NEC M300xs Projector Users Manual
Here you can view all the pages of manual NEC M300xs Projector Users Manual. The NEC manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 101
![Page 101
91
5. Using On-Screen Menu
Setting up the Projector for a Wired LAN Connection [WIRED LAN]
Important
• Consult with your network administrator about these settings.
• When using a wired LAN connection, connect a LAN cable (Ethernet cable) to the LAN port (RJ-45) of the projec-
tor. (→ page 110)
TIP: The network settings you make will not be affected even when [RESET] is done from the menu.
[WIRED LAN][DISABLE]Wired LAN connection will be turned off.
[ENABLE]Wired LAN connection will be turned...](http://img.usermanuals.tech/thumb/54/92041/w300_nec-m300xs-manual_d-100.png "Page 101
91
5. Using On-Screen Menu
Setting up the Projector for a Wired LAN Connection [WIRED LAN]
Important
• Consult with your network administrator about these settings.
• When using a wired LAN connection, connect a LAN cable (Ethernet cable) to the LAN port (RJ-45) of the projec-
tor. (→ page 110)
TIP: The network settings you make will not be affected even when [RESET] is done from the menu.
[WIRED LAN][DISABLE]Wired LAN connection will be turned off.
[ENABLE]Wired LAN connection will be turned...")
91 5. Using On-Screen Menu Setting up the Projector for a Wired LAN Connection [WIRED LAN] Important • Consult with your network administrator about these settings. • When using a wired LAN connection, connect a LAN cable (Ethernet cable) to the LAN port (RJ-45) of the projec- tor. (→ page 110) TIP: The network settings you make will not be affected even when [RESET] is done from the menu. [WIRED LAN][DISABLE]Wired LAN connection will be turned off. [ENABLE]Wired LAN connection will be turned...
Page 102
![Page 102
92
5. Using On-Screen Menu
Setting up the Projector for a Wireless LAN Connection (with the optional USB Wireless
LAN Unit equipped) [WIRELESS LAN]
Important
• Consult with your network administrator about these settings.
• When using a wireless LAN connection, attach the optional USB Wireless LAN to the projector. (→ page 111)
[PROFILE][DISABLE]Wireless LAN connection will be turned off
[EASY CONNECTION]Select [EASY CONNECTION] to execute a wireless LAN
easily using Image Express Utility Lite...](http://img.usermanuals.tech/thumb/54/92041/w300_nec-m300xs-manual_d-101.png "Page 102
92
5. Using On-Screen Menu
Setting up the Projector for a Wireless LAN Connection (with the optional USB Wireless
LAN Unit equipped) [WIRELESS LAN]
Important
• Consult with your network administrator about these settings.
• When using a wireless LAN connection, attach the optional USB Wireless LAN to the projector. (→ page 111)
[PROFILE][DISABLE]Wireless LAN connection will be turned off
[EASY CONNECTION]Select [EASY CONNECTION] to execute a wireless LAN
easily using Image Express Utility Lite...")
92 5. Using On-Screen Menu Setting up the Projector for a Wireless LAN Connection (with the optional USB Wireless LAN Unit equipped) [WIRELESS LAN] Important • Consult with your network administrator about these settings. • When using a wireless LAN connection, attach the optional USB Wireless LAN to the projector. (→ page 111) [PROFILE][DISABLE]Wireless LAN connection will be turned off [EASY CONNECTION]Select [EASY CONNECTION] to execute a wireless LAN easily using Image Express Utility Lite...
Page 103
![Page 103
93
5. Using On-Screen Menu
Hints on How to Set Up LAN Connection
To set up the projector for a LAN connection:
Access the HTTP server function to display the web browser (→ page 44) and select [NETWORK SETTINGS] →
[SETTINGS] → [WIRELESS LAN] → [PROFILE 1] or [PROFILE 2].
Two settings can be set for the USB Wireless LAN Unit.
Next select [SETTINGS] for your selected profile, and set [ENABLE] or [DISABLE] for [DHCP], [IP ADDRESS],
[SUBNET MASK], and [GATEWAY]. Last click [SAVE]. To...](http://img.usermanuals.tech/thumb/54/92041/w300_nec-m300xs-manual_d-102.png "Page 103
93
5. Using On-Screen Menu
Hints on How to Set Up LAN Connection
To set up the projector for a LAN connection:
Access the HTTP server function to display the web browser (→ page 44) and select [NETWORK SETTINGS] →
[SETTINGS] → [WIRELESS LAN] → [PROFILE 1] or [PROFILE 2].
Two settings can be set for the USB Wireless LAN Unit.
Next select [SETTINGS] for your selected profile, and set [ENABLE] or [DISABLE] for [DHCP], [IP ADDRESS],
[SUBNET MASK], and [GATEWAY]. Last click [SAVE]. To...")
93 5. Using On-Screen Menu Hints on How to Set Up LAN Connection To set up the projector for a LAN connection: Access the HTTP server function to display the web browser (→ page 44) and select [NETWORK SETTINGS] → [SETTINGS] → [WIRELESS LAN] → [PROFILE 1] or [PROFILE 2]. Two settings can be set for the USB Wireless LAN Unit. Next select [SETTINGS] for your selected profile, and set [ENABLE] or [DISABLE] for [DHCP], [IP ADDRESS], [SUBNET MASK], and [GATEWAY]. Last click [SAVE]. To...
