NEC 60xp10 Users Manual

English
English-8
Using the Remote: 
Install the remote control batteries.
Th  e remote control is powered by AA batteries. To install or 
replace batteries:
  A.  Press and slide to open the cover.
  B.  Align the batteries according to the (+)    
    and (–) indications inside the case.
  C.  Replace the cover.
CAUTION: Incorrect usage of batteries can result in leaks or 
bursting. NEC recommends the following battery use:
Place “AA” size batteries matching the (+) and (-) signs 
on each battery to...

English-9
Part Names and Functions
Control Panel
 1)  POWER
Switches the power on/standby.
 2)  MUTE
Switches the audio mute ON/OFF.
 3)  INPUT
Switches between input sources.
Acts as SET button within the OSD menu.
 4)  PLUS (+)
Increases the setting adjustment within OSD menu.
 5)  MINUS (-)
Decreases the setting adjustment within OSD menu. 
 6)  UP ( )
Increases the volume level when the OSD is off .
Moves area up to select which setting to is to be adjusted 
within OSD menu.
 7)  DOWN ( )
Decreases...

English
English-10
EXTERNAL CONTROLOUT
2
IN
S-VIDEO IN
DVI AUDIO3R
L(MONO)
R
L
(MONO)
R
L
(MONO)AUDIO2 AUDIO1 VGAHD VD
R/Cr/Pr G/Y B/Cb/pb
RGBHV / DVD/HD2Y Cr/Pr Cb/Pb
DVD/HD1IN
IN/OUT
VIDEO AC INRLSPEAKER (S)
1
3456789
12
11101314
Part Names and Functions
  1)  EXTERNAL CONTROL OUT (D-Sub 9 pin)
Connect RS-232C output to a second monitor. 
  2)  EXTERNAL CONTROL (D-Sub 9 pin)
Connect RS-232C input to external equipment such as a 
PC in order to control RS-232C functions. 
 3)  DVI
Input digital RGB...

English-11
Part Names and Functions - continued
 1)  POWER ON/STANDBY
Switches the power on/standby. 
*If the Power Indicator on the display is not glowing, 
then no controls will work.
 2)  VIDEO
Switches the input signal to the VIDEO source.
 3)  RGB
Switches the input signal to the RGB source.
 4)  DVD/HD
Switches the input signal to the DVD/HD source. 
 5)  PICTURE MODE
Selects Picture Mode: [STANDARD], [BRIGHT],  
[CINEMA1], [CINEMA2], [DEFAULT]. 
  STANDARD: for viewing in a bright room
  BRIGHT:...

English
English-12
POWER
To turn the unit ON and OFF:
1. Plug the power cord into an AC outlet.
2. Press the Power button (on the unit).
Th  e monitor's ON/STANDBY indicator turns red and the 
unit will be in STANDBY mode.
3. Press the POWER ON button on the remote control. Th e 
ON/STANDBY indicator will turn green when the unit is 
active.
4. Press the STANDBY button (on the remote) or the Power 
button (on the unit) to turn off   the monitor.
DISPLAY
To check display settings press the DISPLAY...

English-13
REMOTE CONTROL ID
Th  e remote control included with the display can be used 
to control up to 26 individual monitors using what is 
called the REMOTE CONTROL ID mode. Th e REMOTE 
CONTROL ID mode works in conjunction with the Monitor 
ID, allowing control of up to 26 individual monitors. For 
example: if there are many monitors being used in the same 
area, a remote control in normal mode would send signals to 
every monitor at the same time Figure 1. Using the remote 
in REMOTE CONTROL ID...

English
English-14
On-Screen Display (OSD)
Using the OSD
Use the Remote Control or the control panel on the front 
of the unit to enter the on-screen display menu to adjust 
settings.
1. Press the MENU button on the remote or the EXIT button 
on the Control Panel.
2. Use the up and down buttons to select the desired menu.
3. Press the SET button to select a sub-menu or item for 
adjustment.4. Change the setting or adjustment by pressing  the + and 
- buttons on the Control Panel or the Remote Control.
5....

English-15
On-Screen Display (OSD)
Main Menu Sub Menu Sub Menu2 Sub Menu3 Explanation Default Reset
PICTURE CONTRAST Adjusts the image brightness in relationship to the white 
level. Press + or - to adjust.50 YES
BRIGHTNESS Adjusts the image brightness in relationship to the 
background. Press + or - to adjust.50 YES
SHARPNESS Adjusts the crispness of the image. Press + or - to adjust. 50 YES
COLOR Adjusts the color depth of the screen. Press + or - to 
adjust.50 YES
TINT Adjusts the tint of the screen....

English
English-16
On-Screen Display (OSD)
Main Menu Sub Menu Sub Menu2 Sub Menu3 Explanation Default Reset
SCREEN ASPECT MODE Selects aspect ratio of the displayed image.  Press + or 
- to select.
V-POSITION Controls the ver tical position of the image within the 
Display area of the PDP.
Press + to move up. Press - to move down.0YES
H-POSITION Controls the horizontal position of the image within the 
Display area of the PDP.
Press + to move right. Press - to move left.0YES
V-HEIGHT Adjusts the ver...

English-17
On-Screen Display (OSD)
Main Menu Sub Menu Sub Menu2 Sub Menu3 Explanation Default Reset
OPTION2
Available only 
when the 
Advanced OSD 
function is 
enabled.POWER SAVE Sets how long the monitor waits before going into power 
save mode after a signal is lost.
VGA, RGBHV, and DVI input and Separate HV Sync. only.OFF YES
FILM MODE Selects Film mode. ON YES
SCREEN SAVER Use SCREEN SAVER functions to reduce the risk of image 
retention.
PLEPLE : The brightness is decreased in order of Lock mode....