NEC Lt245 Portable Projector Users Manual
Have a look at the manual NEC Lt245 Portable Projector Users Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 66
59
Operations on the projector – Connecting to the computer
1. Make the LAN settings on the projector.
Make the LAN settings at [Setup]
→ [Installation] → [LAN Mode] in the menu. (See page 99)
2. Connect a commercially available USB mouse to the projector. (See page 41)
3. Click anywhere on the screen with the USB mouse.
The menu appears.
4. Click “Source”, then click “LAN”.
The help message is displayed.
The message is displayed only when a password for Desktop Control Utility 1.0 is not assigned.
5....](http://img.usermanuals.tech/thumb/54/92007/w64_nec-lt245-manual_d-65.png "Page 66
59
Operations on the projector – Connecting to the computer
1. Make the LAN settings on the projector.
Make the LAN settings at [Setup]
→ [Installation] → [LAN Mode] in the menu. (See page 99)
2. Connect a commercially available USB mouse to the projector. (See page 41)
3. Click anywhere on the screen with the USB mouse.
The menu appears.
4. Click “Source”, then click “LAN”.
The help message is displayed.
The message is displayed only when a password for Desktop Control Utility 1.0 is not assigned.
5....")
![Page 67
60
9.Input the password you made a note of in the previous Step [6] in “Operations on the Computer”.
10. Input the password and click “OK”.
The password input window is turned off.
11. Click the PC search icon
.
The PC search window appears.
12. Click “OK”.
The connection selection window appears.
•To search by inputting the IP address of the connected computer, click
on the PC Search window, click
“Input IP Address”, then click “OK”.
13. Click the computer to which you want to connect, then click...](http://img.usermanuals.tech/thumb/54/92007/w64_nec-lt245-manual_d-66.png "Page 67
60
9.Input the password you made a note of in the previous Step [6] in “Operations on the Computer”.
10. Input the password and click “OK”.
The password input window is turned off.
11. Click the PC search icon
.
The PC search window appears.
12. Click “OK”.
The connection selection window appears.
•To search by inputting the IP address of the connected computer, click
on the PC Search window, click
“Input IP Address”, then click “OK”.
13. Click the computer to which you want to connect, then click...")
64 5. Using the Viewer Operating the Viewer Function from the Projector (playback) This section describes the operation for showing slides created using the Viewer function with the projector. It is also possible to make slides directly from the images projected with the projector. Projecting slides (Viewer) Preparation: Use the Capture feature to store graphic files (JPEG, BMP, non-interlaced GIF or non-interlaced PNG files) in a PC card or USB memory inserted into the projector’s slot. Or store JPEG or BMP files in a PC card or USB memory inserted into your PC. 1. Insert a PC card into the PC card slot or USB memory into the USB port of the projector. 2. Press the VIEWER button on the remote control or select the “Viewer” from the source list. An image stored in the PC card or USB memory will be displayed. 3. Press the MENU button to display the Viewer menu. The Viewer menu will appear when you press the MENU button on the remote control or the projector cabinet. The Viewer menu includes the following commands: Play ................... Plays back automatically or manually depending on the setting in Options. This allows you to move on to the next slide when Manual Play is selected in the “Play Mode”. Stop ................... This allows you to stop Auto Play while you are playing back and to resume playing from the selected slide or folder when Auto Play is selected in the “Play Mode”. Thumbnails ........ Displays a list of thumbnails of Graphic files stored in the PC card inserted into the projector. Delete ................ Deletes a captured slide(s) or all the captured slides in the Capture - specific folder. Logo .................. Replace the default background logo with another logo in JPEG, BMP, non-interlaced GIF or non-interlaced PNG format. Options .............. Displays the Viewer setting options. 4. Select “Play” and then press the ENTER button to display the first slide or to start playing slides auto- matically.
