NEC Lt84 Projector Users Manual

							EÐ21
Auto Adjust:
When ÒAuto AdjustÓ is set to ÒOnÓ, the  projector automatically
determines the best resolution for the current RGB input signal
to project an image using NECÕs Advanced AccuBlend Intelli-
gent Pixel Blending Technology.
The image can be automatically adjusted for position and stabil-
ity; ÒHorizontal PositionÓ, ÒVertical PositionÓ and ÒPixel Adjust.Ó
On: Automatically adjusts image ÒHorizontal PositionÓ, ÒVer-
tical PositionÓ and ÒPixel Adjust.Ó
Off: User can adjust the image display functions (ÒHorizontal
PositionÓ, ÒVertical PositionÓ and ÒPixel AdjustÓ) manu-
ally.
Horizontal/Vertical Position (when Auto Adjust is off):
Adjusts the image location from left to right.
This adjustment is made automatically when the Auto Adjust is
turned on.
Pixel Adjust (when Auto Adjust is off):
Displays the Clock and Phase adjustments.
Clock: Use this item with the ÒAuto Adjust onÓ to fine tune the
computer image or to remove any vertical banding that
might appear. This function adjusts the clock frequen-
cies that eliminate the horizontal banding in the image.
Press the § and © buttons until the banding disappears.
This adjustment may be necessary when you connect your
computer for the first time. This adjustment is made au-
tomatically when the Auto Adjust is turned on.
Phase: Use this item to adjust the clock phase or to reduce video
noise, dot interference or cross talk. (This is evident when
part of your image appears to be shimmering.) Use the
§ and © buttons to adjust the image.
Use ÒPhaseÓ only after the ÒClockÓ is complete.
This adjustment is made automatically when the Auto
Adjust is turned on.
Resolution (when Auto Adjust is off):
This allows you to activate or deactivate the Advanced AccuBlend
feature.
Auto: Turns on the Advanced AccuBlend feature. The projec-
tor automatically reduces or enlarges the current image
to fit the full screen.
Native: Turns off the Advanced AccuBlend feature. The projec-
tor displays the current image in its true resolution.
NOTE: While you are displaying an image with higher resolu-
tion than the projectors native resolution, even when you are in
the Native mode, the image is displayed full screen using the
Advanced AccuBlend feature.
Color Temperature
This feature adjusts the color temperature using the slide bar.
Move the slide bar to the right to increase the color temperature for a
bluish image; to the left to decrease it for a reddish image.
Keystone
This feature corrects the keystone (trapezoidal) distortion to make
the top of the screen longer or shorter to be the same as the bottom.
Use the § or © buttons on the slide bar to correct the keystone
(trapezoidal) distortion.
NOTE: The maximum keystone angle that can be corrected is 15
degrees upward and downward with the projector placed horizon-
tally. However, a picture will be blurred if you correct the keystone
angle beyond +12 degrees or more for SXGA signal on LT84.
Factory Default
Image Options
Image Mode
Video Mode
Image Mode
Aspect Ratio
Color Temperature
Aspect Ratio
Normal Zoom
Cinema
Wide Zoom
Factory Default
All Data Current Signal Restore to Factory Setting
Cancel
OK
Changes all adjustments and setting to the factory preset for each
source individually except Lamp Usage Hours. (To reset the lamp
usage time, see ÒClear Lamp Hour MeterÓ on page E-33.
All Data:Reset  all  the  adjustments  and  settings for all
the signals to the factory preset.
Current Signal:Resets the adjustments for the current signal to
the factory preset levels.
Image Options
Provides optional controls such as aspect
ratio, gamma correction, and color ma-
trix noise reduction features.
Image Mode
Allows you to select the item you want to adjust.
NOTE: Aspect Ratio is not available for ÒPC Card ViewerÓ and RGB
source.
Aspect Ratio:
Allows you to choose the best screen size mode to fit on the screen.
Normal: Displays normal video picture with a 4-to-3 aspect
ratio as is.
Zoom: Displays DVDÕs video picture with a 16-to-9 aspect
ratio expanded in the horizontal and vertical direc-
tion, maintaining  the original proportion.
Wide Zoom: Displays DVDÕs squeezed video picture with a 16-
to-9 aspect ratio expanded in the horizontal direction,
converted to 4-to-3 aspect ratio.
Cinema: Displays DVDÕs squeeze video picture with a 16-to-
9 aspect ratio compressed in the vertical direction,
maintaining the 16-to-9 aspect ratio. 
						

