Namco World Kicks 2 Game Controls Adjustments Parts Manual

							Page 11 2-1-4 Sound Test
1. Select “SOUND TEST” on the menu screen to adjust the volume and test
the sound. The following screen is displayed.
2. Use the Service button to choose the required item then press the Test
button.
3. Use the Test button to change the selected item settings
Note: Item (c) only. To select the digit to be adjusted press the Service
button. To change the digit number press the Test button. Press the Player 1
Start Button to produce the sound selected.
4. Select “EXIT” and press the Test button to return to the menu screen.
(a) Attract sound ON or OFF
(b) Selects sound output as ON - stereo or OFF - mono
(c) Each number will produce a different sound each time the Player 1 Start
switch is pressed. (for a maximum of 10 seconds.)
000 when selected will produce a sound from the left speaker only, then the
right speaker only and then both speakers together as a stereo check.
(d) Displays the sound code selected by REQUEST. “NO SOUND” is displayed
if there is no corresponding sound file for the selected number
SOUND TEST
[DEFAULT IN GREEN]
ATTRACT SOUND ON
SPEAKER OUT STEREO
REQUEST SONG N0. 000
MESSAGE STEREO CHECK
EXIT(a)
(b)
(c)
(d)
CHOOSE: SERVICE SW   ENTER:ENTER SW
REQUEST ON/OFF: P1 - START 
						

							Page 12 2-1-5 Game Options
1. Select “GAME OPTIONS” on the menu screen to set the game settings.
The following screen is displayed.
2. Use the Service button to choose the required item then press theTest
button.
3. Use the Service button to change the setting and press the Test button to
return to item selection.
4. Select “EXIT” and press the Test button to return to the menu screen.
GAME OPTIONS
[ DEFAULT IN GREEN]
(VS CPU MODE )
(a)
(b)
(c)
(d)
(e)
(f)
(g)
(h)
(i)
(j)
(k)
EXIT
SELECT:SERVICE SW    ENTER:TEST SW OPERATE MODE 2P
LANGUAGE ENG
AUTO SCORE INITIALIZE  OFF
GAME TIME  90 (SEC )
GOLDEN GOAL TIME  30 (SEC )
PK MATCH  NORMAL
GAME DIFFICULTY  C (HARD )
GAME TIME  90 (SEC )
GOLDEN GOAL TIME  30 (SEC )
PK MATCH  NORMAL
RETURN MATCH MODE  OFF
(VS PLAYER MODE )
NOTES:
1. Play mode setting is automatic. 2P  for single cabinet play / 2P ON 2P for two
cabinets linked.
2. Only the instructions of how to kick the ball during the attract mode are available
in the selected language, All other texts shown on the screen are in English.
m e t Ino i t p i r c s e Dte S y r o t c a F
) a ()w o l e b 1 e t o n e e s ( g n i t t e S e d o M y a l P
1
) b (, ) h s i n a p S ( P S E , ) n a m r e G ( R E G , ) h c n e r F ( A R F , ) h s i l g n E ( G N E : e g a u g n a L
) w o l e b 2 e t o n e e s ( ) e s e n i h C ( N H C , ) n a e r o K ( R O K , ) n a i l a t I ( A T IG N E
) c (e m a g t a d e z i l a i t i n i e r o c s h g i h N O n e h W ( F F O / N O : e z i l a i t i n I e r o c S o t u A
) p u r e w o pF F O 
						

