NEC L102w Projector Users Manual

4English ...
Introduction
Product Features
 
This product is a WXGA single chip 0.45” DLP® projector. 
Features you’ll enjoy:
■  Light and small LED projector
    The projector uses LED as a light source instead of lamp.
■  Display popular wide screen
    High resolution display - 1,039,680 pixels (16:10 WXGA equivalent)
■  Quick start (4 seconds),  Quick Power Off (1 second), Direct Power Off
4 seconds after turning on the power, the projector is ready to display PC or video images.
The projector can be...

5... English
Introduction
Power Cord x1Computer Cable (VGA)(P/N:79TC5061)
Remote Control(P/N:79TC5091)Battery (CR2025)
Projector
Package Overview
This projector comes with all the items shown below. Check to 
make sure your unit is complete. Contact your dealer immedi-
ately if anything is missing.
	Due to the differ-ence in applications for each country, some regions may have dif-ferent accessories.
Documentation: 
		NEC Projector CD-ROM 
(P/N: 7N952011)
		Quick Setup Guide   (P/N: 7N8N4551) 
...

6English ...
Introduction
Ventilation (intake)1. 
Ventilation (exhaust)2. 
Remote Sensor3. 
Speaker4. 
Lens Cover5. 
Lens6. 
Control Panel7. 
Focus Lever8. 
Projector
Product Overview
1
3
2
1
2
7
8
4
65
Inside pocket for the remote control
Inside pocket for the optional wireless LAN unit  

7... English
Introduction
Connection Ports
SD CARD Slot1. Used for Multimedia.Insert the SD card into this slot with the label facing up. Note:Supported SD card types are:- SD card up to 2 GB-  SDHC card up to 32 GB Does not support SDHC card compatible with SD3.0
(Mini/Micro SD and Mini/Micro SDHC cards require an adapter.)
USB-A Port2. - Connect a commercially available USB device. Used for Multimedia.- Connect the optional wireless LAN unit (NP03LM/NP02LM).  AWIND Inc. applications can be used...

8English ...
Introduction
Control Panel
12
43
1STATUS indi-
cator
Indicate the projector’s tempera-
ture status and Control Panel 
Lock is enabled. Refer to the 
Status Indicator on page 48.
2LIGHT indica-
tor
Indicate the projector’s light 
source (LED) status. Refer to the 
LIGHT Indicator on page 48.
3POWER and 
indicator
Press the “” button to turn 
on the projector. Refer to the 
“Power On/Off the Projector” 
section on pages 14-15.
4SOURCEPress “SOURCE” to select an 
input signal. 

9... English
Introduction
Remote Control
1POWER Refer to the “Power On/Off the 
Projector” section on pages 14-15
2VOL. +/-Increase/decrease speaker vol-
ume.
3COMP.Press “COMP.” to choose COM-
PUTER IN connector.
4VIDEOPress “VIDEO” to choose the 
VIDEO  IN connector.
5HDMIPress “HDMI” to choose the 
HDMI IN connector.
	Before using the remote control for the first time, remove the transparent insulation tape. See page 11 for battery installation.
3VOLTSCR2 025
1
3
4
6
9
11
5
7
8
10
14
12
13
2 

10English ...
Introduction
6SDPress “SD” to choose the SD 
CARD slot. Multimedia will 
start.
7USB-APress “USB-A” to choose the 
USB-A port. Multimedia will 
start. With the optional wire-
less LAN unit connected to the 
USB-A port,  the wireless LAN 
standby screen will be displayed.
8USB-BPress “USB-B” to choose the 
USB-B port. (USB Display)
9AUTO ADJ.Optimizing a computer image 
automatically. 
10D-ZOOMZoom in/out the projected im-
age.
11MENUPress “MENU” to launch the 
Onscreen display (OSD), back...

11... English
Introduction
Battery Installation
Remote Control Precautions
• Handle the remote control carefully.
• If the remote control gets wet, wipe it dry immediately.
• Avoid excessive heat and humidity.
• Do not place the battery upside down.
1. Press firmly and slide the battery cover off.
2.  Remove the old Lithium 
coin cell and install new one 
(CR2025). Ensure that the 
side with a “+” is facing up.
3.  Put the cover back.
	The infrared signal operates by line-of-sight up to a distance of...

12English ...
Installation
m o l ex
MOLEX
E62405SP
R
Connecting the Projector
1.........................................................................\
....................Power cord (supplied)2.........................................................................\
.............................................SD Card3.........................................................................\
......................................HDMI...

13... English
Installation
E62405SP
R
Audio Output
	Due to the differ-ence in applications for each country, some regions may have differ-ent accessories.
Video Output
Connect to Video Sources
DVD Player, Blu-ray Player, Set-top Box, HDTV receiver
1.........................................................................\
....................Power cord (supplied)2.........................................................................\
......................................HDMI...