NEC M300ws Portable Projector Users Manual
Here you can view all the pages of manual NEC M300ws Portable Projector Users Manual. The NEC manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 81
71 5. Using On-Screen Menu List of Menu Items Some menu items are not available depending on the input source. Menu ItemDefaultOptions SOURCE COMPUTER1 * COMPUTER2 * HDMI * VIDEO * S-VIDEO * VIEWER * NETWORK * USB DISPLAY* ADJUST PICTURE PRESET *1–7 DETAIL SETTINGS GENERAL REFERENCE * HIGH-BRIGHT, PRESENTATION, VIDEO, MOVIE, GRAPHIC, sRGB, DICOM SIM.GAMMA CORRECTION*1DYNAMIC, NATURAL, BLACK DETAIL SCREEN SIZE*2*LARGE, MEDIUM, SMALLCOLOR TEMPERATURE*5000, 6500, 7800, 8500, 9300, 10500 DYNAMIC...
Page 82
72 5. Using On-Screen Menu SETUP INSTALLATIONORIENTATION DESKTOP FRONTDESKTOP FRONT, CEILING REAR, DESKTOP REAR, CEILING FRONTCONTROL PANEL LOCKOFFOFF, ONSECURITY OFFOFF, ONCOMMUNICATION SPEED38400bps4800bps, 9600bps, 19200bps, 38400bps CONTROL IDCONTROL ID NUMBER1 1–254CONTROL IDOFFOFF, ONTEST PATTERN OPTIONS(1) AUTO ADJUSTNORMALOFF, NORMAL, FINEFAN MODEAUTOAUTO, HIGH, HIGH ALTITUDE SIGNAL SELECT COMPUTER1 RGB/COMPONENTRGB/COMPONENT, RGB, COMPONENTCOMPUTER2RGB/COMPONENTRGB/COMPONENT, RGB, COMPONENT...
Page 83
![Page 83
73
5. Using On-Screen Menu
Menu Descriptions & Functions [SOURCE]
COMPUTER 1 and 2
Selects the computer connected to your COMPUTER 1 or COMPUTER 2 input connector signal.
NOTE: When the component input signal is connected to the COMPUTER 1 IN or COMPUTER 2 IN connector, select [COMPUTER
1] or [COMPUTER 2] respectively.
HDMI
Selects the HDMI compatible equipment connected to your HDMI IN connector.
VIDEO
Selects what is connected to your VIDEO input-VCR, DVD player or document camera....](http://img.usermanuals.tech/thumb/54/92038/w300_nec-m300ws-manual_d-82.png "Page 83
73
5. Using On-Screen Menu
Menu Descriptions & Functions [SOURCE]
COMPUTER 1 and 2
Selects the computer connected to your COMPUTER 1 or COMPUTER 2 input connector signal.
NOTE: When the component input signal is connected to the COMPUTER 1 IN or COMPUTER 2 IN connector, select [COMPUTER
1] or [COMPUTER 2] respectively.
HDMI
Selects the HDMI compatible equipment connected to your HDMI IN connector.
VIDEO
Selects what is connected to your VIDEO input-VCR, DVD player or document camera....")
73 5. Using On-Screen Menu Menu Descriptions & Functions [SOURCE] COMPUTER 1 and 2 Selects the computer connected to your COMPUTER 1 or COMPUTER 2 input connector signal. NOTE: When the component input signal is connected to the COMPUTER 1 IN or COMPUTER 2 IN connector, select [COMPUTER 1] or [COMPUTER 2] respectively. HDMI Selects the HDMI compatible equipment connected to your HDMI IN connector. VIDEO Selects what is connected to your VIDEO input-VCR, DVD player or document camera....
Page 84
![Page 84
74
5. Using On-Screen Menu
Menu Descriptions & Functions [ADJUST]
[PICTURE]
[PRESET]
This function allows you to select optimized settings for your projected image.
You can adjust neutral tint for yellow, cyan or magenta.
There are seven factory presets optimized for various types of images. You can also use [DETAIL SETTINGS] to set
user adjustable settings to customize each gamma or color.
