NEC M260xs Portable Projector Users Manual
Have a look at the manual NEC M260xs Portable Projector Users Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 106
96
5. Using On-Screen Menu
[VERSION]
[FIRMWARE] Version
[DATA] Version
[OTHERS]
[PROJECTOR NAME]
[MODEL NO.]
[SERIAL NUMBER]
[LAN UNIT TYPE]
[CONTROL ID] (when [CONTROL ID] is set)](http://img.usermanuals.tech/thumb/54/92027/w64_nec-m260xs-manual_d-105.png "Page 106
96
5. Using On-Screen Menu
[VERSION]
[FIRMWARE] Version
[DATA] Version
[OTHERS]
[PROJECTOR NAME]
[MODEL NO.]
[SERIAL NUMBER]
[LAN UNIT TYPE]
[CONTROL ID] (when [CONTROL ID] is set)")
![Page 107
97
5. Using On-Screen Menu
Menu Descriptions & Functions [RESET]
Returning to Factory Default [RESET]
The RESET feature allows you to change adjustments and settings to the factory preset for a (all) source (s) except
the following:
[CURRENT SIGNAL]
Resets the adjustments for the current signal to the factory preset levels.
The items that can be reset are: [PRESET], [CONTRAST], [BRIGHTNESS], [COLOR], [HUE], [SHARPNESS],
[ASPECT RATIO], [HORIZONTAL], [VERTICAL], [CLOCK], [PHASE], and...](http://img.usermanuals.tech/thumb/54/92027/w64_nec-m260xs-manual_d-106.png "Page 107
97
5. Using On-Screen Menu
Menu Descriptions & Functions [RESET]
Returning to Factory Default [RESET]
The RESET feature allows you to change adjustments and settings to the factory preset for a (all) source (s) except
the following:
[CURRENT SIGNAL]
Resets the adjustments for the current signal to the factory preset levels.
The items that can be reset are: [PRESET], [CONTRAST], [BRIGHTNESS], [COLOR], [HUE], [SHARPNESS],
[ASPECT RATIO], [HORIZONTAL], [VERTICAL], [CLOCK], [PHASE], and...")
![Page 109
99
6. Installation and Connections
[M420X/M420XV]
The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is
approximately 25" (0.64 m) measured diagonally when the projector is roughly 34 inches (0.9 m) from the wall or
screen. The largest the image can be is 300" (7.6 m) when the projector is about 434 inches (11.0 m) from the wall
or screen.
300
240
Distance
(Unit: m/inch)
Lens center Screen Size
Screen...](http://img.usermanuals.tech/thumb/54/92027/w64_nec-m260xs-manual_d-108.png "Page 109
99
6. Installation and Connections
[M420X/M420XV]
The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is
approximately 25\" (0.64 m) measured diagonally when the projector is roughly 34 inches (0.9 m) from the wall or
screen. The largest the image can be is 300\" (7.6 m) when the projector is about 434 inches (11.0 m) from the wall
or screen.
300
240
Distance
(Unit: m/inch)
Lens center Screen Size
Screen...")
![Page 110
100
6. Installation and Connections
[M350XS/M300XS/M260XS]
The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is ap-
proximately 60" (1.52 m) measured diagonally when the projector is 23 inches (0.57 m) from the wall or screen. The
largest the image can be is 110" (2.8 m) when the projector is about 43 inches (1.1 m) from the wall or screen.
Distance
(Unit: m/inch)
Lens center Screen Size
110
100
90
84
80...](http://img.usermanuals.tech/thumb/54/92027/w64_nec-m260xs-manual_d-109.png "Page 110
100
6. Installation and Connections
[M350XS/M300XS/M260XS]
The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is ap-
proximately 60\" (1.52 m) measured diagonally when the projector is 23 inches (0.57 m) from the wall or screen. The
largest the image can be is 110\" (2.8 m) when the projector is about 43 inches (1.1 m) from the wall or screen.
Distance
(Unit: m/inch)
Lens center Screen Size
110
100
90
84
80...")
