NEC Lt220 Portable Projector Users Manual
Have a look at the manual NEC Lt220 Portable Projector Users Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
E-11 INTRODUCTION Part Names of the Projector Terminal Panel Features 10 11 3 5 4 2 1 6 7 891213 Terminal Panel Features 1. RGB IN 1 / Component Input Connector (Mini D-Sub 15 Pin) Connect your computer or other analog RGB equipment such as IBM compatible or Macintosh computers. Use the supplied RGB cable to connect to your computer. This also serves as a component input con- nector that allows you to connect a component video output of compo- nent equipment such as a DVD player. This connector also supports SCART output signal. See page E-29 for more details. 2. RGB IN 2 / Component Input Connector (Mini D-Sub 15 Pin) This connector has the same function as the RGB IN 1 connector. NOTE: The RGB IN 2 does not support SCART output signal and Plug & Play. 3. RGB AUDIO IN Mini Jack (Stereo Mini) This is where you connect audio output from your computer or DVD player. A commercially available audio cable is required. 4. RGB OUT Connector (Mini D-Sub 15 Pin) You can use this connector to loop your computer image to an external monitor from the RGB 1 or 2 input source. The RGB analog signal set on RGBOUT Terminal is output during idle mode. See pages E-32 and 100.
E-12 INTRODUCTION Part Names of the Projector Terminal Panel Features 5. AUDIO OUT Mini Jack (Stereo Mini) Connect an additional audio equipment here to listen to audio coming from your computer, Video or S- Video input. Note that there is no audio output from this jack during Standby and Idle. 6 S-VIDEO IN Connector (Mini DIN 4 Pin) Here is where you connect the S-Video input from an external source like a VCR. NOTE: S-Video provides more vivid color and higher resolution than the tra- ditional composite video format. 7. VIDEO IN Connector (RCA) Connect a VCR, DVD player, laser disc player, or document camera here to project video. 8. VIDEO AUDIO IN Jacks (RCA) L : This is your left channel audio input for stereo sound coming from the VIDEO source. R : This is your right channel audio input for stereo sound from the VIDEO source. 9. PC CONTROL Port (Mini DIN 8 Pin) Use this port to connect your PC to control your projector via a serial cable. This enables you to use your PC and serial communication pro- tocol to control the projector. The NEC optional serial cable (CA03D) is required to use this port. You can also control the projector by using Dynamic Image Utility 2.0 included on the supplied CD-ROM. To do so you must first have Dynamic Image Utility 2.0 installed on your PC. If you are writing your own program, typical PC control codes are on page E-133. A cap is put on the port at the factory. Remove the cap when using the port.
E-13 10. USB Port (Type A) Connect a commercially available mouse that supports USB. You can operate the menu or Viewer with the USB mouse via this port. Note that this port should not be connected to a computer and that there may be some brands of USB mouse that the projector does not support. 11. USB Port (Type B) Connect this port to the USB port (type A) of your PC using the sup- plied USB cable. You can operate your computers mouse functions from the remote control. 12. PC CARD Eject Button Press to eject a PC card partially. 13. PC CARD Slot Insert a PC card, commercially available LAN card or NEC optional wireless LAN card here. INTRODUCTION Part Names of the Projector Terminal Panel Features
E-14 Part Names of the Remote Control MENU PJ ASPECT OFF VIDEO AUTO ADJ. S-VIDEO RGB1 RGB2 LASERON 3D REFORM HELPPOINTER VOLUME MAGNIFY PICTURE PIC-MUTEVIEWER SLIDE FOLDER SLIDE LIST ENTERCANCEL POWER SELECT FREEZE 16 21 19 26 27 28 29 17 20 22 24 25 2315 14 1211 109 68 74 53 18 13 INTRODUCTION Part Names of the Remote Control PJASPECTFREEZE3D R E F O R MPOINTERNIFYVIEWERS L I D E OFF VIDEO AUTO ADJ.S-VIDEO RGB1 RGB2 LASER ONPOWER SELECT 21 NOTE: If you are using a Macintosh com- puter, you can click either the right-click or left-click button to activate the mouse. 1. Infrared Transmitter Direct the remote control toward the remote sensor on the projector cabinet. 2. LASER Pointer Beams a laser light when the LA- SER button is pressed. 3. LED Flashes when any button is pressed. 4. POWER ON Button If the main power is applied, you can use this button to turn your pro- jector on. NOTE: To turn on the projector, press and hold the POWER ON button for a minimum of two seconds. 5. POWER OFF Button You can use this button to turn your projector off. NOTE: To turn off the projector, press and hold the POWER OFF button for a minimum of two seconds.
E-15 INTRODUCTION Part Names of the Remote Control 6. VIDEO Button Press this button to select an NTSC, PAL, PAL-N, PAL-M, PAL60, SECAM or NTSC4.43 compatible video source from a VCR, DVD player, or laser disc player. 7. S-VIDEO Button Press this button to select an S-Video source from a VCR. 8. RGB 1 Button Press this button to select a video source from computer or component equipment connected to your RGB IN 1 port. 9. RGB 2 Button Press this button to select a video source from computer or component equipment connected to your RGB IN 2 port. 10. AUTO ADJ Button Use this button to adjust an RGB source for an optimal picture. Some signals may not be displayed correctly or take time to be displayed. See page E-48. 11. LASER Button Press and hold this button to activate the laser pointer. When lit, you can use the laser to draw your audiences attention to a red dot that you can place on any object. 12. MENU Button Displays the menu for various settings and adjustments.