							EÐ22 Video Mode
Gamma:
Video Mode
Gamma
Noise Reduction
Color MatrixProjector Options
Menu
Setup
Menu
Language
English
Projector Pointer
Pointer 1
Source Display
Off On
You can select one of the following three levels for reducing video
noise to your preference.
NOTE: The lower the Noise Reduction level, the better the im-
age quality by way of higher video bandwidth.
Color Matrix
Projector Options
Enables you to set preferences and other
operating options.
Menu
Gamma
Normal Natural 1
Natural 2
Use the § or © buttons to choose ÒNormalÓ when in a lighted
room and ÒNatural 1&2Ó when in a darkened room. ÒNatural 1Ó
for better flesh tone; ÒNatural 2Ó for true reproduction of middle
tones.
Each mode is recommnded for :
Normal: TV programs
Natural1: Movie such as an action film
Natural2: Movie with many dark scenes
NOTE: A frame may freeze for a brief period of time when a
video is played back in fast-forward or fast-rewind with a Video
or S-Video source. If this happens, select the Natural 1 or 2 mode.
Noise Reduction:
Noise Reduction
Off Low
MediumHigh
Color Matrix
Select Color Matrix
SDTV HDTV
Select Color Matrix Type
Cb/Cr B-Y/R-YPb/Pr
First  select an appropriate color matrix to fit your component
signal for HDTV or SDTV. Then select an appropriate matrix
type from B-Y/R-Y, Cb/Cr or Pb/Pr.
NOTE:  The  Color Matrix feature is available for composite
video, S-Video, and component signals only.Allows you to set preferences for the on-screen menu.
Language:
You can choose one of seven languages for on-screen instruc-
tions. The options are: English, German, French, Italian, Span-
ish, Swedish and Japanese.
Projector Pointer:
This enables you to select from eight different Pointer icons for
the ÒPointerÓ button on your remote control.
After moving your Pointer icon to the area you want on the screen,
press the Magnify button on the remote control to enlarge the
selected area on the screen.
NOTE: There may be cases where the Pointer function is not avail-
able for a non-interlace signal at 15kHz such as video game.
Source Display:
You can turn on and off the information for input name such as
VIDEO and RGB.
When this option is on, the current input will be displayed each
time you switch sources or turn on the projector. 
						

							EÐ23
Setup
Orientation Page1 Page2 Page3
Front Floor
Background
BlueSignal Select
S-VIDEO
Auto VIDEO
Auto RGB
Auto
OKCancel
Setup
Enables you to set operating options.
Press ÒOKÓ to save your changes for all the features of Page1, Page2
and Page3.
[Page1]
Setup
Page1
Mouse
Button
Right Hand Left HandAuto Start Page2 Page3
Power Management
Power Off Confirmation
Keystone Save
Clear Lamp Hour Mater
White Segment
OKCancel
Sensitivity
Fast MediumSlow
Orientation:
This reorients your image for your type of projection.
The options are:front floor projection, rear ceiling projection, rear
floor projection, and front ceiling projection.
Background:
Use this feature to display a black, blue screen or logo when no
signal is available.
Signal Select:

Allows you to choose RGB for an RGB source such as a com-
puter, or Component for a component video source such as a
DVD player. Normally select Auto and the projector automati-
cally detects a component signal. However there may be some
component signals that the projector is unable to detect. If this is
the case, select Component.

This feature enables you to select composite video standards
manually. Normally select Auto.
Select the video standard from the pull-down menu.
This must be done for Video and S-Video separately.
NOTE: The standard video signal NTSC4.43 and PAL60 must be
selected because it cannot be automatically detected.[Page2]
Mouse Settings:
This option lets you to change your USB mouse settings. The
mouse settings feature is available for USB mouse only. Choose
the settings you want:
Mouse Button: ÒRight HandÓ or ÒLeft HandÓ
Mouse Sensitivity: ÒFastÓ, ÒMediumÓ or ÒSlowÓ
Auto Start:
Turns the projector on automatically when the power cable is
inserted into an active power outlet. This eliminates the need to
always use the ÒPowerÓ button on the optional remote control or
projector cabinet.
Power Management:
When this option is on and there is no RGB input for five min-
utes or more, the projector will automatically turn itself off.
Power Off Confirmation:
This option determines whether a confirmation dialog for turn-
ing off the projector will appear or not.
Keystone Save:
This option enables you to save your current keystone settings.
Saving your change once affects all sources. The changes are
saved when you turn off the projector.
White Segment:
You can put emphasis on either brightness or color for a pro-
jected image.
If you prefer putting emphasis on brightness, place a checkmark
in the box to turn the option on. If you prefer an image in truer
color, turn off this option.
Clear Lamp Hour Meter:
Resets the lamp clock back to zero. Pressing this button appears
a confirmation dialog box. To reset the lamp usage hour, press
ÒOKÓ.
NOTE: The projector will turn off and go into standby mode af-
ter 1100 hours of service. If this happens, press the ÒHelpÓ but-
ton on the remote control for ten seconds to reset the lamp clock
back to zero. Do this only after replacing the lamp. 
						