Your settings can be stored in [PRESET 1] to [PRESET 7].
HIGH-BRIGHT ��������Recommended for use in a...](http://img.usermanuals.tech/thumb/54/92038/w300_nec-m300ws-manual_d-83.png "Page 84
74
5. Using On-Screen Menu
Menu Descriptions & Functions [ADJUST]
[PICTURE]
[PRESET]
This function allows you to select optimized settings for your projected image.
You can adjust neutral tint for yellow, cyan or magenta.
There are seven factory presets optimized for various types of images. You can also use [DETAIL SETTINGS] to set
user adjustable settings to customize each gamma or color.
Your settings can be stored in [PRESET 1] to [PRESET 7].
HIGH-BRIGHT ��������Recommended for use in a...")
74 5. Using On-Screen Menu Menu Descriptions & Functions [ADJUST] [PICTURE] [PRESET] This function allows you to select optimized settings for your projected image. You can adjust neutral tint for yellow, cyan or magenta. There are seven factory presets optimized for various types of images. You can also use [DETAIL SETTINGS] to set user adjustable settings to customize each gamma or color. Your settings can be stored in [PRESET 1] to [PRESET 7]. HIGH-BRIGHT ��������Recommended for use in a...
Page 85
![Page 85
75
5. Using On-Screen Menu
[GENERAL]
Storing Your Customized Settings [REFERENCE]
This function allows you to store your customized settings in [PRESET 1] to [PRESET 7].
First, select a base preset mode from [REFERENCE], then set [GAMMA CORRECTION] and [COLOR TEMPERA-
TURE].
HIGH-BRIGHT ��������Recommended for use in a brightly lit room�
PRESENTATION �����Recommended for making a presentation using a PowerPoint file�
VIDEO ��������������������Recommended for typical TV program viewing�
MOVIE...](http://img.usermanuals.tech/thumb/54/92038/w300_nec-m300ws-manual_d-84.png "Page 85
75
5. Using On-Screen Menu
[GENERAL]
Storing Your Customized Settings [REFERENCE]
This function allows you to store your customized settings in [PRESET 1] to [PRESET 7].
First, select a base preset mode from [REFERENCE], then set [GAMMA CORRECTION] and [COLOR TEMPERA-
TURE].
HIGH-BRIGHT ��������Recommended for use in a brightly lit room�
PRESENTATION �����Recommended for making a presentation using a PowerPoint file�
VIDEO ��������������������Recommended for typical TV program viewing�
MOVIE...")
75 5. Using On-Screen Menu [GENERAL] Storing Your Customized Settings [REFERENCE] This function allows you to store your customized settings in [PRESET 1] to [PRESET 7]. First, select a base preset mode from [REFERENCE], then set [GAMMA CORRECTION] and [COLOR TEMPERA- TURE]. HIGH-BRIGHT ��������Recommended for use in a brightly lit room� PRESENTATION �����Recommended for making a presentation using a PowerPoint file� VIDEO ��������������������Recommended for typical TV program viewing� MOVIE...
Page 86
![Page 86
76
5. Using On-Screen Menu
[CONTRAST]
Adjusts the intensity of the image according to the incoming signal.
[BRIGHTNESS]
Adjusts the brightness level or the back raster intensity.
[SHARPNESS]
Controls the detail of the image.
[COLOR]
Increases or decreases the color saturation level.
[HUE]
Varies the color level from +/− green to +/− blue. The red level is used as reference.
Input signalCONTRAST BRIGHTNESS SHARPNESS COLORHUE
COMPUTER/HDMI (RGB)YesYesYes NoNo
COMPUTER/HDMI (COMPONENT)YesYesYesYesYes...](http://img.usermanuals.tech/thumb/54/92038/w300_nec-m300ws-manual_d-85.png "Page 86
76
5. Using On-Screen Menu
[CONTRAST]
Adjusts the intensity of the image according to the incoming signal.
[BRIGHTNESS]
Adjusts the brightness level or the back raster intensity.
[SHARPNESS]
Controls the detail of the image.
[COLOR]
Increases or decreases the color saturation level.
