Namco Gun Survivor 2 Service Manual
Here you can view all the pages of manual Namco Gun Survivor 2 Service Manual. The Namco manuals for Games are available online for free. You can easily download all the documents as PDF.
Page 71
Page 71 6. Remove the 4off pozi head screws (M6x25), with flat and spring washers, and large flat washer. 7. Remove the Monitor by tilting it forwards from the top and withdrawing from the front. 8. Reassemble in reverse order. Pozi head screw (M6x25) with flat and spring washers Flat washer Monito r Pozi head screw (M6x25) with flat and spring washers
Page 72
Page 72 7-6 Replacing the Fluorescent Tube or Starter 1. Remove 4off security screw (M6x25). 2. Slacken the 4off pozi head screws ((M6x16) and remove the Header Acrylic Support. 3. Replace the Fluorescent Tube. Header Acrylic SupportFlat washer Security screw (M6x25) Pozi head screw (M6x16) Security screw (M6x25)Flat washer
Page 73
Page 73 4. Remove 4off pozi head screws (M6x16) and remove the Filter Base. 5. Replace the Starter. 6. Reassemble in reverse order. Pozi head screw (m6x16) Filter Base Pozi head screw (M6x16)Starter
Page 74
Page 74 7-7 Replacing the FCA PC Board 1. Separate the Gun Cabinet from the Monitor Cabinet. (see 5-1 page 35) 2. Disconnect the connectors on the FCA PC Board. 3. Remove 4off pozi flange screws (M5x12) and remove the FCA PC Board. 4. Reassemble in reverse order. Gun Cabinet Pozi flange screw (M5x12) FCA PC Board Connectors Connector Pozi flange screw (M5x12)
Page 75
Page 75 7-8 Replacing the NAOMI Board 1. Remove 10off pozi flange screws (M4x6) and remove the NAOMI panel. 2. Disconnect the 8 connectors from the NAOMI board. Note: The communication cables are fibre-optic cables. Do not bend excessively. Pozi flange screw (M4x6) NAOMI Panel Pozi flange screw (M4x6)
Page 76
Page 76 3. Remove 2off pozi head screws (M5x12) and withdraw the NAOMI base assy. 4. Remove 12off pozi flange screws (M4x6) and remove the NAOMI cover.
Page 77
Page 77 5. Remove 4off pozi flange screw (M4x6) and remove the NAOMI Assy. 7. Reassemble in reverse order. Note: Take care when reconnecting the communication cables. Ensure that they are connected as follows:- Connect the end marked “R” or coloured Red to the right hand connector. Connect the end marked “T” or coloured Black to the left hand connector. The communication cable is a fibre-optic cable. Do not bend excessively.
Page 78
Page 78 8. PARTS 8-1 Monitor Cabinet 22 CASHFLOW 5447
Page 79
Page 79 m e t Ino i t p i r c s e DoN t r a P 3tr o p p u S x e p s r e P d e t n i T2 8 4 0 0 0 7 4 4tr o p p u S x e p s r e P r e d a e H3 8 4 0 0 0 7 4 5xe p s r e P d e t n i T8 8 0 0 0 0 9 3 6xe p s r e P r e d a e H3 7 0 0 0 0 0 3 7le n a P y a l p s i D r a e R r e d a e H5 6 6 0 0 0 0 4 8te k c a r B t r o p p u S l a n r e t n I4 8 4 0 0 0 7 4 9SH L - l a c e D n o i t i t r a P6 6 6 0 0 0 0 4 0 1SH R - l a c e D n o i t i t r a P7 6 6 0 0 0 0 4 1 11r e y a l P - r e p p U l a c e D n o i t c u...
Page 80
Page 80 8-2 Gun Cabinet 12