrical	Manufacturers	Association	(NEMA).	
	 The	standard	specifies	how	digital	image	data	can	be	moved	from	system	to	system.	
[DETAIL SETTINGS] 
						

							87
5. Using On-Screen Menu
Storing	Your	Customized	Settings	[REFERENCE]
This	function	allows	you	to	store	your	customized	settings	in	[PRESET	1]	to	[PRESET	7].
First,	select	 a	base	 preset	 mode	from	[REFERENCE],	 then	set	[GAMMA	 CORRECTION],	 [SCREEN	SIZE],	[COLOR	
TEMPERATURE],	[COLOR	ENHANCEMENT],	and	[DYNAMIC	CONTRAST]. 	
HIGH-BRIGHT ��������Recommended for use in a brightly lit room�
PRESENTATION  �����Recommended for making a presentation using a PowerPoint file�
VIDEO ��������������������Recommended for typical TV program viewing�
MOVIE  �������������������Recommended for movies�
GRAPHIC ���������������Recommended for graphics�
sRGB  ���������������������Standard color values�
DICOM SIM�  ����������Recommended for DICOM simulation format�
Selecting Gamma Correction Mode [GAMMA CORRECTION]
Each	mode	is	recommended	for:
DYNAMIC ��������������Creates a high-contrast picture�
NATURAL ���������������Natural reproduction of the picture�
BLACK DETAIL  �������Emphasizes detail in dark areas of the picture�
NOTE:	This	function	is	not	available	when	[DICOM	SIM.]	is	selected	for	[DETAIL	SETTINGS].
Selecting	Screen	Size	for	DICOM	SIM	[SCREEN	SIZE]
This	function	will	perform	gamma	correction	appropriate	for	the	screen	size.
LARGE  �������������������For screen size of 150"
MEDIUM
  ����������������For screen size of 100"
SMALL
  �������������������For screen size of 50"
NOTE:	This	function	is	available	only	when	[DICOM	SIM.]	is	selected	for	[DETAIL	SETTINGS].
Adjusting	Color	 Temperature	[COLOR	 TEMPERATURE]
This	option	allows	you	to	select	the	color	temperature	of	your	choice.
NOTE:	When	[PRESENTATION]	or	[HIGH-BRIGHT]	is	selected	in	[REFERENCE],	this	function	is	not	available.
Enhancing the Color [COLOR ENHANCEMENT]
This	function	allows	you	to	adjust	the	color	density	of	the	image.
The	color	 of	the	 image	 will	become	 deeper	in	the	 order	 of	“LOW”,	 “MEDIUM” 	and	 “HIGH” 	as	 the	 image	 will	become	
darker.
With	[OFF]	selected,	the	COLOR	ENHANCEMENT	function	will	not	work.
Adjusting	Brightness	and	Contrast	[DYNAMIC	CONTRAST]
This	function	allows	you	to	adjust	the	contrast	ratio	optically	using	the	built-in	iris.
To	increase	the	contrast	ratio,	select	[ON].
NOTE:
•	 The	[DYNMIC	CONTRAST]	item	cannot	be	selected	in	the	following	cases:
-	 When	[CONSTANT	BRIGHTNESS]	is	enabled	with	[ON]	selected	for	[ECO	MODE]	from	[ECO	SETTINGS].
-	 When	[ON]	is	selected	for	[3D]	while	images	are	projected.
•	 The	 ECO	MODE	 and	DYNAMIC	 CONTRAST	 features	control	the	lamp	 power.	 Some	pictures	 may	become	 extremely	 bright	when	
using	both	ECO	MODE	 and	DYNAMIC	 CONTRAST	 features	to	control	 the	lamp	 power.	 To	avoid	 this	phenomena,	 turn	off	the	 ECO	
MODE	and	DYNAMIC	CONTRAST. 
						

							88
5. Using On-Screen Menu
[CONTRAST]
Adjusts	the	intensity	of	the	image	according	to	the	incoming	signal.
[BRIGHTNESS]
Adjusts	the	brightness	level	or	the	back	raster	intensity.
[SHARPNESS]
Controls	the	detail	of	the	image.
[COLOR]
Increases	or	decreases	the	color	saturation	level.
[HUE]
Varies	the	color	level	from	+/−	green	to	+/−	blue.	The	red	level	is	used	as	reference.
Input	signalCONTRAST BRIGHTNESS SHARPNESS COLORHUE
COMPUTER/HDMI	(RGB)YesYesYes NoNo
COMPUTER/HDMI	(COMPONENT)YesYesYesYesYes
VIDEO/COMPONENT YesYesYesYesYes
USB-A/LAN/USB-B YesYesYes NoNo
Yes	=	Adjustable,	No	=	Not	adjustable
[RESET]
The	settings	 and	adjustments	 for	[PICTURE]	 will	be	returned	 to	the	 factory	 settings	 with	the	exception	 of	the	 following; 	
Preset	numbers	and	[REFERENCE]	within	the	[PRESET]	screen.
The	settings	 and	adjustments	 under	[DETAIL	 SETTINGS]	 within	the	[PRESET]	 screen	that	are	not	currently	 selected	
will	not	be	reset. 
						

							89
5. Using On-Screen Menu
[IMAGE OPTIONS]
Adjusting	Clock	and	Phase	[CLOCK/PHASE]
This	allows	you	to	manually	adjust	CLOCK	and	PHASE.
CLOCK �������������������Use this item to fine tune the computer image or to remove any vertical banding that might appear � This 
function adjusts the clock frequencies that eliminate the horizontal ban\
ding in the image�
This adjustment may be necessary when you connect your computer for the first time�
PHASE �������������������Use  this  item  to  adjust  the  clock  phase  or  to  reduce  video  noise,  dot  interference  or  cross  talk�  (This  is 
evident when part of your image appears to be shimmering�)
Use [PHASE] only after the [CLOCK] is complete�
NOTE:	The	[CLOCK]	and	[PHASE]	items	are	available	for	RGB	signals	only.