NEC Gt6000r Lcd Projector Users Manual

2-14
To connect SCART output (RGB)
Before connections: An exclusive SCART adapter (ADP-SC1) and a
commercially available SCART cable are required for this connection.
NOTE:
• Audio signal is not available for this connection.
• The RGB 1 IN connector does not support Plug & Play.
USB A USB B PC CARD
PC CONTROL
IN
IN1 2
OUT
OUT SC TRIGGER REMOTE 2REMOTE 1LAN
AC IN 
AUDIO
AUDIOAUDIO OUTR
R/Cr
G/Y
B/Cb
VH/
  HVRL/MONO
RL/MONORL/MONOL/MONO
SLOT 1 SLOT 2DVI
RGB OUTRGB 1RGB 2VIDEOS-VIDEORGB 2
Video equipment...

2-15
AUDIO OUTL
AUDIO INLR
R
ComponentYCbCr
USB A USB B PC CARD
PC CONTROL
IN
IN OUT
OUT SC TRIGGER REMOTE 2REMOTE 1LAN
AC IN 
AUDIO
AUDIOAUDIO OUT
R
R/Cr
G/Y
B/Cb
V
H/
   HV
RL/MONO
RL/MONORL/MONO L/MONO
SLOT 1 SLOT 2DVI
RGB OUT
RGB 1
RGB 2
VIDEOS-VIDEO
RGB 1
RGB 2
Connecting Your DVD Player
DVD player
You can connect your projector to a DVD player with component output or
Video output. To do so, simply:
1. Turn off the power to your projector and DVD player.
2. If your DVD player has the component...

2-16
AUDIO OUTLRVIDEO OUTS-VIDEO VIDEO
AUDIO INLR
USB A USB B PC CARD
PC CONTROL
IN
IN OUT
OUT SC TRIGGER REMOTE 2REMOTE 1LAN
AC IN 
AUDIO
AUDIOAUDIO OUT
R
R/Cr
G/Y
B/Cb
V
H/
   HV
RL/MONO
RL/MONORL/MONOL/MONO
SLOT 1 SLOT 2DVI
RGB OUT
RGB 1
RGB 2
VIDEOS-VIDEOVIDEOS-VIDEO
VCR/ Laser disc player
Connecting Your VCR or Laser Disc Player
Audio equipment S-video cable (not supplied)
Video cable (not supplied)
Audio cable (not supplied)
Use common RCA cables (not provided) to connect your VCR, laser disc...

2-17
2. Installation
Connecting to a Network
With the LAN connection, you can control the projector over the network using a computer to switch the unit on/off, select the input and others.
* To control the projector over the network using a computer, use the Dynamic Image Utility 2.0 contained on the User Supportware CD-ROM or the
HTTP Server feature.
* With the Image Express Utility 1.0 contained on the supplied User Supportware CD-ROM, you can project your PC screen image to the projector
over the...

2-18
2. Installation
Connecting the Supplied Power Cable
Connect the supplied power cable to the projector.
First connect the supplied power cable's three-pin plug to the AC IN of the projector, and then connect the other plug of the supplied power cable in the
wall outlet.
AUDIO
AU
DIO O
UT
R
R/Cr
G/Y
B/Cb
V
H
/
H
V
RL
/
M
O
N
O
RL
/
M
O
N
ORL
/
M
O
N
O L
/
M
O
N
O
DVI
R
G
B
 O
U
T
RGB 1RGB 2AUDIOS
L
O
T
 1S
L
O
T
 2
VIDEOS-VIDEO
P
C
 C
O
N
T
R
O
L
IN
I
N O
UT
OUT S
C
 TR
IG
G
ERR
E
M
O
T
E
 2 R
EM...

3
Projecting an Image
(Basic Operation)
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
zTurning on the Projector ............................................ 3-2
x Selecting a Source ................................................... 3-3
c Adjusting the Picture Size and Position .................... 3-3
v Correcting the Horizontal and
Vertical Keystone Distortion (3D Reform) ................ 3-4
b Optimizing RGB Picture Automatically ..................... 3-6
nTurning Up or Down Volume...

3-2
3. Projecting an Image
This chapter describes how to turn on the projector and to project a pic-
ture onto the screen.
z Turning on the Projector
NOTE:
• When plugging in or unplugging the supplied power cable, make sure that the
main power switch is pushed to the off[O] position. Failure to do so may cause
damage to the projector.
• The projector has two power switches: A main power switch and a POWER but-
ton (POWER ON and OFF on the remote control)
• The projector has a feature to prevent itself...

3-3
3. Projecting an Image
x Selecting a Source
Selecting the computer or video source
Using the Remote Control
Press the Source/Number button (0-9) to se-
lect input.
1 ...... RGB 1 input
2 ...... RGB 2 input
3 ...... DVI (DIGITAL) input
4 ...... VIDEO input
5 ...... S-VIDEO input
6 ...... Viewer
7 ...... LAN
8 ...... SLOT 1
9 ...... SLOT 2
0 ...... Sequentially selects:
RGB1 (VIDEO) → RGB2 (S-VIDEO) →
RGB1 (VIDEO) ........
NOTE: If no input signal is available, the projector will display a blue...

3-4
vCorrecting the Horizontal and Vertical
Keystone Distortion (3D Reform)
Use the 3D Reform feature to correct keystone (trapezoidal) distortion to
make the top or bottom and the left or right side of the screen longer or
shorter so that the projected image is rectangular.
In the following description, 3D Reform (Cornerstone) correction can be
done with the USB mouse, remote control or cabinet buttons.
When using the USB mouse connected to the projector
Preparation: Connect the USB mouse to the...

3-5
3. Press the 3D REFORM button on the remote control.
The Cornerstone adjustment screen is displayed.
The Cornerstone adjustment screen will disappear when you move the
USB mouse cursor.
4. Point to one of the remaining 3 corners and left-click on it.
Screen
5. Do the above step 4 for the other two corners so that the projected area
becomes smaller than the screen.
Screen
Left-click on each corner.
Left-click on the corner.
Screen
Projected image
(The drawing shows the upper right corner.)
3. Press...