65 5. Using the Viewer 0000.jpg0001.jpg0002.jpg 3 Fichiers Slot 1 _CAP_ _RESTORE RECYCLED 1/3 0000.jpg 60KBsélection : ENTER ? Highlight .................................. Indicates the selected folder or drive. List of folders .......................... Indicates folders contained on a PC card or USB memory. Information .............................. Indicates information of the selected file or folder. Folder: folder name, creation date (month/day/year), creation time (hour/minute). File: slide number/number of displayable slides in a folder, file name, creation date (month/day/ year), creation time (hour/minute), file size. Number of files ........................ Indicates number of displayable slides in the selected folder. The maximum number of images recognized as slides within one directory is about 1000. Thumbnail/file name ................ Indicates thumbnails and names contained in a folder. Cursor ..................................... Indicates the selected slide. Scroll bar ................................. Used to view folders or files not visible in the window. Viewer Window Elements Highlight List of folders InformationNumber of filesThumbnail/file name Scroll bar Cursor (orange)
66 5. Using the Viewer Setting Option for Viewer Play Mode: Manual .................. Views a slide manually when the Viewer source is selected. Auto ...................... Plays back slides automatically when the Viewer source is selected. Interval: Specifies interval time between 5 and 300 seconds. Start: Specifies start screen when the Viewer source is selected. Show Thumbnails: Selecting the Viewer source will display a list of thumbnails of graphic files stored in the PC card or USB memory when “On” is selected. 0000.jpg0001.bmp0002.jpg 3 Fichiers Slot 1 _CAP_ _RESTORE RECYCLED 1/3 0000.jpg 60KBsélection : ENTERdossier : EXIT ? 0000.jpg0001.jpg0002.jpg 3 Fichiers Slot 1 _CAP_ _RESTORE RECYCLED 1/3 0000.jpg 60KBsélection : ENTER ? dossier : EXIT “Off”“On” Sort: Rearranges the slides or thumbnails by name, extension, date or size. NOTE: This setting is not available for the following folders: *The __CAP__ folder for captured images *Folders created with the Output Viewer feature of Ulead Photo Explorer 8.0 or with Viewer PPT Converter 3.0 OK/Cancel: To close the Options menu with saving changes, select OK and press the ENTER button. To close the Options menu without saving changes, select Cancel and press the ENTER button.
67 Exiting Viewer To exit Viewer, switch to another input such as Computer 1, Computer 2, Video, S-Video or LAN. *To switch to another input, there are two ways: *Press the COMPUTER 1, COMPUTER 2, VIDEO, S-VIDEO or LAN button on the remote control. *Press the MENU button on the remote control to display the Viewer menu. Press the MENU button again to display the main menu and select the input from the Source submenu. With this function it is possible to switch directly to a slide when the picture of a VCR or computer is being projected. Example: When conducting presentations using a combination of slides and moving pictures from a VCR, etc., it is possible to switch from a Viewer slide to the video picture then back to the Viewer slide simply by using the Viewer button. NOTE: Even if you switch the current Viewer source to another source, the current slide is retained. When you return back to the Viewer, you will get the slide that has been retained. Viewing Digital Images Digital images can be played with the Viewer if the following conditions are met: •If the image can be stored on an MS-DOS format PC card. •If the image can be stored in a format supported by the Viewer. With the Viewer, images on the card are searched for in directories and images in JPEG, BMP, non-interlaced GIF or non-interlaced PNG format are recognized as slides. NOTE: The maximum number of images recognized as slides within one directory is about 1000. 5. Using the Viewer
68 5. Using the Viewer Deleting Captured Images Using the Delete command on the Viewer menu allows you to delete captured images. To delete captured images: Preparation: Make sure that the PC card is inserted into the PC card slot or USB memory into the USB port of the projector. 1. Press the VIEWER button on the remote control to display an image. 2. Press the MENU button to display the Viewer menu. 0000.jpg0001.jpg0002.jpg 3 Fichiers Slot 1 _CAP_ _RESTORE RECYCLED 1/3 0000.jpg 60KBsélection : ENTER ? dossier : EXIT 3. Use the button to select “Thumbnails” and then press the ENTER button. The Thumbnail screen will be displayed. NOTE: To change highlight from the Thumbnails screen (pane on the right) to a directory tree (pane on the left) , press the EXIT button. To return highlight to the Thumbnails screen, press the ENTER button. 4. Use the buttons to select an image you wish to delete. 5. Press the MENU button to display the Viewer menu. 6. Use the button to select “Delete” and then press the ENTER button. A confirmation message will be displayed. 7. Use the button to select “Yes” and then press the ENTER button. This completes deleting.
69 5. Using the Viewer To delete all the captured images: 1. Repeat steps 1 to 3 in the above described procedure. 2. Press the EXIT button to select the “__CAP__” folder in the directory (pane on the left). 0000.jpg0001.jpg0002.jpg 3 Fichiers Slot 1 __CAP__ _RESTORE RECYCLED 1/3 0000.jpg 60KBsélection : ENTERdossier : EXIT ? 3. Press the MENU button to display the Viewer menu. 4. Use the button to select “Delete” and then press the ENTER button. 5. Use the button to select “Yes” and then press the ENTER button. This completes deleting. NOTE: The vacant __CAP__ folder stays even after you delete all the captured images. A confirmation message will be displayed.
