NEC Gt1150 Lcd Projector Users Manual

E Ð 22
Other adjustments
Rotate the projector to make the
image square.
Use keystone correction for
proper adjustment.
Rotate the four feet to make the
image square to the screen.
REMOTE 1 PC CONTROL
REMOTE2
AC IN  SC, TRIGGER OUTOUT IN
D
V
IL
/M
O
N
O
L
/M
O
N
O
R
G
B
 1
R
G
B
 2
V
ID
E
O
 1
V
ID
E
O
 2
S-
V
ID
E
O
A
U
D
IO
 O
U
T R
/C
rG
/YB
/C
b
V
H
/H
V M
O
N
IT
O
R
 O
U
TR
L
/M
O
N
OR
L
/M
O
N
ORL
/M
O
N
OR R
UpDown Each of the feet height can be changed up to 20 mm or at angles up to
3.5 degrees. 

E Ð 23
4. CONNECTIONS
When used in standalone operation
Connecting Your VCR Or Laser Disc Player
Use common RCA cables (not provided) to connect your VCR or laser disc player to your GT1150 Projector. To
make these connections, simply:
1. Turn off the power to your projector and VCR or laser disc player.
2. Connect one end of your RCA cable to the video output connector on the back of your VCR or laser disc
player, connect the other end to the Video input on your projector. Use standard RCA audio patch...

E Ð 24 Connecting Your DVD Player with Component Output
Use the optional Component V cable to connect your DVD player with the component output to your GT1150
Projector. To make these connections, simply:
1. Turn off the power to your projector and DVD player.
2. Use the optional Component V cable to connect your DVD player to the RGB 1 input or use a D-Sub 15 pin
cable to the RGB 2 input of your GT1150 projector.
3. Turn on the projector and the DVD player.
DVI L/MONO
L/MONO
RGB 2
RGB 1
VIDEO 1
VIDEO 2...

E Ð 25 Connecting Your PC Or Macintosh Computer
Connecting your PC or Macintosh computer to GT1150 Projector will enable you to project your computers screen
image for an impressive presentation.
To connect to a PC or Macintosh :
1. Turn off the power to your projector and computer.
2. Use the supplied RGB signal cable to connect your PC or Macintosh computer to the projector.
3. Turn on the projector and the computer.
4. If the projector goes blank after a period of inactivity, it may be caused by a...

E Ð 26 Connecting an External Monitor
You can connect a separate, external monitor to your GT1150 projec-
tor to simultaneously view on a monitor the RGB analog, DVI analog,
or component image youre projecting. To do so:
1. Turn off the power to your projector, monitor and computer.
2. Use a 15-pin cable to connect your monitor to the RGB MONI-
TOR OUTPUT (Mini D-Sub 15 pin) connector on your projector.
3. Turn on the projector, monitor and the computer.
NOTE:
* The MONITOR OUT connector outputs RGB...

E Ð 27 Connecting to a Single Workstation
You can connect a workstation to your GT1150 projector. To do so:
1. Turn off the power to your projector  and workstation.
2. Use a BNC x 5 cable to connect your workstation and the RGB 1 connectors on your projector.
3. Turn on the projector and a workstation.
DVI L/MONO
L/MONO
RGB 2
RGB 1
VIDEO 1
VIDEO 2
S-
VIDEO AUDIO OUTR/Cr G/Y B/Cb
V H/HV MONITOR OUTR
L/MONO R L/MONO R
L/MONO R L/MONO RR
To RGBHV output To RGBHV output
Signal distributionBNC25 cable
To...

E Ð 28
REMOTE 1 PC CONTROL
REMOTE2
SC, TRIGGER OUT OUTIN IN
RGB 2
RGB 1
VIDEO 1
VIDEO 2
S VIDEO AUDIO OUTR/Cr G/Y B/Cb
V H/HV MONITOR OUT
L/MONO R L/MONO R
L/MONO R L/MONO R
When Used with One Switcher (ISS-6020/ISS-6020G)
Up to 10 input signals can be accepted when the projector is connected to one Switcher. Using the projector with
the Switcher allows easy adjustment and signal selection.
ISS-6020
Personal computer
VCR
To REMOTE1To RGBHV output
Optional control cable 15p-15p
(CTL-6010)To audio input...

E Ð 29
When Used with Two or More Switchers  (100 Inputs)
Up to 100 inputs can be accepted using the NEC ISS-6020 Switcher.
How to make connections:
1 Connect the REMOTE 1 terminal of the master Switcher to the REMOTE 1 of the projector using the
optional control cable (15p-15p/CTL-6010).
2 Next connect the REMOTE 2 terminal of the master Switcher to the REMOTE 1 terminal of the first slave
Switcher using the same optional control cable as mentioned above. Third, connect the REMOTE 2 termi-
nal of the...

E Ð 30 Set the DIP switch (S8601) of the Switcher as follows:
The Projector
Slot 1 of the Master
Slot 2 of the Master
Slot 3 of the Master
Slot 4 of the Master
Slot 5 of the Master
Slot 6 of the Master
Slot 7 of the Master
Slot 8 of the Master
Slot 9 of the Master
Slot 10 of the MasterMaster
Slave 1
Slave 2
Slave 3
Slave 4
Slave 5
Slave 6
Slave 7
Slave 8
Slave 9
Slave 10 ISS-6020
ISS-6020GOutput toSetting of S8601
NOTE: Slave numbers 1 to 10 must correspond to the masterÕs slot numbers 1 to 10.
OPEN...

E Ð 31 REMOTE 1 Connector
Pin Configuration of Optional CTL-6010 Cable
REMOTE 1 connector
of the Switcher mini D-
sub 15 pin (female) REMOTE 1 connector of
the Projector mini D-sub
15 pin (female)
Shield (frame ground)
Pins without a number are open.
51423
10
11 12 13 14 156 978
This connector is used for either connecting the ISS-6020/ISS-6020G Switcher or a third
party external control device. When the Switcher is used, connect it with the optional control
cable (15-15 pin; 50 ft./16m; CTL-6010) to...