[HUE]
Varies the color level from +/− green to +/− blue. The red level is used as reference.
Input signalCONTRAST BRIGHTNESS SHARPNESS COLORHUE
COMPUTER/HDMI (RGB)YesYesYes NoNo
COMPUTER/HDMI (COMPONENT)YesYesYesYesYes...")
76 5. Using On-Screen Menu [CONTRAST] Adjusts the intensity of the image according to the incoming signal. [BRIGHTNESS] Adjusts the brightness level or the back raster intensity. [SHARPNESS] Controls the detail of the image. [COLOR] Increases or decreases the color saturation level. [HUE] Varies the color level from +/− green to +/− blue. The red level is used as reference. Input signalCONTRAST BRIGHTNESS SHARPNESS COLORHUE COMPUTER/HDMI (RGB)YesYesYes NoNo COMPUTER/HDMI (COMPONENT)YesYesYesYesYes...
Page 87
![Page 87
77
5. Using On-Screen Menu
[IMAGE OPTIONS]
Adjusting Clock and Phase [CLOCK/PHASE]
This allows you to manually adjust CLOCK and PHASE.
CLOCK �������������������Use this item to fine tune the computer image or to remove any vertical banding that might appear � This
function adjusts the clock frequencies that eliminate the horizontal ban\
ding in the image�
This adjustment may be necessary when you connect your computer for the first time�
PHASE �������������������Use this item to adjust the clock...](http://img.usermanuals.tech/thumb/54/92038/w300_nec-m300ws-manual_d-86.png "Page 87
77
5. Using On-Screen Menu
[IMAGE OPTIONS]
Adjusting Clock and Phase [CLOCK/PHASE]
This allows you to manually adjust CLOCK and PHASE.
CLOCK �������������������Use this item to fine tune the computer image or to remove any vertical banding that might appear � This
function adjusts the clock frequencies that eliminate the horizontal ban\
ding in the image�
This adjustment may be necessary when you connect your computer for the first time�
PHASE �������������������Use this item to adjust the clock...")
77 5. Using On-Screen Menu [IMAGE OPTIONS] Adjusting Clock and Phase [CLOCK/PHASE] This allows you to manually adjust CLOCK and PHASE. CLOCK �������������������Use this item to fine tune the computer image or to remove any vertical banding that might appear � This function adjusts the clock frequencies that eliminate the horizontal ban\ ding in the image� This adjustment may be necessary when you connect your computer for the first time� PHASE �������������������Use this item to adjust the clock...
Page 88
![Page 88
78
5. Using On-Screen Menu
Adjusting Horizontal/Vertical Position [HORIZONTAL/VERTICAL]
Adjusts the image location horizontally and vertically.
NOTE: The [HORIZONTAL] and [VERTICAL] items are not available for VIDEO, S-VIDEO, HDMI, VIEWER, NETWORK, and USB
DISPLAY.
- An image can be distorted during the adjustment of [CLOCK] and [PHASE]. This is not malfunction.
- The adjustments for [CLOCK], [PHASE], [HORIZONTAL], and [VERTICAL] will be stored in memory for the
current signal. The next...](http://img.usermanuals.tech/thumb/54/92038/w300_nec-m300ws-manual_d-87.png "Page 88
78
5. Using On-Screen Menu
Adjusting Horizontal/Vertical Position [HORIZONTAL/VERTICAL]
Adjusts the image location horizontally and vertically.
NOTE: The [HORIZONTAL] and [VERTICAL] items are not available for VIDEO, S-VIDEO, HDMI, VIEWER, NETWORK, and USB
DISPLAY.
- An image can be distorted during the adjustment of [CLOCK] and [PHASE]. This is not malfunction.
- The adjustments for [CLOCK], [PHASE], [HORIZONTAL], and [VERTICAL] will be stored in memory for the
current signal. The next...")