![Page 112
102
6. Installation and Connections
[M300W/M260W]
Screen SizeBC
Dα
Diagonal WidthHeight widetele widetele
inch mminch mminch mminch mminch mm -inch mminch mmdegree -degree
25 635 21538 13337 5139 27 687 -46 1172 -1 -29
11�4 -6�8 30762 25646 16404 7167 33 833 -56 1415 -1 -35 11�3 -6�7 401016 34862 21538 9222 44 1126 -75 1902 -2 -47 11�2 -6�7 601524 511292 32808 13333 67 1712 -113 2876 -3 -71 11�0 -6�6 721829 611551 38969 16400 81 2064 -136 3461 -3 -85 11�0 -6�6 802032 681723 421077 17444...](http://img.usermanuals.tech/thumb/54/92027/w64_nec-m260xs-manual_d-111.png "Page 112
102
6. Installation and Connections
[M300W/M260W]
Screen SizeBC
Dα
Diagonal WidthHeight widetele widetele
inch mminch mminch mminch mminch mm -inch mminch mmdegree -degree
25 635 21538 13337 5139 27 687 -46 1172 -1 -29
11�4 -6�8 30762 25646 16404 7167 33 833 -56 1415 -1 -35 11�3 -6�7 401016 34862 21538 9222 44 1126 -75 1902 -2 -47 11�2 -6�7 601524 511292 32808 13333 67 1712 -113 2876 -3 -71 11�0 -6�6 721829 611551 38969 16400 81 2064 -136 3461 -3 -85 11�0 -6�6 802032 681723 421077 17444...")
101 6. Installation and Connections C α B D Throw Distance and Screen Size The following shows the proper relative positions of the projector and screen. Refer to the table to determine the position of installation. Distance Chart B = Ver tical distance between lens center and screen center C = Throw distance D = Ver tical distance between lens center and screen bottom (top of screen for ceiling ap- plication) α = Throw angle NOTE: The values in the tables are design values and may vary. [M350X/M300X/M260X/M230X] Screen SizeB C Dα Diagonal WidthHeight widetele widetele inch mminch mminch mminch mminch mm -inch mminch mmdegree -degree 25 635 20508 15381 5131 26 649 -44 1107 -2 -60 11�4 -6�7 30762 24610 18457 6157 31 788 -53 1337 -3 -71 11�3 -6�7 401016 32813 24610 8210 42 1066 -71 1798 -4 -95 11�1 -6�6 601524 481219 36914 12314 64 1622 -107 2720 -6 -143 11�0 -6�6 721829 581463 431097 15377 77 1956 -129 3273 -7 -171 10�9 -6�6 802032 641626 481219 17419 86 2178 -143 3642 -8 -191 10�9 -6�6 842134 671707 501280 17440 90 2289 -151 3827 -8 -200 10�9 -6�6 902286 721829 541372 19471 97 2456 -162 4103 -8 -214 10�9 -6�6 100 2540 802032 601524 21524 108 2734 -180 4564 -9 -238 10�8 -6�5 120 3048 962438 721829 25629 130 3290 -216 5486 -11 -286 10�8 -6�5 1503810 1203048 902286 31786 162 4124 -270 6869 -14 -357 10�8 -6�5 1804572 1443658 1082743 37943 195 4958 -325 8252 -17 -429 10�8 -6�5 2005080 1604064 1203048 411048 217 5514 -361 9174 -19 -476 10�8 -6�5 2105334 1684267 1263200 431100 228 5792 -379 9635 -20 -500 10�8 -6�5 2406096 1924877 1443658 501257 261 6626 -434 11018 -23 -572 10�7 -6�5 2706858 2165486 1624115 561414 294 7460 -488 12401 -25 -643 10�7 -6�5 3007620 2406096 1804572 621572 327 8294 -543 13784 -28 -714 10�7 -6�5 [M420X/M420XV] Screen SizeB C Dα Diagonal WidthHeight widetele widetele inch mminch mminch mminch mminch mm -inch mminch mmdegree -degree 25 635 20508 15381 5131 25 636 -43 1094 -2 -60 11�6 -6�8 30762 24610 18457 6157 31 775 -52 1324 -3 -71 11�5 -6�8 401016 32813 24610 8210 41 1053 -70 1785 -4 -95 11�3 -6�7 601524 481219 36914 12314 63 1609 -107 2707 -6 -143 11�1 -6�6 721829 581463 431097 15377 76 1943 -128 3261 -7 -171 11�0 -6�6 802032 641626 481219 17419 85 2165 -143 3629 -8 -191 11�0 -6�6 842134 671707 501280 17440 90 2277 -150 3814 -8 -200 10�9 -6�6 902286 721829 541372 19471 96 2443 -161 4090 -8 -214 10�9 -6�6 100 2540 802032 601524 21524 107 2721 -179 4551 -9 -238 10�9 -6�6 120 3048 962438 721829 25629 129 3277 -215 5473 -11 -286 10�9 -6�6 1503810 1203048 902286 31786 162 4111 -270 6856 -14 -357 10�8 -6�5 1804572 1443658 1082743 37943 195 4945 -324 8239 -17 -429 10�8 -6�5 2005080 1604064 1203048 411048 217 5501 -361 9161 -19 -476 10�8 -6�5 2105334 1684267 1263200 431100 228 5779 -379 9622 -20 -500 10�8 -6�5 2406096 1924877 1443658 501257 260 6613 -433 11005 -23 -572 10�8 -6�5 2706858 2165486 1624115 561414 293 7447 -488 12388 -25 -643 10�8 -6�5 3007620 2406096 1804572 621572 326 8281 -542 13771 -28 -714 10�7 -6�5 Screen center Lens center Screen bottom
102 6. Installation and Connections [M300W/M260W] Screen SizeBC Dα Diagonal WidthHeight widetele widetele inch mminch mminch mminch mminch mm -inch mminch mmdegree -degree 25 635 21538 13337 5139 27 687 -46 1172 -1 -29 11�4 -6�8 30762 25646 16404 7167 33 833 -56 1415 -1 -35 11�3 -6�7 401016 34862 21538 9222 44 1126 -75 1902 -2 -47 11�2 -6�7 601524 511292 32808 13333 67 1712 -113 2876 -3 -71 11�0 -6�6 721829 611551 38969 16400 81 2064 -136 3461 -3 -85 11�0 -6�6 802032 681723 421077 17444 90 2298 -152 3850 -4 -94 10�9 -6�6 842134 711809 451131 18466 95 2415 -159 4045 -4 -99 10�9 -6�6 902286 761939 481212 20500 102 2591 -171 4337 -4 -106 10�9 -6�6 100 2540 852154 531346 22555 114 2884 -190 4824 -5 -118 10�9 -6�6 120 3048 1022585 641615 26666 137 3470 -228 5798 -6 -141 10�9 -6�6 150 3810 1273231 792019 33833 171 4349 -286 7259 -7 -177 10�8 -6�5 180 4572 1533877 952423 391000 206 5228 -343 8720 -8 -212 10�8 -6�5 200 5080 1704308 1062692 441111 229 5814 -382 9694 -9 -236 10�8 -6�5 210 5334 1784523 1112827 461166 240 6107 -401 10181 -10 -247 10�8 -6�5 2406096 2045169 1273231 521333 275 6986 -458 11642 -11 -283 10�8 -6�5 2706858 2295816 1433635 591499 310 7865 -516 13103 -13 -318 10�8 -6�5 3007620 2546462 1594039 661666 344 8744 -573 14564 -14 -353 10�8 -6�5 [M350XS/M300XS/M260XS] Screen SizeB C Dα Diagonal WidthHeight widewide inch mminch mminch mminch mminch mminch mmdegree 60 1524 481219 36914 18457 23573 00 38�6721829 581463 431097 22549 28700 0038�1802032 641626 481219 24610 31784 0037�9842134 671707 501280 25640 33827 0037�7902286 721829 541372 27686 35890 0037�61002540 802032 601524 30762 39996 0037�41102794 882235 661676 33838 431101 0037�3 [M300WS/M260WS] Screen SizeB C Dα Diagonal WidthHeight widewide inch mminch mminch mminch mminch mminch mmdegree 56�21427 481211 30757 18454 22569 37638�6601524 511292 32808 19485 24611 38138�4701778 591508 37942 22565 28723 49438�0802032 681723 421077 25646 33835 410837�7902286 761939 481212 29727 37947 512137�5100 2540 852154 531346 32808 421059 513537�3104 2642 882240 551400 33840 431104 614037�3
103 6. Installation and Connections WARNING * Installing your projector on the ceiling must be done by a qualified technician. Contact your NEC dealer for more information. * Do not attempt to install the projector yourself. • Only use your projector on a solid, level surface. If the projector falls to the ground, you can be injured and the projector severely damaged. • Do not use the projector where temperatures vary greatly. The projector must be used at temperatures between 41°F (5°C) and 104°F (40°C) (Eco mode se- lected automatically at 95°F to 104°F/35°C to 40°C). • Do not