E-16 INTRODUCTION Part Names of the Remote Control 13. SELECT (Mouse) Button When you are in the Computer mode, these buttons work as a com- puter mouse. When you are in the Projector mode, which is indicated by lighting the PJ button. See page E-53. :Use these buttons to select the menu of the item you wish to adjust. :Use these buttons to change the level of a selected menu item. A press of the button executes the selection. When the pointer is displayed, these buttons move the pointer. When the pointer is not displayed, these buttons are for adjust- ing the image. 14. ENTER (Left Click) Button When you are in the Computer mode, this button works as the mouse left button. When this button is pressed and held for a minimum of 2 seconds, the drag mode is set. When you are in the Projector mode, which is indicated by lighting the PJ button: Use this button to enter your menu selection. It works the same way as the ENTER button on the cabinet. See page E-9. 15. CANCEL (Right Click) Button When you are in the Computer mode, this button works as the mouse right button. When you are in the Projector mode, which is indicated by lighting the PJ button: Press this button to exit the Menus. It works the same way as the CANCEL button on the cabinet. 16. PJ Button Press this button to switch the SELECT, CANCEL, and ENTER but- tons between the Projector mode (lit red) and the Computer mode. Press this button or any one of the POWER ON/OFF, MENU, ASPECT, 3D REFORM, HELP, POINTER, MAGNIFY, PICTURE, VIEWER, FOLDER LIST or SLIDE LIST buttons to switch to the Projector mode and the PJ button lights red. To switch back to the Computer mode, press the PJ button again. See page E-53.
E-17 INTRODUCTION Part Names of the Remote Control 17. ASPECT Button Press this button to display the Aspect Ratio select screen. See page E-86. 18. FREEZE Button This button will freeze a picture. Press again to resume motion. 19. 3D REFORM Button Press this button to enter 3D Reform to correct the keystone (trapezoi- dal) distortion, and make the image square. See page E-45. 20. HELP Button Provides the online help or the set information. 21. POINTER Button Press this button to display one of the eight pointers; press again to hide the pointer. You can move your pointer icon to the area you want on the screen using the Select button. See page E-55. 22. VOLUME (+) (–) Button Press (+) to increase the volume and (–) to decrease it. 23. MAGNIFY (+) (–) Button Use this button to adjust the image size up to 400%. When the pointer is displayed, the image is magnified about the center of the pointer. When the pointer is not displayed, the image is magnified about the center of the screen. When the image is magnified, the pointer is changed to the magnifying icon. See page E-56. 24. PICTURE Button Press this button to display the Picture adjustement screen such as Brightness, Contrast, Color, Hue, and Sharpness. See page E-85.
E-18 25. PICTURE MUTE Button This button turns off the image and sound for a short period of time. Press again to restore the image and sound. NOTE: When the menu is displayed, a press of this button mutes an image and sound without turning off the menu. 26. VIEWER Button Press this button to select the Viewer source. 27. SLIDE (+) (–) Button Press (+) to select the next folder or slide and (–) to select the previous folder or slide. See page E-67. 28. FOLDER LIST Button Press this button to select Viewer source to display a list of folders included in a PC card. See page E-67. 29. SLIDE LIST Button Press this button to select Viewer source to display a list of slides in- cluded in a PC card. See page E-67. NOTE: The default is the Computer mode, which allows you to use the SE- LECT, CANCEL, and ENTER buttons as your computer mouse. When the POWER ON/OFF, MENU, ASPECT, 3D REFORM, HELP, POINTER, MAG- NIFY, PICTURE, VIEWER, FOLDER LIST, or SLIDE LIST button is pressed, the PJ button lights red to indicate that you are in the Projector mode. If no buttons are pressed within 60 seconds, the light goes out and the Projector mode is canceled. INTRODUCTION Part Names of the Remote Control
E-19 Battery Installation 1. Press firmly and slide the battery cover off. 2. Remove both old batteries and install new ones (AA). Ensure that you have the batteries polarity (+/-) aligned correctly. 3. Slip the cover back over the batteries until it snaps into place. Do not mix different types of batteries or new and old batteries. Note on Remote Control Operation: If you press and hold the SELECT button while installing new batteries, the remote control may fail to work properly. Should this happen, remove the batteries and then install them again with- out touching the SELECT button. INTRODUCTION Part Names of the Remote Control
E-20 Remote Control Precautions •Handle the remote control carefully. •If the remote control gets wet, wipe it dry immediately. •Avoid excessive heat and humidity. •If you will not be using the remote control for a long time, remove the batteries. •Do not place the batteries upside down. •Do not use new and old batteries together, or use different types of batteries together INTRODUCTION Part Names of the Remote Control 30˚ 30˚30˚ 30˚ Operating Range 7m/22 feet 7m/22 feet Remote control Remote sensor on the projector cabinet •The infrared signal operates by line-of-sight up to a distance of about 22 feet/7 m and within a 60-degree angle of the remote sensor on the projector cabinet. •The projector will not respond if there are objects between the re- mote control and the sensor, or if strong light falls on the sensor. Weak batteries will also prevent the remote control from properly operating the projector.