							Page 13
m e t Ino i t p i r c s e Dte S y r o t c a F
) d (s c e s 0 0 3 , 0 4 2 , 0 8 1 , 0 5 1 , 0 2 1 , 0 9 , 0 6 , 0 3 h c t a M - U P C n i g n i t t e S e m i T e m a G
0 9
) e (T I M I L O N , F F O s c e s 0 9 , 0 6 , 0 3 , 5 1 h c t a M - U P C n i g n i t t e s e m i T l a o G n e d l o G
0 3
) f (FF O , T E S 5 , T E S 3 , L A M R O N h c t a M - U P C n i g n i t t e s h c t a m - K P
L A M R O N
) g () d r a H . V ( D , ) d r a H ( C , ) l a m r o N ( B , ) y s a E ( A h c t a M - U P C n i g n i t t e S y t l u c i f f i D e m a G
D R A H : C
) h (h c t a M d a e H - o t - d a e H n i g n i t t e S e m i T e m a G
s c e s 0 0 3 , 0 4 2 , 0 8 1 , 0 5 1 , 0 2 1 , 0 9 , 0 6 , 0 30 9
) i (h c t a M d a e H - o t - d a e H n i g n i t t e s e m i T l a o G n e d l o G
T I M I L O N , F F O s c e s 0 9 , 0 6 , 0 3 , 5 10 3
) j (F F O , T E S 5 , T E S 3 , L A M R O N h c t a M d a e H o t - d a e H n i g n i t t e s h c t a m - K P
L A M R O N
) k (FF O / N O g n i t t e S h c t a M n r u t e R
F F O 
						

							Page 14 2-1-6 Coin Options
1. Select “COIN OPTIONS” on the menu screen to set the game cost and
related settings. The following screen is displayed.
2. Use the Service button to choose the required item then press the Test
button.
3. Use the Service button to change the setting and press the Test button to
return to item selection.
4. Select “EXIT” and press the Test button to return to the menu screen.
Note:- If the cabinet is fitted with a CashFlow Acceptor the price of play is set within the
Cashflow Coin Mech. Ensure that the Game Cost is set to 1 Coin 1 Credit.
COIN OPTIONS
[DEFAULT IN GREEN]
SELECT: SERVICE SW     ENTER:TEST SW
(a)
(b)
(c)
(d)
(e)
(f)
(g)
(h)
(i)GAME COST 1 COIN(S)  1 CREDIT
CONTINUE COST 1 COIN(S)  1 CREDIT
RETURN MATCH COST 1 COIN(S)  1 CREDIT
FREE PLAY OFF
1 CREDIT FOR 2 PLAYERS ON
COIN SHUTE1 MECHANICAL VALUE 1COIN COUNT AS 1 CREDIT
COIN SHUTE2 MECHANICAL VALUE 1COIN COUNT AS 1 CREDIT
CREDIT MODE EACH ONE
COIN COUNTER 2COUNTER(S)
EXIT
NOTES:
1. The Continue price and the Return Match price cannot be greater than the
normal price of play.
2. When Free Play is set to ON, press the start buttons to start a game.
3. When 1 credit for 2 players is set to ON, both players can play with 1 credit.
4. Left and Right chutes only available with mechanical coin mechanisms.
5. This is automatically set if a second cabinet is linked.
m e t Ino i t p i r c s e Dte S y r o t c a F
) a (ya l p e m a g 1 r o f d e r i u q e r s t i d e r c f o r e b m u N
1
) b ()w o l e b 1 e t o n e e s ( y a l p e u n i t n o c a r o f d e r i u q e r s t i d e r c f o r e b m u N
1
) c (hc t a m n r u t e r r o f d e r i u q e r s t i d e r c f o r e b m u N
1
) d ()w o l e b 2 e t o n e e s ( F F O / N O g n i t t e s y a l P e e r F
F F O
) e ()w o l e b 3 e t o n e e s ( F F O / N O y a l p n o s r e p 2 r o f t i d e r c 1
F F O
) f () w o l e b 4 e t o n e e s ( ) e t u h c t f e l ( n i o c 1 r o f d e h s i l b a t s e s t i d e r c f o r e b m u N
1
) g () w o l e b 4 e t o n e e s ( ) e t u h c t h g i r ( n i o c 1 r o f d e h s i l b a t s e s t i d e r c f o r e b m u N
1
) h ()w o l e b 5 e t o n e e s ( E N O H C A E / N O M M O C e d o M t i d e r C
N O M M O C 
						