Page 104
![Page 104
94
5. Using On-Screen Menu
Menu Descriptions & Functions [INFO.]
Displays the status of the current signal and lamp usage. This item has six pages. The information included is as
follows:
TIP: Pressing the HELP button on the remote control will show the [INFO.] menu items.
[USAGE TIME]
[LAMP LIFE REMAINING] (%)*
[LAMP HOURS USED] (H)
[FILTER HOURS USED] (H)
[TOTAL CARBON SAVINGS] (kg-CO2)
* The progress indicator shows the percentage of remaining bulb life.
The value informs you of the...](http://img.usermanuals.tech/thumb/54/92041/w300_nec-m300xs-manual_d-103.png "Page 104
94
5. Using On-Screen Menu
Menu Descriptions & Functions [INFO.]
Displays the status of the current signal and lamp usage. This item has six pages. The information included is as
follows:
TIP: Pressing the HELP button on the remote control will show the [INFO.] menu items.
[USAGE TIME]
[LAMP LIFE REMAINING] (%)*
[LAMP HOURS USED] (H)
[FILTER HOURS USED] (H)
[TOTAL CARBON SAVINGS] (kg-CO2)
* The progress indicator shows the percentage of remaining bulb life.
The value informs you of the...")
94 5. Using On-Screen Menu Menu Descriptions & Functions [INFO.] Displays the status of the current signal and lamp usage. This item has six pages. The information included is as follows: TIP: Pressing the HELP button on the remote control will show the [INFO.] menu items. [USAGE TIME] [LAMP LIFE REMAINING] (%)* [LAMP HOURS USED] (H) [FILTER HOURS USED] (H) [TOTAL CARBON SAVINGS] (kg-CO2) * The progress indicator shows the percentage of remaining bulb life. The value informs you of the...
Page 105
![Page 105
95
5. Using On-Screen Menu
[SOURCE]
[SOURCE NAME] [SOURCE INDEX]
[HORIZONTAL FREQUENCY] [VERTICAL FREQUENCY]
[SIGNAL TYPE] [VIDEO TYPE]
[SYNC TYPE] [SYNC POLARITY]
[SCAN TYPE]
[WIRED LAN]
[IP ADDRESS] [SUBNET MASK]
[GATEWAY] [MAC ADDRESS]
[WIRELESS LAN]
[IP ADDRESS] [SUBNET MASK]
[GATEWAY] [MAC ADDRESS]
[SSID] [NETWORK TYPE]
[WEP/WPA] [CHANNEL]
[SIGNAL LEVEL]](http://img.usermanuals.tech/thumb/54/92041/w300_nec-m300xs-manual_d-104.png "Page 105
95
5. Using On-Screen Menu
[SOURCE]
[SOURCE NAME] [SOURCE INDEX]
[HORIZONTAL FREQUENCY] [VERTICAL FREQUENCY]
[SIGNAL TYPE] [VIDEO TYPE]
[SYNC TYPE] [SYNC POLARITY]
[SCAN TYPE]
[WIRED LAN]
[IP ADDRESS] [SUBNET MASK]
[GATEWAY] [MAC ADDRESS]
[WIRELESS LAN]
[IP ADDRESS] [SUBNET MASK]
[GATEWAY] [MAC ADDRESS]
[SSID] [NETWORK TYPE]
[WEP/WPA] [CHANNEL]
[SIGNAL LEVEL]")
95 5. Using On-Screen Menu [SOURCE] [SOURCE NAME] [SOURCE INDEX] [HORIZONTAL FREQUENCY] [VERTICAL FREQUENCY] [SIGNAL TYPE] [VIDEO TYPE] [SYNC TYPE] [SYNC POLARITY] [SCAN TYPE] [WIRED LAN] [IP ADDRESS] [SUBNET MASK] [GATEWAY] [MAC ADDRESS] [WIRELESS LAN] [IP ADDRESS] [SUBNET MASK] [GATEWAY] [MAC ADDRESS] [SSID] [NETWORK TYPE] [WEP/WPA] [CHANNEL] [SIGNAL LEVEL]
Page 106
![Page 106
96
5. Using On-Screen Menu
[VERSION]
[FIRMWARE] Version
[DATA] Version
[OTHERS]
[PROJECTOR NAME]
[MODEL NO.]
[SERIAL NUMBER]
[LAN UNIT TYPE]
[CONTROL ID] (when [CONTROL ID] is set)](http://img.usermanuals.tech/thumb/54/92041/w300_nec-m300xs-manual_d-105.png "Page 106
96
5. Using On-Screen Menu
[VERSION]
[FIRMWARE] Version
[DATA] Version
[OTHERS]
[PROJECTOR NAME]
[MODEL NO.]