78 5. Using On-Screen Menu Adjusting Horizontal/Vertical Position [HORIZONTAL/VERTICAL] Adjusts the image location horizontally and vertically. NOTE: The [HORIZONTAL] and [VERTICAL] items are not available for VIDEO, S-VIDEO, HDMI, VIEWER, NETWORK, and USB DISPLAY. - An image can be distorted during the adjustment of [CLOCK] and [PHASE]. This is not malfunction. - The adjustments for [CLOCK], [PHASE], [HORIZONTAL], and [VERTICAL] will be stored in memory for the current signal. The next...
Page 89
![Page 89
79
5. Using On-Screen Menu
Selecting Aspect Ratio [ASPECT RATIO]
The term “aspect ratio” refers to the ratio of width to height of a projected image.
The projector automatically determines the incoming signal and displays it in its appropriate aspect ratio.
• This table shows typical resolutions and aspect ratios that most computers support.
ResolutionAspect RatioVGA 640 × 480 4:3
SVGA 800 × 600 4:3
XGA 1024 × 768 4:3
WXGA 1280 × 768 15:9
WXGA 1280 × 800 16:10
WXGA+ 1440 × 900 16:10
SXGA...](http://img.usermanuals.tech/thumb/54/92038/w300_nec-m300ws-manual_d-88.png "Page 89
79
5. Using On-Screen Menu
Selecting Aspect Ratio [ASPECT RATIO]
The term “aspect ratio” refers to the ratio of width to height of a projected image.
The projector automatically determines the incoming signal and displays it in its appropriate aspect ratio.
• This table shows typical resolutions and aspect ratios that most computers support.
ResolutionAspect RatioVGA 640 × 480 4:3
SVGA 800 × 600 4:3
XGA 1024 × 768 4:3
WXGA 1280 × 768 15:9
WXGA 1280 × 800 16:10
WXGA+ 1440 × 900 16:10
SXGA...")
79 5. Using On-Screen Menu Selecting Aspect Ratio [ASPECT RATIO] The term “aspect ratio” refers to the ratio of width to height of a projected image. The projector automatically determines the incoming signal and displays it in its appropriate aspect ratio. • This table shows typical resolutions and aspect ratios that most computers support. ResolutionAspect RatioVGA 640 × 480 4:3 SVGA 800 × 600 4:3 XGA 1024 × 768 4:3 WXGA 1280 × 768 15:9 WXGA 1280 × 800 16:10 WXGA+ 1440 × 900 16:10 SXGA...
Page 90
![Page 90
80
5. Using On-Screen Menu
Sample image when the appropriate aspect ratio is automatically determined
M350X/M300X/M260X/M230X/M420X/M420XV/M350XS/M300XS/M260XS
[Computer signal]
Aspect ratio of incoming signal4:35:416:9 15:916:10
Sample image when the appro-priate aspect ratio is automati-
cally determined
[Video signal]
Aspect ratio of incoming signal4:3 Letterbox Squeeze
Sample image when the as-pect ratio is automatically de-
termined
NOTE: To display a squeezed signal prop-erly, select [16:9]...](http://img.usermanuals.tech/thumb/54/92038/w300_nec-m300ws-manual_d-89.png "Page 90
80
5. Using On-Screen Menu
Sample image when the appropriate aspect ratio is automatically determined
M350X/M300X/M260X/M230X/M420X/M420XV/M350XS/M300XS/M260XS
[Computer signal]
Aspect ratio of incoming signal4:35:416:9 15:916:10
Sample image when the appro-priate aspect ratio is automati-
cally determined
[Video signal]
Aspect ratio of incoming signal4:3 Letterbox Squeeze
Sample image when the as-pect ratio is automatically de-
termined
NOTE: To display a squeezed signal prop-erly, select [16:9]...")
80 5. Using On-Screen Menu Sample image when the appropriate aspect ratio is automatically determined M350X/M300X/M260X/M230X/M420X/M420XV/M350XS/M300XS/M260XS [Computer signal] Aspect ratio of incoming signal4:35:416:9 15:916:10 Sample image when the appro-priate aspect ratio is automati- cally determined [Video signal] Aspect ratio of incoming signal4:3 Letterbox Squeeze Sample image when the as-pect ratio is automatically de- termined NOTE: To display a squeezed signal prop-erly, select [16:9]...