							EÐ24
Tools
Capture
PC Card Files
ChalkBoard
[Page 3]
Setup
Page1
PC Card Viewer Options
Start Mode
Show Folder ListManual Play Auto Play
Auto Play Interval
sec
15 Page2 Page3
OKCancel
Capture OptionsHigh QualityHigh CompressionNormal
PC Card Viewer Options
Start Mode
Sets the starting condition when PC Card Viewer input is selected
on the projector.
Show Folder List
When PC Card Viewer input is selected on the projector, the folder
lists will be displayed and allows you to select the presentation
from a CompactFlash card.
Auto Play
If  this option is checked ,  any given slide will start to play auto-
matically. You can also specify interval between 5 and 300 sec-
onds using Auto Play Interval.
Manual Play
Views a slide manually when PC Card Viewer input is selected.
NOTE: The Auto Play and Manual Play options determine the
behavior of the Play/Stop [  /  ] icon on the Viewer tool bar.
When selecting ÒShow Folder ListÓ or ÒManual PlayÓ while the
ÒAuto PlayÓ feature is not checked, and you select PC Card Viewer
for the input source,  you can manually advance to the next slide
or the preivious slide.
NOTE: If you check  ÒAuto PlayÓ and select ÒPC Card ViewerÓ
on the projector,  the slides will automatically start to play back
from any given slide.
Capture Options (available for JPEG only)
These options are used for the Capture function which you can
select from Tools. You have three options for JPEG compression
quality: High quality, Normal and High Compression.
High Quality
Gives quality of JPEG a priority.
Normal
Gives normal JPEG quality.
High Compression
Gives compression a priority.
Tools
Provides tools for capturing images, dis-
playing files in a CompactFlash Card and
drawing.
NOTE: The ÒToolsÓ feature is required
for a CompactFlash card.
Capture
Allows you to capture an image from a source that is currently being
displayed. The image is saved as JPEG in the CompactFlash card.
When you select Capture from the menu, you will get a tool bar. You
can capture an image directly using the tool bar when the menu is
not displayed.
The tool bar includes the following buttons:
CaptureExit
Freeze
Drag
Drag: Drags to move the tool bar. (for USB mouse operation
only)
Capture:Captures an image and save it as a JPEG file in a PC
card.
Freeze: Freezes and unfreezes images.
Exit: Exits the Capture function.
Unless a CompactFlash memory card is inserted into the PC Card
Access slot of the projector, the Capture feature is not available.
The Card Error display means that the free space of the
CompactFlash card is insufficient for saving images. Make more space
available on the card by erasing unwanted images with your PC. The
number of images that can be captured depends on the size of the
CompactFlash card.
NOTE: Be sure not to turn off the power or remove the CompactFlash
card while capturing an image. Doing so could cause a loss of the
data in the CompactFlash card or damage to the card itself.
NOTE: Captured images with higher resolution than the projectors
native resolution cannot be displayed correctly. 
						

							EÐ25
PC Card Files
File Name Size Date
@.
@..
12345678.txt
12345678.bmp
12345678.htm

