NEC Lt380 Portable Projector Users Manual

61
5. Using the Viewer

 Changing Background Logo
You can change the default background logo using the Viewer feature.
NOTE: File size must be 256KB or less. File formats other than JPEG, BMP, non-interlaced GIF or non-interlaced PNG are not
available.
Preparation: Store JPEG or BMP files (JPEG, BMP, non-interlaced GIF or non-interlaced PNG files) in a PC card or
USB memory inserted into your PC and insert the PC card into the projectors slot or USB memory into the projectors
USB port.
1. Press the...

62

 Using the Menus
1. Press the MENU button on the remote control or the projector cabinet to display the menu.
NOTE: The commands such as , ENTER, EXIT in the gray bar show available buttons for your operation.
2. Press the SELECT 
 buttons on the remote control or the projector cabinet to display the submenu.
3. Press the ENTER button on the remote control or the projector cabinet to highlight the top item or the first
tab.
4. Use the SELECT 

 buttons on the remote control or the projector...

63
 Menu tree
Menu Item
Source Computer 1, Computer 2, Computer 3 (LT380 only), Component, Video, S-Video, Viewer, LAN, Entry List
Adjust Picture Preset 1 to 6
Detail Settings Reference High-Bright, Presentation, Video, Movie,
Graphic, sRGB
Gamma CorrectionDynamic, Natural, Black Detail
Color Temperature5000, 6500, 7800, 8500, 9300, 10500
White Balance Brightness RGB, Contrast RGB
Color Correction Red, Green, Blue,Yellow, Magenta,
Cyan
Brightness
Contrast Manual, Auto
Sharpness
Color
Hue
Reset
Image...

64
6. Using On-Screen Menu
Menu Item
Setup Installation Orientation Desktop Front, Ceiling Rear, Desktop Rear, Ceiling Front
Screen Screen Type: 4:3, 16:9 / Position
LAN Mode Built-in
PC Card Advanced: Network Type, WEP
Domain
Mail
Projector Name
Communication Speed 4800, 9600, 19200, 38400
Standby Mode Normal, Power-Saving
Options Auto Adjust Off, Normal, Fine
Auto Start Off, On
Power Management Off, 0:05, 0:10, 0:20, 0:30
Fan Mode Auto, High
Default Source Select Last, Auto, Select (Computer1,...

65
 Menu Elements
Slide bar
Solid triangle
Highlight
Ta b
Radio button
Check box
Cancel button
OK button
Menu windows or dialog boxes typically have the following elements:
Highlight ................ Indicates the selected menu or item.
Solid triangle ......... Indicates further choices are available. A highlighted triangle indicates the item is active.
Tab........................ Indicates a group of features in a dialog box. Selecting on any tab brings its page to the front.
Radio button ......... Use...

66
6. Using On-Screen Menu
 Menu Descriptions & Functions [Source]
Computer 1 and 2
Selects the computer connected to your COMPUTER 1 or COMPUTER 2 input connector signal.
NOTE: An optional component cable (Component V or ADP-CV1 cable) is needed for a component signal.
Computer 3 (LT380 only)
Selects the computer connected to your COMPUTER 3 (DVI-D) connector.
Component
Selects what is connected to your COMPONENT IN (Y, Cb/Pb, Cr/Pr).
Video
Selects what is connected to your VIDEO input-VCR, laser disc...

67
6. Using On-Screen Menu
[Entry List]
Use the SELECT 
 buttons on your remote control or the projector cabinet to select the signal and press the
ENTER button on the remote control or the projector cabinet to display the [Entry Edit Command] screen.
Entering the Currently Projected Signal into the Entry List
1. Display the Entry List.
2. Use the SELECT 

 or  button on your remote control or the projector cabinet to select any number and
press the ENTER button on the remote control or the projector...

68
6. Using On-Screen Menu
[Entry Edit Command]
You can edit signals on the [Entry List].
Load ...................... Enables you to select a signal from the list.
Store ..................... Enables you to store the currently projected signal.
Cut ........................ Enables you to remove a selected signal from the list and place it on the clipboard in the projector.
Copy ...................... Enables you to copy a selected signal from the list and place it on the clipboard in the projector.
Paste...

69
6. Using On-Screen Menu
 Menu Descriptions & Functions [Adjust]
[Picture]
[Preset]
This option allows you to adjust neutral tint for yellow, cyan or magenta. There are six factory presets optimized for
various types of images, you can set user adjustable settings. 

70
6. Using On-Screen Menu
[Detail Settings]
This will provide you with three pages of menus that provide more detailed settings.
[General]
Selecting Reference Setting [Reference]
This feature allows you to use color correction or gamma values as reference data to optimize for various types of
images. You can select one of the following six settings.
High-Bright ........ Recommended for the use in a brightly lit room.
Presentation ...... Recommended for making a presentation using a PowerPoint file....