NEC Accusync Lcd224wm Users Manual

English-10
CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN
REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE
FOLLOWING WHEN YOU POSITION THE MONITOR:
• For optimum performance, allow 20 minutes for warm-up.
• Adjust the monitor height so that the top of the screen is at or slightl\
y below eye level. Your eyes should look slightly downward when viewing the middle of the sc\
reen.
• Position your monitor no closer than 40 cm and no further away than 70 cm from your eyes. The optimal distance is 50...

English
English-11
Specifications
Monitor Specifications AccuSync LCD224WM Monitor Notes
LCD Module Diagonal: 55.9 cm/22 inches Active matrix; thin film transistor (TFT)Viewable Image Size: 55.9 cm/22 inches liquid crystal display (LCD); 0.282 mm dot
Native Resolution (Pixel Count): 1680 x 1050 pitch; 300 cd/m
2 white luminance, 1000:1
contrast ratio, typical.
Input Signal Video: ANALOG 0.7 Vp-p/75 Ohms Sync:Separate sync.TTL Level (Positive/Negative)
Horizontal sync. Positive/Negative
Vertical sync....

English-12
Features
Reduced Footprint: Provides the ideal solution for environments requiring superior image q\
uality but with size and weight
limitations. The small footprint and low weight allow it to be moved or transported easil\
y from one location to another.
AccuColor Control Systems:  Allows you to adjust the colours on your screen and customize the colour\
 accuracy of your
monitor to a variety of standards.
OSD (On-Screen Display) Controls:  Allow you to quickly and easily adjust all elements...

English
English-13
Troubleshooting
No picture• The signal cable should be completely connected to the display card/comp\
uter.
• The display card should be completely seated in its slot.
• Check front power Switch and computer power switch should be in the ON p\
osition.
• Check to make sure that a supported mode has been selected on the displa\
y card or system being used. (Pleaseconsult display card or system manual to change graphics mode.)
• Check the monitor and your display card with respect to...

English-14
TCO’03Congratulations!
The display you have just purchased carries the TCO’03 Displays
label. This means that your display is designed, manufactured and
tested according to some of the strictest quality and environmental
requirements in the world. This makes for a high performance
product, designed with the user in focus that also minimizes the
impact on our natural environment.
Some of the features of the TCO’03 Display requirements:
Ergonomics • Good visual ergonomics and image quality in...

English
English-15
NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees re\
cycling as one of the company’s
top priorities in trying to minimize the burden placed on the environmen\
t. We are engaged in developing environmentally-
friendly products, and always strive to help define and comply with the \
latest independent standards from agencies such as
ISO (International Organisation for Standardization) and TCO (Swedish Trades Union).
Disposing of your old NEC product
The...