expose the projector to moisture, dust, or smoke. This will harm the screen image. • Ensure that you have adequate ventilation around your projector so heat can dissipate. Do not cover the vents on the side or the front of the projector. Reflecting the Image Using a mirror to reflect your projector’s image enables you to enjoy a much larger image when a smaller space is required. Contact your NEC dealer if you need a mirror system. If you’re using a mirror system and your image is inverted, use the MENU and buttons on your projector cabinet or your remote control to correct the orientation. (→ page 85)
104 6. Installation and Connections COMPUTER 1 INCOMPUTER 1 INHDMI INUSB(PC) AUDIO IN HDMI IN USB(PC) Computer cable (VGA) (supplied)To mini D-Sub 15-pin connector on the projector. It is recommended that you use a commercially avail- able distribution amplifier if connecting a signal cable longer than the cable supplied. A commercially available USB cable (compatible with USB 2.0 specifications) NOTE: For Macintosh, use a commercially available pin adapter (not supplied) to connect to your Mac’s video port. Stereo mini-plug audio cable (not supplied) Making Connections NOTE: When using with a notebook PC, be sure to connect the projector and notebook PC while the projector is in standby mode and before turning on the power to the notebook PC. In most cases the output signal from the notebook PC is not turned on unless connected to the projector before being powered up. * If the screen goes blank while using your remote control, it may be the result of the computer’s screen-saver or power manage- ment software. Enabling the computer’s external display Displaying an image on the notebook PC’s screen does not necessarily mean it outputs a signal to the projector. When using a PC compatible laptop, a combination of function keys will enable/disable the external display. Usually, the combination of the “Fn” key along with one of the 12 function keys gets the external display to come on or off. For example, NEC laptops use Fn + F3, while Dell laptops use Fn + F8 key combinations to toggle through external display selections. Connecting Your Computer NOTE: Signals supported by Plug & Play (DDC2) INPUT COMPUTER 1 IN COMPUTER 2 IN HDMI analog analog digital Yes YesYes HDMI cable (not supplied) Use High Speed HDMI® Cable. NOTE: The M420XV does not come with the AUDIO IN connector (stereo mini jack). M420XV
105 6. Installation and Connections • Select the source name for its appropriate input connector after turning on the projector. Input connectorSOURCE button on the projector cabinetButton on the remote control COMPUTER 1 IN COMPUTER 1(COMPUTER 1) COMPUTER 2 IN COMPUTER 2(COMPUTER 2) HDMI IN HDMIHDMI USB (PC) USB DISPLAY(USB DISPLAY) NOTE: The projector is not compatible with video decoded outputs of the NEC ISS-6020 switcher. NOTE: An image may not be displayed correctly when a Video or S-Video source is played back via a commercially available scan converter. This is because the projector will process a video signal as a computer signal at the default setting. In that case, do the following. * When an image is displayed with the lower and upper black portion of the screen or a dark image is not displayed correctly: Project an image to fill the screen and then press the AUTO ADJ. button on the remote control or the projector cabinet.