1234567890
1234567890
12345678901999/06/01 HH:MM
1999/06/01 HH:MM
1999/06/17 HH:MM
1999/06/17 HH:MM
1999/06/17 HH:MMExecute
Exit
Sort
Name (abc..)
All (*. *) File Group
Free Space
Path
/
Info.
5 Files
Help
Contents
Source Information
Projector Information
PC Card Files
Displays a list of all the files stored in the CompactFlash card so that
you can select a file you want to display. You can also sort files by file
name or date, or display the file.
Although a list of all the files in the CompactFlash card is displayed,
you can view files in text, HTML, JPEG and BMP format only.
Selecting ÒExecuteÓ displays the file you selected.
ChalkBoard (available only when using with a USB mouse)
Provides the tool bar for producing freehand drawings.
Pen: Left-click and drag to draw. Right-click to display the
pen palette containing four lines of different thickness
from which you can select a line you prefer by left-
clicking.
Erase: Left-click and drag to erase part of a drawing. Right-
click to display the eraser palette containing four eraser
of different thickness from which you can select an
eraser you prefer by left-clicking.
Clear: Clears the drawing completely from the ChalkBoard
screen.
Color: Selects a color. Left-click to display the color palette
from which you can select a color you prefer by left-
clicking.
View: Hides the tool bar by left-clicking. Right-clicking any-
where on the screen displays the ChalkBoard tool bar
again.
Exit: Clears the complete drawing and exits the ChalkBoard.
NOTE:
* The ChalkBoard feature is available only when a USB mouse is
used. Free-hand drawings cannot be saved or captured.
* The main menu is not available while you display the ChalkBoard
screen.
* The Capture and the Source Display function are not available on
ChalkBoard screen.
* Switching slides clears a drawing completely.
* Selecting BMP and JPEG files automatically switches to the PC
Card Viewer source.
Help
Contents
Provides an online help about how to use
the menus. An underlined link means that
you can move to an adjustment item di-
rectly. Selecting the underlined link and
pressing ENTER moves to the corre-
sponding adjustment item.
Source Information
Displays the status of the current signal.
This dialog box has three pages.
Projector Information
Displays the lamp usage hours. 
						

							EÐ26
Using the PC Card Viewer function
NOTE:
When using the supplied software (CD-ROM)
The software is designed to use with a personal computer only. Do
not play the software on CD player. Doing so could cause damage to
speakers.
Features
The Viewer feature allows slides stored on a CompactFlash  memory
card (referred to as CompactFlash card in this manual) to be dis-
played on the projector.  Even if no computer is available, presenta-
tions can be conducted simply with the projector.  This feature is
convenient for holding presentations at meetings and in offices, as
well as for playing images taken on digital cameras.
Easy to use
¥ Presentations can be started immediately simply by inserting a
CompactFlash card (not supplied)
¥ Easy slide switching
¥ Remote control operation
¥ Jumping to list of slides or any specific slide
High quality images
¥ High resolution up to 10242768 dots(LT84: up to 8002600
dots)
¥ 24-bit full color playback
¥ Viewing of digital camera images
Simple utility software (for computer)
¥ PC Card Viewer software operable on Windows 95/NT
¥ Slides can be created by capturing the currently displayed im-
age
¥ Control screen for displaying lists of slides and editing
¥ Automatic slide conversion of files created with Microsoft
PowerPoint 95 and 97
* Microsoft, Windows and PowerPoint are registered trademarks
of Microsoft Corporation.
Inserting and Ejecting a CompactFlash Card
A CompactFlash card is used to view presentation data prepared on
the computer and to capture and play images projected with the pro-
jector.
PC CARD
ACCESS
PC CARD
ACCESSEject button
PC-Card
Adapter
Inserting the CompactFlash Card
¥ Hold the CompactFlash card horizontally and insert it slowly
into card slot with its top facing up.
¥ The eject button pops out once the CompactFlash card is fully
inserted.
Check that the CompactFlash card is fully inserted.
NOTE:  Do not try to force the CompactFlash card into the slot.
Ejecting the CompactFlash Card
Press the eject button.  The CompactFlash card pops out a little.  Grasp
the edges of the CompactFlash card and pull it out.  Do not eject the
CompactFlash card while its data is being accessed.
Install the CompactFlash card on a PC card adapter when using on
your PC.
¥ Set the CompactFlash card in the direction shown in the dia-
gram and insert it into the card adapter.
Card adapter (not supplied)
CompactFlash card
(not supplied)
Direction for Inserting the CompactFlash Card
The CompactFlash card has a top and bottom and must be in-
serted into the CompactFlash card slot in a specific direction.  It
cannot be inserted backwards or upside-down.  Attempting to force
it into the slot in the wrong direction may break the internal pin
and damage the  card slot.  Refer to the CompactFlash cards oper-
ating instructions for the proper direction of insertion.
CompactFlash Card Type
The PC Card Access slot accepts CompactFlash only. 
						

