Home > NEC > Projector > NEC Lt100 Projector Users Manual

NEC Lt100 Projector Users Manual

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual NEC Lt100 Projector Users Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 52
    Add page 51 to Favourites
    image text
    Enable zoom 
    							Command Codes (continued)
No. Function Code Data Description
99
SPECIFICATIONS100 32
Display Mode Select1FH Yes 0 Normal Aspect
1 Wide Aspect
33
Power Management On15H No
34
Power Management Off16H No
35 Digital Zoom W 89H No Same as remote
36 Digital Zoom T 8AH No Same as remote
37 Brightness 60H Yes 0 (00H) ÐÐ 63 (3FH)
38 Contrast 62H Yes 0 (00H) ÐÐ 63 (3FH)
39 Color 64H Yes 0 (00H) ÐÐ 63 (3FH)
40 Tint 66H Yes -32 (E0H) ÐÐ 31 (1FH)
41 Sharpness 68H Yes 0 (00H) ÐÐ 63 (3FH)
42 Audio Volume 6AH Yes 0 (00H) ÐÐ 63 (3FH)
43 Picture Adj 70H Yes -32 (
FFE0H) ÐÐ 31 (001FH)
44 Fine Picture 6EH Yes 0 (00H) ÐÐ 127 (7FH)
45 H Position 72H Yes -128 (80H) ÐÐ 127 (7FH)
46 V Position 74H Yes -64 (C0H) ÐÐ 63 (3FH)
47 Lamp Reset 3FH No
48 Lamguage Select 3DH Yes 0 English
1 German
2 French
3 Italian
4 Spanish
5 Swedish
6 Japanese
WHITE BALANCE
49 Sub Brightness R 75H Yes 0 (00H) ÐÐ 63 (3FH)
50 Sub Brightness G 76H Yes 0 (00H) ÐÐ 63 (3FH)
51 Sub Brightness B 77H Yes 0 (00H) ÐÐ 63 (3FH)
52 Sub Contrast R 78H Yes 0 (00H) ÐÐ 63 (3FH)
53 Sub Contrast G 79H Yes 0 (00H) ÐÐ 63 (3FH)
54 Sub Contrast B 7AH Yes 0 (00H) ÐÐ 63 (3FH)
    Add page 52 to Favourites
    image text
    Enable zoom 
    							Cable Connection
Communication Protocol
Baud rate: 9600 bps
Data length: 8 bits
Parity: No parity
Stop bit: One bit
X on/off: None
CommunicationsFull duplex
procedure:
If the CPU of the projector has received the data correctly, it returns an ACK(C5H). If the received data is not correct, the CPU returns a
NAK(CAH), then the following status:
Receiving success: C5
Receiving failure: CA Err
Err 01: Command Error (command not supported)
Err 02: Checksum Error
Err 03: Busy (command not acceptable)
101
44 Err 04: Parameter Error ( parameter data abnormal)
1 2 54 36
7 8
To RxD of PC©PC Control Connector (DIN-8P)
NOTE:  If failing in powering-on, the CPU returns the following NAKs:
CA Err 1
Err 1 8X (Apply the corresponding bit.)
Bit 0: Lamp housing is not attached correctly
Bit 1: Fan stoppage
Bit 2: Overheated
Bit 3: Lamp lighting failure
To TxD of PC§To GND of PC©
SPECIFICATIONS102
    All NEC manuals Comments (0)

    Related Manuals for NEC Lt100 Projector Users Manual