106 6. Installation and Connections Connecting an External Monitor You can connect a separate, external monitor to your projector to simultaneously view on a monitor the computer analog image you’re projecting. NOTE: • Daisy chain connection is not possible. • When audio equipment is connected, the projector speaker is disabled. • The M420XV does not come with the AUDIO OUT connector (stereo mini jack). AUDIO INPHONE MONITOR OUT (COMP . 1) AUDIO OUT MONITOR OUT (COMP . 1) Com- puter cable (VGA) (supplied) Stereo mini-plug audio cable (not supplied) Computer cable (VGA) (not supplied) M420XV
107 6. Installation and Connections Connecting Your DVD Player or Other AV Equipment Connecting Video/S-Video Input • Select the source name for its appropriate input connector after turning on the projector. Input connectorSOURCE button on the projector cabinetButton on the remote control VIDEO IN VIDEO(VIDEO) S-VIDEO IN S-VIDEO(S-VIDEO) NOTE: • The AUDIO IN L and R jacks (RCA) are shared between the Video and S-Video inputs. • The M420XV does not come with the AUDIO IN connectors (RCA). NOTE: Refer to your VCR owner’s manual for more information about your equipment’s video output requirements. NOTE: An image may not be displayed correctly when a Video or S-Video source is played back in fast-forward or fast-rewind via a scan converter. AUDIO OUT VIDEO OUTS-VIDEO VIDEO LRAUDIO INLR S-VIDEO IN VIDEO INS-VIDEO IN VIDEO IN AUDIO IN Audio cable (not supplied)S-Video cable (not supplied) Video cable (not supplied)Audio equipment Audio cable (not supplied) M420XV
108 6. Installation and Connections Connecting Component Input A component signal will be automatically displayed. If not, from the menu, select [SETUP] → [OPTIONS(1)] → [SIGNAL SELECT] → [COMPUTER1] or [COMPUTER2], and then place a check mark in the Component radio button. • Select the source name for its appropriate input connector after turning on the projector. Input connectorSOURCE button on the projector cabinetButton on the remote control COMPUTER 1 IN COMPUTER 1(COMPUTER 1) COMPUTER 2 IN COMPUTER 2(COMPUTER 2) NOTE: Refer to your DVD player’s owner’s manual for more information about your DVD player’s video output requirements. NOTE: The M420XV does not come with the AUDIO IN connector. AUDIO INLR AUDIO OUT LR Component YCbCr AUDIO IN COMPUTER 1 INCOMPUTER 1 IN Audio cable (not supplied) 15-pin - to - RCA (female) × 3 cable adapter (ADP-CV1E) Stereo mini plug - to - RCA audio cable (not supplied) Component video RCA × 3 cable (not supplied) DVD player Audio Equipment M420XV
109 6. Installation and Connections AUDIO INLRAUDIO OUTLRVIDEO OUTHDMI OUTS-VIDEO VIDEO HDMI Output HDMIHDMI H D M I HDMI IN HDMI IN Connecting HDMI Input You can connect the HDMI output of your DVD player, hard disk player, Blu-ray player, or notebook type PC to the HDMI IN connector of your projector. NOTE: The HDMI IN connector supports Plug & Play (DDC2B). Audio cable (not supplied) HDMI cable (not supplied)Use High Speed HDMI® Cable. Input connectorSOURCE button on the projector cabinetButton on the remote control HDMI IN HDMIHDMI TIP: For users of audio video equipment with an HDMI connector: Select “Enhanced” rather than “Normal” if HDMI output is switchable between “Enhanced” and “Normal”. This will provide improved image contrast and more detailed dark areas. For more information on settings, refer to the instruction manual of the audio video equipment to be connected. • When connecting the HDMI IN connector of the projector to the DVD player, the projector’s video level can be made settings in accordance with the DVD player’s video level. In the menu select [HDMI SETTINGS] → [VIDEO LEVEL] and make necessary settings. • If the HDMI input sound cannot be heard, in the menu select [HDMI SETTINGS] → [AUDIO SELECT] → [HDMI]. Note that the [AUDIO SELECT] is not available on M420XV. M420XV
110 6. Installation and Connections Connecting to a Wired LAN The projector comes standard with a LAN port (RJ-45) which provides a LAN connection using a LAN cable. To use a LAN connection, you are required to set the LAN on the projector menu. Select [SETUP] → [WIRED LAN]. (→ page 91). Example of LAN connection Example of wired LAN connection LAN Server Hub LAN cable (not supplied) NOTE: Use a Category 5 or higher LAN cable.