							EÐ27
Installing the PC Card Viewer Software
Before Installing
Perform the following before installing the PC Card Viewer software:
¥ If Windows95 is already started, exit all applications.  Installa-
tion may not be performed properly if any applications are run-
ning.
Installation
Install the viewer software as described below.
To quit installation before it is completed, press the Cancel button
then follow the instructions in the dialog box.
1. Start up Windows95.
2. Insert the CD-ROM into the CD-ROM drive.
The auto CD play function automatically starts the CD-ROMs
program and the contents screen appears.
Starting Up the PC Card Viewer Software on your PC
(PC Card Viewer Utility 1.0)
Use the PC Card Viewer Utility 1.0 for creating viewer slides.
To start the PC Card Viewer software:
* Select [Start]-[Programs]-[NEC PROJECTOR TOOLS]-[PC
Card Viewer Utility 1.0].
Contents of the English version PC Card Viewer software
(PC Card Viewer Utility 1.0)
This is the software used for creating PC Card Viewer slides.  In
this manual it is referred to as the PC Card Viewer software.
PC CARD VIEWER PPT CONVERTER 3.0
This is an application that converts files created with Microsoft
PowerPoint 95 or 97 into indexes so that they can be played di-
rectly with the PC Card Viewer Utility 1.0.
PC Card Viewer PPT Converter is installed automatically when
you install the PC Card Viewer Utility.
To start PC Card Viewer PPT Converter:
* Select PC Card Viewer PPT Converter from NEC PROJECTOR
TOOLS.
Basic Operation of the PC Card Viewer Software
PC Card Viewer Utility is an application for editing documents, con-
verting them into slides and storing them on CompactFlash cards as
playback data (indexes) for presentations using projectors.
Refer to online help for instructions on using the PC Card Viewer
software.
 * The auto CD play function operates if the Auto insert notifica-
tion box in the computers CD-ROM control panel is checked.
(The box is checked by default.)
3. Click [Installing the PC Card Viewer Utility 1.0]
The setup dialog appears.
* Follow the instructions in the setup dialog to complete the in-
stallation.
For instructions on uninstalling the PC Card Viewer software, see
page E-31. 
						

							EÐ28
Drag
Prev
Next
Play/Stop
Jump
Select
DeleteView
A tool bar will appear when you press the MENU button on the re-
mote control or the projector cabinet or clicking with the right button
of a mouse.
Operating the PC Card Viewer Function from
the Projector (playback)
This section describes the operation for showing slides of presenta-
tion documents created using the PC Card Viewer function with the
projector.
It is also possible to make slides directly from the images projected
with the projector.
Projecting slides
1.  Insert a CompactFlash card into the  card slot.
Insert the CompactFlash card with the side with the insertion di-
rection arrow on the top.
 *  Press the eject button to eject the card.
2.  Select the ÒPC Card ViewerÓ from the Source Select menu.
Source Select
RGB
Video
S-Video
PC Card Viewer
3.  Project slides.
Checking ÒShow Folder ListÓ, means that selecting PC Card
Viewer input displays a list of the folders in the CompactFlash
card and if ÒAuto PlayÓ is checked the projector automatically
starts to play slides at the first slide of the folder you have se-
lected.
When selecting ÒShow Folder ListÓ or ÒManual PlayÓ while
the ÒAuto PlayÓ feature is not checked, and you select PC Card
Viewer for the input source,  you can manually advance to the
next slide or the preivious slide. See page E-24 for more details.
The tool bar includes the following buttons:Drag: Drags to move the tool bar. This is available for USB
mouse operation only.
Prev: Returns to the previous slide or folder. Or this lets
you play slides back in reverse.
Next: Advances to the next slide or folder. Or this lets you
play slides back.
Play: Play/Stop: Plays back automatically or manually de-
pending on the setting on PC Card Viewer Options of
the menu. This allows you to stop Auto Play while
you are playing back and to resume playing from the
selected slide or folder when ÒAuto PlayÓ is selected.
This allows you to move on to the next slide when
ÒManual PlayÓ is selected.
Jump: Displays a list of slides while you are playing back.
Select: Displays a list of folders while you are playing back.
Delete: Deletes a captured slide(s) or all the captured slides
in the Capture Ð specific folder.
View: Hides the tool bar while you are playing back. Press-
ing the MENU button or clicking with the right but-
ton of a mouse shows it again.
NOTE:
* The tool bar for PC Card Viewer is not available if you display the
ChalkBoard and the Capture tools, and Main menu using the re-
mote control.
When using a USB mouse you can display the ChalkBoard tool
bar, the Capture tool bar and Main menu as well as the PC Card
Viewer tool bar.
* The tool bar is operated with buttons on the remote control, cabi-
net, and USB mouse.
If no memory card is inserted in the PC CARD ACCESS slot, there is
no signal, and a black, blue or logo background is displayed, de-
pending on the setting.
Playback is stopped when § or © on the remote control or the cabi-
net is pressed in Auto Play mode.
NOTE: Up to 12 indexes can be displayed on the list of folders. The
folder in the right bottom is always a folder exclusively for captured
images, but is only displayed when images have been captured. To
display the list of folders when there are 13 or more indexes stored on
the CompactFlash card, select Edit index from the PC Card Viewer
softwares File menu and move the index you want to display to
within 12 indexes from the top of the folder index. For details on
indexes, refer to the PC Card Viewer softwares help folder. 
						