70 5. Using the Viewer Changing Background Logo You can change the default background logo using the Viewer feature. NOTE: File size must be 256KB or less. File formats other than JPEG, BMP, non-interlaced GIF or non-interlaced PNG are not available. Preparation: Use the Capture feature to store JPEG or BMP files in a PC card inserted into the projector’s slot or USB memory into projector’s USB port. Or store JPEG, BMP, non-interlaced GIF or non-interlaced PNG files in a PC card or USB memory inserted into your PC’s slot or USB port and insert the PC card into the projector’s slot or USB memory into the projector’s USB port. 1. Press the VIEWER button on the remote control to display an image. 2. Press the MENU button to display the Viewer menu. 0000.jpg0001.jpg0002.jpg 3 Fichiers Slot 1 _CAP_ _RESTORE RECYCLED 1/3 0000.jpg 60KBsélection : ENTER ? dossier : EXIT 3. Use the button to select “Thumbnails” and then press the ENTER button. The Thumbnail screen will be displayed. NOTE: To change highlight from the Thumbnails screen (right window) to a directory tree (left window) , press the EXIT button. To return highlight to the Thumbnails screen, press the ENTER button. 4. Use button to select a file (slide) for your background logo. 5. Press the MENU button to display the Viewer menu. 6. Use the button to select Logo and then press the ENTER button. A confirmation dialog box will be displayed. 7. Use the button to select “Yes” and press the ENTER button. This completes changing a logo for the background. *Once you have changed the background from the NEC logo to another, you cannot return the logo to back- ground even by using “Reset”. To put the NEC logo back in the background logo, repeat the above steps. The NEC logo file is included on the supplied User Supportware 2 CD-ROM (/Logo/nec_b_x.jpg).
71 6 Using On-Screen Menu ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ Using the Menus ........................................................ 72 Menu tree .................................................................. 73 Menu Elements .......................................................... 75 Menu Descriptions & Functions [Source] .................. 76 Menu Descriptions & Functions [Adjust] .................... 79 Menu Descriptions & Functions [Setup] .................... 90 Menu Descriptions & Functions [Information] .......... 112 Menu Descriptions & Functions [Reset] .................. 116
72 Using the Menus 1. Press the MENU button on the remote control or the projector cabinet to display the menu. NOTE: The commands such as , ENTER, EXIT in the gray bar show available buttons for your operation. 2. Press the SELECT buttons on the remote control the projector cabinet to display the submenu. 3. Press the ENTER button on the remote control or the projector cabinet to highlight the top item or the first tab. 4. Use the SELECT buttons on the remote control or the projector cabinet to select the item you want to adjust or set. You can use the SELECT buttons on the remote control or the projector cabinet to select the tab you want. NOTE: You can select a tab only when the tab color is orange. 5. Press the ENTER button on the remote control or the projector cabinet to display the submenu window. 6. Adjust the level or turn the selected item on or off by using the SELECT buttons on the remote control or the projector cabinet. Changes are stored until you adjust it again. 7.Repeat steps 2 -6 to adjust an additional item, or press the EXIT button on the remote control or the projector cabinet to quit the menu display. NOTE: When a menu or message is displayed, several lines of information may be lost, depending on the signal or settings. Main menu Submenu window Currently available buttons Submenu 6. Using On-Screen Menu
73 Menu tree Menu Item Source Computer1, Computer2, Video, S-Video, Viewer, LAN, Entry List Adjust Basic Brightness Contrast Color Hue Sharpness Wall Color Off, Blackboard, Light yellow, Light green, Light blue, Sky blue, Light rose, Pink Aspect Ratio 4:3 4:3, Letterbox, Wide Screen, Crop 16:9 4:3 Window, Letterbox, Wide Screen, 4:3 Fill Volume Reset Picture Preset 1 to 5 Management Detail Settings Reference Presentation, Video, Movie, Graphic, sRGB Gamma CorrectionDynamic, Natural, Black Detail Color Temperature5000, 6500, 7200, 7800, 8500, 9300 White Peaking Black Expansion On, Off White Balance Brightness RGB, Contrast RGB Color Correction Red, Green, Blue,Yellow, Magenta, Cyan, Color Gain Signal Type RGB, Component Video Filter Off, Less, More Image Options Clock Phase Horizontal Position Vertical Position Blanking Top, Bottom, Left, Right Resolution Auto, Native Overscan 0%, 5%, 10% Video Noise Reduction Off, Low, Medium, High Color Matrix HDTV, SDTV 3D Y/C Separation Off, On Vertical Enhancer Off, 1, 2, 3 I/P Converter Deinterlace(Auto/Still), Interlace Setup Basic Keystone Auto, Manual Cornerstone Lamp mode Normal, Eco Menu Mode Basic Menu, Advanced Menu Language English, Deutsch, Français, Italiano, Español, Svenska, Suomi, Norsk, Nederlands, Türkçe, Polski, , , Magyar, Português, Cestina, , Dansk, , , Menu Menu Color Select Color1 to 5, Monochrome Display Select Source: On, Off / Message: On, Off Menu Display Time Manual, Auto 5 sec, Auto 15 sec, Auto 45 sec Background Blue, Black, Logo Security Cabinet Button Unlock, Lock Password (Menu) Entry, Delete Password (Logo) Entry, Delete Security Enable, Disable, Keyword, Use Protect Key, Drive, Read, Register, Delete 6. Using On-Screen Menu Basic menu items are indicated by shaded area.