[SERIAL NUMBER]
[LAN UNIT TYPE]
[CONTROL ID] (when [CONTROL ID] is set)")
96 5. Using On-Screen Menu [VERSION] [FIRMWARE] Version [DATA] Version [OTHERS] [PROJECTOR NAME] [MODEL NO.] [SERIAL NUMBER] [LAN UNIT TYPE] [CONTROL ID] (when [CONTROL ID] is set)
Page 107
![Page 107
97
5. Using On-Screen Menu
Menu Descriptions & Functions [RESET]
Returning to Factory Default [RESET]
The RESET feature allows you to change adjustments and settings to the factory preset for a (all) source (s) except
the following:
[CURRENT SIGNAL]
Resets the adjustments for the current signal to the factory preset levels.
The items that can be reset are: [PRESET], [CONTRAST], [BRIGHTNESS], [COLOR], [HUE], [SHARPNESS],
[ASPECT RATIO], [HORIZONTAL], [VERTICAL], [CLOCK], [PHASE], and...](http://img.usermanuals.tech/thumb/54/92041/w300_nec-m300xs-manual_d-106.png "Page 107
97
5. Using On-Screen Menu
Menu Descriptions & Functions [RESET]
Returning to Factory Default [RESET]
The RESET feature allows you to change adjustments and settings to the factory preset for a (all) source (s) except
the following:
[CURRENT SIGNAL]
Resets the adjustments for the current signal to the factory preset levels.
The items that can be reset are: [PRESET], [CONTRAST], [BRIGHTNESS], [COLOR], [HUE], [SHARPNESS],
[ASPECT RATIO], [HORIZONTAL], [VERTICAL], [CLOCK], [PHASE], and...")
97 5. Using On-Screen Menu Menu Descriptions & Functions [RESET] Returning to Factory Default [RESET] The RESET feature allows you to change adjustments and settings to the factory preset for a (all) source (s) except the following: [CURRENT SIGNAL] Resets the adjustments for the current signal to the factory preset levels. The items that can be reset are: [PRESET], [CONTRAST], [BRIGHTNESS], [COLOR], [HUE], [SHARPNESS], [ASPECT RATIO], [HORIZONTAL], [VERTICAL], [CLOCK], [PHASE], and...
Page 108
98 6. Installation and Connections 32 1 This section describes how to set up your projector and how to connect video and audio sources. Your projector is simple to set up and use. But before you get started, you must first: z Set up a screen and the projector. x Connect your computer or video equipment to the projector. (→ page 104, 106, 107, 108, 109, 110, 111) c Connect the supplied power cord. (→ page 15) NOTE: • Ensure that the power cord and any other cables are disconnected...
Page 109
![Page 109
99
6. Installation and Connections
[M420X/M420XV]
The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is
approximately 25" (0.64 m) measured diagonally when the projector is roughly 34 inches (0.9 m) from the wall or
screen. The largest the image can be is 300" (7.6 m) when the projector is about 434 inches (11.0 m) from the wall
or screen.
300
240
Distance
(Unit: m/inch)
Lens center Screen Size
Screen...](http://img.usermanuals.tech/thumb/54/92041/w300_nec-m300xs-manual_d-108.png "Page 109
99
6. Installation and Connections
[M420X/M420XV]
The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is
approximately 25\" (0.64 m) measured diagonally when the projector is roughly 34 inches (0.9 m) from the wall or
screen. The largest the image can be is 300\" (7.6 m) when the projector is about 434 inches (11.0 m) from the wall
or screen.
300
240
Distance
(Unit: m/inch)
Lens center Screen Size
Screen...")
99 6. Installation and Connections [M420X/M420XV] The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is approximately 25" (0.64 m) measured diagonally when the projector is roughly 34 inches (0.9 m) from the wall or screen. The largest the image can be is 300" (7.6 m) when the projector is about 434 inches (11.0 m) from the wall or screen. 300 240 Distance (Unit: m/inch) Lens center Screen Size Screen...
Page 110
![Page 110
100
6. Installation and Connections
[M350XS/M300XS/M260XS]
The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is ap-
proximately 60" (1.52 m) measured diagonally when the projector is 23 inches (0.57 m) from the wall or screen. The
largest the image can be is 110" (2.8 m) when the projector is about 43 inches (1.1 m) from the wall or screen.
Distance
(Unit: m/inch)
Lens center Screen Size
110
100
90
84
80...](http://img.usermanuals.tech/thumb/54/92041/w300_nec-m300xs-manual_d-109.png "Page 110
100
6. Installation and Connections
[M350XS/M300XS/M260XS]
The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is ap-
proximately 60\" (1.52 m) measured diagonally when the projector is 23 inches (0.57 m) from the wall or screen. The
largest the image can be is 110\" (2.8 m) when the projector is about 43 inches (1.1 m) from the wall or screen.
Distance
(Unit: m/inch)
Lens center Screen Size
110
100
90
84
80...")
100 6. Installation and Connections [M350XS/M300XS/M260XS] The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is ap- proximately 60" (1.52 m) measured diagonally when the projector is 23 inches (0.57 m) from the wall or screen. The largest the image can be is 110" (2.8 m) when the projector is about 43 inches (1.1 m) from the wall or screen. Distance (Unit: m/inch) Lens center Screen Size 110 100 90 84 80...