							EÐ29Auto Play Mode
¥ If the ÒAuto PlayÓ option is selected in ÒPC Card Viewer Op-
tionsÓ of the menu, any given slide will start to play automati-
cally. You can also specify Auto Play Interval between 5 and 300
seconds.
Switching to Slides Directly from Other Input Modes
With this function it is possible to switch directly to a slide when the
picture of a VCR or computer is being projected.
Example:
When conducting presentations using a combination of slides and
moving pictures from a VCR, etc., it is possible to switch from a PC
Card Viewer slide to the video picture then back to the PC Card  Viewer
slide simply by using the Source button.
NOTE: Even if you switch the current PC Card Viewer source to
another source, the current slide is retained. When you return back to
the PC Card Viewer, you will get the slide that has been retained.
SOURCE AUTO ADJ.
COMPUTER PROJECTOR
POWER
PJ
SA
OFF ON
SELECT
SOURCEAUTO
ADJ.
MENU
NOTE: The CompactFlash card editing operation cannot be per-
formed from the projector.  Do so using the PC Card Viewer soft-
ware.
FolderFolder Folder Folder
Folder
Multi cursor (blue marks)
Folder
SlideSlide Slide Slide
Slide
SlideSlideSlide
Slide(Table) cursor (yellow marks)
Slide
When the tool bar is not displayed, use the § or © button to advance
to the next  folder or return to the previous folder.
When the tool bar is not displayed, use the § or © button to advance
to the next slide or return to the previous slide.
When the tool bar is not displayed: 
						

							EÐ30
Capturing Images Displayed on the Projector
Storing images displayed on the projector on the
CompactFlash card
Preparations:
Insert the CompactFlash card into the card slot.
Insert the CompactFlash card with the side with the insertion
direction arrow on the top.
* Press the eject button to eject the card.
1. Project the image you wish to store on the projector.
2. Select the ÒCaptureÓ from the Tools menu.
NOTE:
¥ File size of the captured image varies depending on the resolution
of an input signal.
¥ Since an image data is compressed with the JPEG format, the im-
age is slightly degraded.
NOTE: An hourglass indicating that an image is being captured ap-
pears on the projectors display.  Do not eject the CompactFlash card
or turn off the projectors power while this icon is displayed.  Doing
so will damage the CompactFlash card data.
If the CompactFlash card data is damaged, use a computer to repair
the data.
NOTE: The folder in the right bottom is always a folder exclusively
for captured images.  To display the list of folders when there are 13
or more indexes stored on the CompactFlash card, select Edit in-
dex from the PC Card Viewer softwares File menu and move the
index you want to display to within 12 indexes from the top of the
folder index.  For details on indexes, refer to the PC Card Viewer
softwares help file.
CaptureExit
Freeze
Drag
3. A tool bar will appear.
The tool bar includes the following buttons:
Drag: Drags to move the tool bar (for USB mouse operation
only).
Capture:Captures an image and save it as a JPEG file in a
CompactFlash card.
Freeze: Freezes and unfreezes images.
Exit: Exits the Capture function. Another option to exit the
Capture function is to press MENU or CANCEL but-
ton on the remote control or projector cabinet.
* The tool bar for Capture is not available if you display the
ChalkBoard and the PC Card Viewer tools, and Main menu using
the remote control.
When using a USB mouse you can display the ChalkBoard and
the PC Card Viewer tools, and Main menu as well as the Capture
tool bar.
NOTE: You can compress a captured file (JPEG) using the Cap-
ture Options in the Setup dialog. See page E-24.
NOTE: Captured images with higher resolution than the
projectors native resolution cannot be displayed correctly.
Tools
Capture
PC Card Files
ChalkBoard