							Page 15 2-1-7 ADS Data
This screen is used to view the various bookkeeping data for the game.
Data can only be reset from the DATA Clear option on the Main Menu screen.
(see 2-1-7 page 13)
After checking the bookkeeping data, select EXIT and press the Test button to
return tp the Main Menu screen.
2-1-8 Data Clear
1. Select “DATA CLEAR” on the menu screen to set the game cost and related
settings. The following screen is displayed.
2. Use the Service button to choose the required item then press the Test
button.
3. Use the Service button to select YES /NO and press the Test button to clear
the data for that item.
4. Select “EXIT” and press the Test button to return to the menu screen.
(a) Initializes the ADS Data
(b) Initializes the Top Score Ranking Data
(c) Returns Game and Coin options to default setting.
(d) Initializes all data  (a, b, c above)
(e) Enters the PCB Internal Test.
(f) Returns to the Main Menu Screen
DATA CLEAR
SELECT: SERVICE SW     ENTER:TEST SW
(a)
(b)
(c)
(d)
(e)
(f)ADS DATA CLEAR
RANKING CLEAR
SET DEFAULTS ALL OPTIONS
ALL CLEAR
GOTO NAOMI TEST MODE
EXIT 
						

							Page 16
3. INITIALIZATION
Adjustments when Replacing Parts
The following operation 
must always be performed after replacing the NAOMI Game
PCB, Joystick Potentiometers or initializing the backup data..
The game will not operate correctly if these adjustments are not made.
1. Press the Test and Service buttons together. The following screen is displayed.
2. Ensure that all joysticks are in their central position, then press the Service button
to initialize the setting details.
3. Press the test button to go to the Switch Test and confirm correct joystick
operation. (see page 10 for test details)
I/F INITIALIZE
ENTER:TEST SW GO TO [ SWITCH TEST] KEEP STICKS CENTER POSITION
AND PRESS SERVICE SW 
						

							Page 17
13
2
9 86
11
10
4. PARTS
m e t Ino i t p i r c s e DoN t r a P
1pa C n o t t u B5 0 6 - 8 9 6 - P 2 K W X
2le z e B n o t t u B6 0 6 - 8 9 6 - P 2 K W X
3tf a h S n o t t u B7 0 6 - 8 9 6 - P 2 K W X
6gn i r p S n o t t u B0 1 6 - 8 9 6 - P 2 K W X
8tu N k c o L2 1 6 - 8 9 6 - P 2 K W X
9dr a o B C P k c i K8 1 6 - 8 9 6 - P 2 K W X
0 1ys s A k c i t s y o J6 8 1 0 0 0 7 4
1 1re t e m o i t n e t o P3 2 0 - 8 0 0 X
m e t Ino i t p i r c s e DoN t r a P
l a c e D p o T l a s r e v i n U r e y a l P 2 s k c i K d l r o W5 9 5 0 0 0 0 4
l a c e D n o i t c u r t s n I r e y a l P 2 s k c i K d l r o W6 9 5 0 0 0 0 4
) l a n r e t n I ( s s e n r a H B S U7 6 6 - 5 6 6 X
) 0 5 1 - U P M ( y l p p u S r e w o P e d o M h c t i w S4 1 0 0 0 0 3 8
B C P i m o a N r e y a l P 2 k c i K d l r o WB C P E M A G - P 2 K W X
B C P F I 6 2 2 VB C P F I - K W X
B C P 2 r e i f i l p m AB C P M A - C T X
PARTS NOT SHOWN 
						

							For all Parts or Technical Support contact:
Brent Spares,
Namco House,
Units 5-8, Acton Park Estate,
The Vale,
London. W3 7QE
Web Site: http://www.Namco.co.uk
For Technical Support, Warranty and
Advance Replacement Parts: 
+44 (0)20 8324 6120
For Consumable Parts: 
+44 (0)20 8324 6102
Fax for both: +44 (0)20 8324 6126